Conair HC900RN Manual

Conair Ikke kategoriseret HC900RN

Læs nedenfor 📖 manual på dansk for Conair HC900RN (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Instruction Booklet

For your safety and continued enjoyment

of this product, always read the instruction

booklet carefully before using.

EVEN

P R O F E S S I O N A

CUT

maintain a short, even cut – easily!

Model HC900R

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety precau-

tions should always be taken, including

the following:

READ ALL INSTRUCTIONS

BEFORE USING

Keep away from water

FOR HOUSEHOLD USE ONLY

DANGER – Any appliance is electrically

live, even when the switch is off.

To reduce the risk of death or injury by

electric shock:

1. Always unplug appliance from

electrical outlet immediately after using

(except when charging unit).

2. Do not place or store appliance where it

could fall or be pulled into a tub or sink.

3. Do not use appliance while bathing or in

the shower.

4. Do not place appliance in, or drop into,

water or other liquid.

5. Do not reach for an appliance that has

fallen into water. UNPLUG IMMEDIATELY.

Dry location use only. DO NOT expose to

liquid, vapor or rain.

6. Unplug this appliance before cleaning.

7. Only use adapter that is specified with

this unit.

DO NOT REACH

INTO THE WATER

WARNING – To reduce the risk of

burns, electric shock, fire, or injury to persons:

1. Never leave a plugged-in appliance

unattended.

2. This appliance should not be used by

children or individuals with certain disabilities.

3. Use appliance only for its intended use as

described in this manual. Only use attachments

recommended by the manufacturer. Do not use

an extension cord to operate the appliance.

4. Never operate the appliance if it has a

damaged cord or plug, is not working properly,

has been dropped or damaged, or dropped into

water. Return the appliance to a Conair service

center for examination and repair.

5. Keep the appliance cord away from heated

surfaces.

6. Do not pull, twist or wrap the cord around

the appliance.

7. Never drop or insert any object into any

opening of the appliance.

8. Do not place the appliance on any surface

while it is operating.

9. Do not use the appliance with a damaged

or broken comb or with teeth missing from the

blades, as injury may result. Before each use,

make certain the blades are aligned properly

and oiled.

10. Do not use the appliance outdoors or

where aerosol (spray) products are being used

or oxygen is being administered.

11. Do not short the polarity (output cord).

Ensure jack is plugged into the unit before

plugging the adapter into outlet.

12. This power unit is intended to be correct

as per instruction booklet.

13. For connection to a supply not in the

U.S.A., use an attachment plug adapter of the

proper configuration for the power outlet.

14. Always attach plug to appliance first, then

to outlet. To disconnect, turn all controls to

"OFF", then remove plug from outlet.

15. When using the appliance with its cord,

be mindful of tangles or kinks in the cord.

If the cord becomes tangled during use,

turn the unit off and straighten cord before

operating again.

SAVE THESE

INSTRUCTIONS

USER MANUAL

The Conair for Men Even Cut Clipper is a

revolution in home hair cutting. The clipper’s

unique circular blades mean that it can

be used in any direction over the head to

maintain an all over even cut.

The clipper comes with adapter:

Adapter: CA15

Rating input: 100-240V AC 50/60Hz

Rating output: 3.0V DC 1500mA

FEATURES

• Corded or cordless operational clipper. Use

corded for continuous power while plugged

into the outlet or use cordless for total

flexibility and control during use.

• Ultra sharp stainless steel blades for fast,

precise cutting.

• Ergonomic design – it fits into the palm of

your hand.

• 2 adjustable comb guides for grades 1-4

(comb guide 1 cuts lengths 1/8", 1/4" and

3/8" and comb guide 2 cuts lengths 1/2").

• Includes barber’s comb, neck brush,

scissors, storage pouch, oil, and barber

cape.

The hair clipper is perfect for maintaining

a short even length all over. It has been

designed with a unique rotary cutting

system and circular comb guides to give

a guaranteed even finish. Because of this

revolutionary technology the cutting technique

differs somewhat to that of a normal clipper,

in fact this cutting technique is much simpler!

The Even Cut is designed for cutting grades 1-4

to an even length. It is not however, suitable

for layering or grading. A shorter hair style

length (1" or less is recommended), is needed

for initial use of this item. There are two comb

guides; the smaller comb guide is for grades

1-3 and the larger comb guide for grade 4.

Note Comb Guides section for detailed

breakdown of lengths.

Firstly, select the desired comb guide and

lock the length setting in place lining up the

grade length number to the grade setting

indicator line.

For the best results we advise you start

cutting the back of the head and with a

sweeping motion run from the back to the

front of your head concentrating on one area

until you reach the desired length.

Once you have completed this over your

whole head you should then finish using

circular motions as this ensures you achieve

a perfect even finish. Please note that when

you first begin cutting your hair you may

notice that some hair is being cut and other

hairs are left long. This is perfectly normal,

especially if you are cutting longer hair. This

is because hair grows in different directions

and the Easy Cut clipper is designed to be

used in all directions against the hair growth.

