Conair GSP1 Manual

Conair Ikke kategoriseret GSP1

Læs nedenfor 📖 manual på dansk for Conair GSP1 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
TO PRESS TWO SIDES AT ONCE
You can take advantage of
the two heated aluminum
plates on the interior of the
unit to simultaneously press
two sides of a garment.
5. If plates are locked,
unlock them by sliding
the lock button to the unlocked position. Use
caution as the plates may be hot.
6. Place a section of your garment between the
two heated plates, trapping it by squeezing
the middle of the unit so that the plates
come together. While maintaining the tension,
slowly pull the unit to the edge of the
garment. At the edge, release the pressure
on the handle and repeat the process on
additional sections of the garment until
wrinkles are removed. It may be necessary
to repeat the process on certain sections to
achieve the look you want.
The slower you pull, the fewer passes your
garment will require.
TO STEAM
7. With the unit unplugged and cool, remove the
water tank by gripping it and pulling straight out.
8. Add cold distilled or purified water to water
tank until it is fully filled (up to 50 ml).
9. Return the water tank back to the unit.
10. Plug in the unit and press the power button.
The white Power/Ready Indicator Light will
blink for 30 seconds and then become solid
when appliance is ready to use.
11. Press the Normal Steam button and a
regular amount of steam will come out of
the plates. For tough wrinkles, press the
Turbo Steam button for turbocharged steam.
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
DANGER – Any appliance is electrically
live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always unplug appliance immediately
after use and before cleaning.
2. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
3. Do not place in or drop into water or
other liquids.
4. Do not reach for an appliance that has fallen
into water. Unplug immediately.
5. Use only in a dry area.
KEEP AWAY FROM WATER
SAFETY PRECAUTIONS
WARNING – The polyethylene bags
over the product or its packaging may be
dangerous. Keep these bags out of the reach of
babies and children.
Never use bags in cribs, children’s beds,
strollers, or playpens. The thin film may cling to
the nose and mouth and prevent breathing.
A bag is not a toy.
WARNING – Do not use this
appliance near bathtubs, showers, basins,
or other containers filled with water.
1. Use appliance only for its intended use.
2. To reduce the risk of electric shock, do not
immerse the appliance in water or other
liquids.
3. Do not operate appliance with a damaged
cord, or if the appliance has been dropped
or damaged. To reduce the risk of electric
shock, do not disassemble or attempt to
repair the appliance. Take it to a qualified
service person for examination and repair.
Incorrect reassembly or repair could cause
a risk of fire, electric shock, or injury to
persons when the appliance is used.
4. Do not use the unit if it has fallen or if it
appears to be damaged.
5. Close supervision is necessary for any appliance
being used by or near children. Do not leave
appliance unattended while plugged in.
6. Unplug the unit immediately if you have
problems when using it.
7. Unplug the unit after each use and before
filling or cleaning it.
8. This unit is not intended for use by people
(including children) with reduced physical,
sensory, or mental capabilities, or by persons
who lack experience or knowledge, unless
they are supervised or have been given
instructions beforehand on the use of the
unit by a person responsible for their safety.
Children should be supervised to make sure
they do not treat the unit like a toy.
9. Allow the unit to cool before storing.
10. Do not allow cord to touch hot surfaces. Let
appliance cool completely before putting
away. Loop cord loosely around appliance
when storing.
11. When emitting steam, this appliance may
cause burns if it is used too close to the
skin or eyes, or if it is used incorrectly.
To reduce the risk of contact with hot
water emitting from the steam vents, test
appliance before use by holding it away
from the body.
12. Do not steam, iron or press garments while
a person is wearing them.
13. Burns could occur from touching hot metal
parts, hot water, or steam. Use care when
you turn a steam appliance upside down –
there may be hot water in the reservoir.
14. Do not operate steamer without correctly
filling the water tank. Only use clean
cold water for filling this appliance. We
recommend the use of distilled or purified
cold water only.
