Conair HS41X Manual

Conair Ikke kategoriseret HS41X

Læs nedenfor 📖 manual på dansk for Conair HS41X (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

IONIC

GENERATOR

WITH CORD

REEL

20 CERAMIC FLOCKED

ROLLERS

INSTRUCTION &

STYLING GUIDE

MODEL HS41X

Due to continued product enhancements, product image may

differ slightly from actual product purchased.

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical appliances, especially

when children are present, basic safety pre-

cautions should always be followed, includ-

ing the following:

READ ALL INSTRUCTIONS

BEFORE USING

KEEP AWAY FROM WATER

DANGER – To reduce the risk of

electrocution:

1. Always unplug this appliance

immediately after using.

2. Do not use while bathing or in the

shower.

3. Do not place or store appliance where it

can fall or be pulled into a tub or sink.

4. Do not place in or drop into water or

other liquids.

5. Do not reach for an appliance that has

fallen into water. Unplug immediately.

WARNING – To reduce the risk

of burns, electrocution, fire, or injury to

persons:

1. An appliance should never be left

unattended when plugged in.

2. Do not pull, twist or wrap line cord

around appliance.

3. Close supervision is necessary when this

appliance is used by, on, or near children

or individuals with certain disabilities.

4. Use this appliance only for its intended use

as described in the manual. Do not use

attachments not recommended by Conair.

5. Never operate this appliance if it

has a damaged cord or plug, if it is

not working properly, if it has been

dropped or damaged or dropped

into water. Return the appliance to

an authorized Conair Service

Center for examination and repair.

6. Keep the cord away from heated

surfaces.

7. Never block the air openings of the appli-

ance or place it on a soft surface, such

as a bed or couch, where the air open-

ings may be blocked. Keep the air open-

ings free of lint, hair, and the like.

8. Never use while sleeping.

9. Never drop or insert any object into any

opening or hose.

10. Do not use outdoors or operate where

aerosol (spray) products are being used

or where oxygen is being administered.

11. Do not use an extension cord with this

appliance.

12. Center of rollers will be hot – hold rollers

by ends to roll hair.

13. Use hairsetter on a level surface.

14. Do not touch the metal radiator strips

that hold the rollers – they are hot.

15. This appliance is not a toy. Keep away

from children.

SAVE THESE

INSTRUCTIONS

OPERATING

INSTRUCTIONS

HOW TO OPERATE YOUR HAIRSETTER

1. Your hairsetter is uniquely designed with

a retractable cord for easy storage. Place

hairsetter on a firm, flat surface. Gently pull

the cord from the base of the hairsetter. Open

the lid and take out the clip bracket and all

clips, then close the lid. With the lid closed,

plug cord into standard electrical outlet. This

appliance has a polarized plug (one blade is

wider than the other). As a safety feature, this

plug will fit into a polarized outlet only one

way. If the plug does not fit fully into the outlet,

reverse the plug. If it still does not fit, contact a

qualified electrician. Do not attempt to defeat

this safety feature.

2. Once plugged in, turn the unit on by slid-

ing the switch to the ON pos ition. The red

light will go on, the rollers will heat up

quickly and the ionic energy will be auto-

matically activated (please refer to HOW TO

CURL YOUR HAIR for further instruction).

Use the control dial to choose the desired

temperature for your hair type. 12 variable heat

settings give you greater versatility.

3. Allow rollers to heat with lid closed, as this

will provide the fastest, most efficient heat-up.

Once the rollers’ indicator light turns white,

they have reached your desired temperature

and you can begin setting your hair. For tighter

curls, allow rollers to heat longer at a higher

temperature. Never leave your hairsetter on and

unattended. Always unplug the hairsetter when

not in use. Allow the hairsetter to cool down

after use, and store in a safe place.

4. Hair should be clean and dry or slightly damp

– never wet – when setting.

5. This appliance has a 60-minute auto OFF

function. If the appliance is left on it will auto-

matically shut off around 60 minutes.

NOTE: Red ON indicator light will remain illu-

minated. To restart the hairsetter for operation,

turn the switch off and then back on again.

USER MAINTENANCE

Your hairsetter is designed for household use

and is virtually maintenance free. This product

represents the highest standards of workman-

ship and engineering research.

If cleaning becomes necessary, disconnect the

appliance from the power source. Allow the

hairsetter to cool. Clean the unit and the metal

radiator strip with a cloth. (Occasionally you may

want to clean your rollers. Use a damp cloth and

mild detergent or soap.) If any abnormal condition

occurs, unplug the hairsetter, allow it to cool, and

return it to an authorized service representative

for repair.