So continue cutting in all directions until all

hair is cut to length, then the use of circular

motions over the whole head will ensure an

even finish.

OPERATION

CHARGING INSTRUCTIONS

IMPORTANT - The Even Cut is so easy to use,

but before you do anything you must take your

time to charge the unit for 16 hours before its

first use. Even if you want to use it plugged in

straight from the outlet, this initial super-charge

ensures optimum power performance to give

smooth fast cutting every time. Only use the

adaptor supplied with this appliance. Using

other adaptors may cause a hazard.

• Before using for the first time, the

appliance should be fully charged

continuously for 16 hours. Maximum

battery capacity will only be reached after

3 charging and discharging cycles.

• Ensure the appliance is switched off.

• Insert the small plug on the charging adaptor

into the socket on the side of the appliance.

• Plug the charging unit into a suitable outlet

socket.

• The red charging indicator light on the power

handle will illuminate when the appliance is

correctly connected to the outlet.

• A full charge will supply enough power for

approximately 20 minutes of use.

OILING INSTRUCTIONS

IMPORTANT - It is highly recommended before

each use to oil the circular blades with the

oil provided. This ensures optimum cutting

performance.

For the first use you will need to use the oil

supplied with the product, unscrew the cap and

cut off the very end of the plastic tube with a

pair of scissors to release the oil.

Before each use, we recommend adding a few

drops of oil provided in the oil slots inside the

blade ring.

Oil Slot 1 Oil Slot 2 Oil Slot 3

PRESERVING THE BATTERIES

In order to maintain the optimum capacity of

the rechargeable batteries, the appliance has

to be fully discharged and then recharged for

16 hours every 3 months approximately.

COMB GUIDES

This appliance is supplied with 2 adjustable

comb guides that provide 4 cutting lengths

from grades 1-4.

CUTTING LENGTH GRADE

1/8" #1

1/4" #2

3/8" #3

1/2" #4

The comb guide with the shorter teeth will cut

at the 3 shorter lengths while the comb guide

with the longer teeth will cut at the 1 longer

length setting.

Grades 1-3 Grades 4

If you desire a grade 0 cut, the clipper can be

used without a comb guide for an ultra close,

even cut.

ATTACHING A COMB GUIDE

To attach a comb guide, make sure the

appliance is switched off. Hold the clipper with

the blades facing downwards and place the

comb guide over the top of the clipper with the

teeth of the comb facing downwards. Release

the comb guide locking mechanism, located

on the side of the appliance, by sliding it away

from the comb guide. Line up the dot indicator

on the comb guide (Fig. 1) with the grade

setting marker on the clipper (Fig. 1) then gently

rotate the comb guide in a counter-clockwise

direction until it clicks into place (Fig. 2). Make

sure that the locking mechanism is in the

locked position and the comb guide is securely

in place before using the clipper.

FIG. 1 FIG. 2

CHANGING THE COMB GUIDE

LENGTH SETTING

Comb guide 1 for grades 1-3, will lock into 3

different positions, providing 3 cutting length

grade settings. Comb guide 2 for grade 4,

locks into 1 position and provides 1 cutting

length grade setting. The comb guide will

be marked with its grade settings (Fig.3). In

order to change the grade setting release the

comb guide locking mechanism found on the

side of the clipper (Fig.4) and rotate the comb

guide either clockwise or anti-clockwise as

appropriate (Fig.5). Line up the grade setting

you want with the ‘I’ mark on the clipper. Make

sure that the locking mechanism is in the

locked position and the comb guide is securely

in place before using the clipper.

FIG. 3 FIG. 4 FIG. 5

REMOVING A COMB GUIDE

To remove the comb guide unclip the guide-

locking mechanism found on the side of

the clipper and rotate the comb guide in a

clockwise direction until it is completely free

of the clipper.

PREPARATION FOR USE

• Always inspect the appliance for noticeable

signs of damage. Do not use if damaged.

• Always inspect the appliance before use

to ensure the clipper blades are free

from hair, debris etc. (see Cleaning &

Maintenance of clipper).

• Prior to use always inspect the head for

warts, moles, spots and broken skin. If using

the clipper on yourself either use mirrors or

ask another person to check for you. Special

care should be taken when cutting hair

in areas that have warts, moles, spots or

broken skin, to prevent injury.

• Remove any head jewelry such as earrings

and necklaces before use.

• For best performance use on clean, dry hair

that has been combed until tangle-free.

• If hair is long, use the scissors and comb

provided to cut the hair prior to using the

clipper.

• Ensure the appliance is sufficiently charged

or plugged into the outlet.

NOTE: The appliance should not be used for

longer than 15 minutes when operated from

the outlet.

WARNING - The clipper is for use only

on the head. Never use the clipper on the face

or any other area of the body.