15. To reduce the likelihood of circuit overload,
do not operate another high-wattage
appliance on the same circuit.
16. Use of an extension cord is not
recommended. If an extension cord is
absolutely necessary, a 13-ampere cord
should be used. A cord rated for less
amperage may overheat. Care should be
taken to arrange the cord so that it cannot
be pulled or tripped over.
17. Never yank cord to disconnect from outlet,
instead, grasp plug and pull to disconnect.
18. Use caution when carrying steamer, as it
may contain hot water.
GETTING TO KNOW YOUR STEAMER
Locking
Button
Power
Button/Ready
Indicator
Light
Normal Steam
Button
Turbo Steam
Button
Exterior Ceramic-Coated
Aluminum Plates
for Ironing
Removable
Water
Reservoir
19. Always disconnect appliance from electrical
outlet when filling with water or emptying,
and when not in use.
20. To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). This plug will fit in
a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do not
change the plug in any way.
NOTE: When first using the device, it is
recommended to test it on an old cloth or to
operate the steamer for 5 minutes, as there
may be sediment left from the manufacturing
process. Then unplug the unit and allow it to
cool. Empty container and refill before actually
using on your garments.
SAVE THESE
INSTRUCTIONS
IMPORTANT
FOR HOUSEHOLD USE ONLY
OPERATING
INSTRUCTIONS
GETTING STARTED
1. Plug the unit into an
outlet. Make sure that
no other high-wattage
appliances are plugged
into the same circuit.
2. Turn on by pressing the
power button. The white
indicator light will blink for 30 seconds and
then become solid when appliance is ready
to use.
WARNING: When pressing and ironing delicate
fabrics, we recommend moistening the fabric
beforehand or putting a damp cloth between
the unit and the fabric. To avoid staining, do not
moisten silk or synthetic fabrics.
TO IRON
3. Lay your garment on a
flat surface.
4. Use the unit in the locked
position (plates closed)
for ironing. Squeeze the
middle of the unit to close
the plates. Slide locking
button to locked position.
Use caution as the plates may be hot. Position
the unit over the area to be pressed and press
down using short strokes.
Interior
Ceramic-Coated
Aluminum Plates
for Pressing Two
Sides at Once
12. Hang up the garment and position the
closed/locked unit with the exterior ceramic
plates facing the area to be steamed.
Move the unit back and forth in slow, short
movements without touching the material.
Repeat until wrinkles have been removed.
13. Press the Normal or Turbo Steam button
again to stop the flow of steam.
TO STEAM IRON OR STEAM PRESS
14. To add the power of steam while ironing or
pressing, just follow steps #7, #8, #9, and
#10 prior to ironing or pressing and steps
#11 and #13 while ironing or pressing.
STEAMING TIPS
CAUTION: First, test unit on an inconspicuous
area of the item to be steamed to ensure fabric
can tolerate its effect. If there is no evidence of
damage, you may proceed to use the steamer
on that item.
1. Hang up the garment or fabric item.
NOTE: Avoid using metal clothes hangers,
if possible.
2. Hold fabric taut with one hand and the
steamer with the other. Pass the steam
jets just above the wrinkled fabric. It may
take a few passes to remove the wrinkles
completely. CAUTION: If garment is to be
steamed while hanging on a door, use
caution by protecting the door from potential
damage that could be caused by the steam.
3. After use, turn off the steam button, then
the power button. With dry hands, unplug
your Steam Stylist from the outlet. BE SURE
TO PRESS THE POWER BUTTON PRIOR TO
UNPLUGGING THE UNIT. Carefully empty
any remaining water from the tank to avoid
leakage.

Produkt Specifikationer

Mærke: Conair
Kategori: Ikke kategoriseret
Model: GSP1

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair GSP1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Conair Manualer

Conair

Conair MiniPRO CS80N Manual

1 Oktober 2024
Conair

Conair MASK2 Manual

1 Oktober 2024
Conair

Conair skn SFB11GK Manual

1 Oktober 2024
Conair

Conair Man GMTL6000 Manual

6 September 2024
Conair

Conair LNT1 Manual

6 September 2024
Conair

Conair Man GMT189R Manual

6 September 2024
Conair

Conair InfinitiPRO 998 Manual

3 September 2024
Conair

Conair CD117NN Manual

2 September 2024
Conair

Conair LLT2 Manual

2 September 2024
Conair

Conair CLS1X Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SKROSS

SKROSS World Adapter Pro+ Manual

26 November 2024
SKROSS

SKROSS PRO – World & USB Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024