IMPORTANT - Do not attempt to trim hair close

to your ears with the clipper. Never allow ears

to enter the ring of the clipper blade.

CLIPPING

• Attach a comb guide as required. Note

Comb Guides section for specific lengths.

• Switch on the clipper using the on/off

sliding switch located on top of the clipper

and the blades will start to move and the

green LED will illuminate.

• Begin cutting on the top of your head.

Slowly and gently steer the clipper around

the scalp, taking care on areas where there

may be warts, moles, spots and broken

skin and keep away from the ears.

• Again, remember you must have a shorter

hair style, length to begin, as this item will

not work on longer, layered hair.

FOR BEST RESULTS USE IN A

CIRCULAR MOTION.

• The clipper can be moved in any direction

to cut your hair. Only apply gentle pressure.

Never force the clipper - if resistance is

experienced lift clipper away from the head,

empty hair from the clipper and resume

clipping.

• If using on areas where there are folds of

skin, ensure the skin is stretched taught prior

to cutting hair in this area.

• If you experience any discomfort stop using

immediately.

• NOTE - Hair will collect in the area inside

the blade ring. This may need to be emptied

before all the hair has been cut. Switch the

clipper off and remove any hair by simply

tapping gently on the top of the clipper.

• If you require a grade 0 cut, the clipper can

be used without a comb guide attached for

an ultra close, even cut.

CLEANING & MAINTENANCE OF CLIPPER

To maintain optimum performance, the

appliance should be cleaned after each use:

• Remove the comb guide after use. Rinse the

comb guide under running water and dry

thoroughly before storage or use.

• Never place the clipper under running water.

• After each use ensure hair is emptied from

the blade area and use the cleaning brush to

clean thoroughly.

• It is highly recommended to apply a small

amount of oil (provided) to the blades before

each use.

• Wipe the outside with a damp cloth and dry

thoroughly before use or storage.

STORAGE

When not in use, allow clipper to cool and

store in a safe, dry location and out of the

reach of children. Never pull, twist or wrap

the cord around the clipper.

BATTERY DISPOSAL

This appliance contains Nickel Metal Hydride

batteries. To protect the environment this

appliance and its batteries must be disposed

of safely. At the end of its life, please take

this appliance to a recycling center, where

the internal rechargeable battery should

be removed by a professional and recycled

separately. For more information about the

recycling of electrical and battery operated

appliances please contact your local council

office or your household waste disposal ser-

vice. For specific enquiries regarding the re-

placement of batteries in this product please

contact our Conair Customer Care Line.

ONTAINS NICKEL METAL

YDRIDE BATTERIES. MUST BE

OLLECTED, RECYCLED OR

ISPOSED OF PROPERLY. DO

OT DISPOSE OF IN

HE MUNICIPAL WASTE.

Removing the Battery

Screw

Battery

MODEL HC900R

Stainless

Steel Blades

Cord/Cordless Clipper

Ergonomic Design

1Barber Comb

2Scissors

3Neck Brush

4Oil

5Storage pouch

62 Adjustable Comb Guides

LIMITED FIVE YEAR WARRANTY

Conair will repair or replace (at our option) your

unit free of charge for 60 months from the date of

purchase if the appliance is defective in workman-

ship or materials.

To obtain service under this warranty, return the

defective product to the service center listed below,

together with your purchase receipt and $5.00 for

postage and handling. California residents need

only provide proof of purchase and should call

1-800-366-0937 for shipping instructions. In the

absence of a purchase receipt, the warranty period

shall be 60 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR

LIABILITIES, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTY OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE,

SHALL BE LIMITED IN DURATION TO THE 60

MONTH DURATION OF THIS WRITTEN, LIMITED

WARRANTY. Some states do not allow limitations

on how long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR

ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES FOR BREACH OF THIS OR ANY

OTHER WARRANTY, EXPRESS OR IMPLIED,

WHATSOEVER. Some states do not allow the exclu-

sion or limitation of special, incidental, or conse-

quential damages, so the above limitation may not

apply to you.

This warranty gives you specific legal rights, and you

may also have other rights, which vary from state

to state.

Please register this product at

www.conair.com/registration

Service Center

Conair Corporation

Service Department

7475 North Glen Harbor Blvd.

Glendale, AZ 85307

11PG121622

IB-10691

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	HC900RN

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair HC900RN stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair MiniPRO CS80N Manual

1 Oktober 2024

Conair MASK2 Manual

1 Oktober 2024

Conair skn SFB11GK Manual

1 Oktober 2024

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair InfinitiPRO 998 Manual

3 September 2024

Conair CD117NN Manual

2 September 2024

Conair LLT2 Manual

2 September 2024

Conair CLS1X Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron Overbridge Manual

26 November 2024

Elektron Sidstation Manual

26 November 2024

SKROSS World Adapter Pro+ Manual

26 November 2024

SKROSS PRO – World & USB Manual

26 November 2024

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024