STORAGE

Allow hairsetter to cool. Pull gently on the plug and

the retractable cord will coil inside the hairsetter

(Fig. 1). Handle cord carefully

to extend its life; avoid jerking

or straining plug connections.

Place hairsetter out of reach of

children, in a safe, dry location. Fig. 1

HOW TO CURL YOUR HAIR

1. Place ends of hair

on roller and wind

toward the scalp. Roll

up hair firmly, and

secure clip, crossing

over roller.

2. The firmness of the

curl is regulated by the temperature setting

chosen on the control dial, the diameter of

the roller, and the length of time the roller is

left in your hair.

3. For tight, firm curls, use smaller rollers and

a higher temperature, and leave roller in hair

for at least ten minutes before removing.

For soft, wavy curls, use larger rollers and a

lower temperature and remove rollers after

a shorter period of time. Our 12 variable

heat settings give you longer-lasting styles.

4. Removing roller: Hold roller in one hand while

removing clip with the other. Gently drop roller

(DO NOT PULL) and let curl bounce back after

roller has been completely removed. Let

cool for one minute for a firmly set curl, and

then style your hair into a look that lasts

for hours.

IMPORTANT: After using the hairsetter several

times, you will find the best roller selection and

the best timing for the texture of your hair and for

the result you desire.

DUAL IONIC PORT SYSTEM GENERATES

NEGATIVE IONS THAT CAN:

• neutralize positive charge on flyaway,

frizzy hair

• eliminate static electricity

• contribute to shine

NOTE: The unit may produce a clicking sound

at times. This is normal for a high-output

ion generator.

Ceramic Technology

Helps eliminate frizz and damaging hot spots.

Gently styles hair to a healthy-looking, silky,

shiny finish.

Aluminum

heating core

Ceramic

layer

Soft

flocking

layer

SMALL ROLLERS Use on short hair or for

tight curls.

MEDIUM ROLLERS Use on short hair to create

fullness and tight curl. Tight curls can be used at

the nape of the neck and to frame your face.

LARGE ROLLERS Use on medium to long hair to

create a looser curl that’s bouncy and full of body.

TO ORDER EXTRA ROLLERS & CLIPS

Rollers come packed three of the same size to a

carton. Rollers are sold by the carton only.

Model Description Price

RP41S 3 Small Rollers $4.75

RP41M 3 Medium Rollers $5.25

RP41L 3 Large Rollers $5.75

SMC10-B 3 Replacement Clips $5.99

Please add postage and handling to all orders.

Postage and handling is as follows: Orders

up to $5.00: add $.50 to order. Orders from

$5.01 to $10.00: add $1.00 to order. Orders

of $10.01 and over: add $1.50 to order.

MAIL ORDER TO:

Conair Corporation

150 Milford Road, East Windsor, NJ 08520

Service Department

7475 North Glen Harbor Blvd.

Glendale, AZ 85307

Include return name and address and model

number of replacement rollers. Please make

check payable to Conair Corporation.

WARNING:

IF YOU THINK THE

POWER IS OFF WHEN

THE SWITCH IS OFF,

YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water

are a dangerous combination. But did you

know that an electrical appliance is still

electrically live even if the switch is off? If

the plug is in, the power is on. So when you

are not using your appliances, keep them

unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED THREE-YEAR WARRANTY

(U.S. AND CANADA ONLY)

Conair will repair or replace (at our option) your

unit free of charge for 36 months from the

date of purchase if the appliance is defective in

workmanship or materials.

To obtain service under this warranty, return

the defective product to the service center

listed on back, together with your purchase

receipt and $5.00 for postage and handling.

California residents need only provide proof

of purchase and should call 1-800-3-Conair

for shipping instructions. In the absence of a

purchase receipt, the warranty period shall be

36 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS,

OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, SHALL BE LIMITED

IN DURATION TO THE 36-MONTH DURATION

OF THIS WRITTEN, LIMITED WARRANTY.

Some states do not allow limitations on how

long an implied warranty lasts, so the above

limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE

FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF

THIS OR ANY OTHER WARRANTY, EXPRESS

OR IMPLIED, WHATSOEVER. Some states do

not allow the exclusion or limitation of special,

incidental, or consequential damages, so the

above limitation may not apply to you. This

warranty gives you specific legal rights, and

you may also have other rights, which vary

from state to state.

Please register this product at

www.conair.com/registration

Service Center

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

150 Milford Road, East Windsor, NJ 08520

7475 N. Glen Harbor Blvd., Glendale, AZ 85307

IB-16434

19PH063021

Produkt Specifikationer

Mærke:	Conair
Kategori:	Ikke kategoriseret
Model:	HS41X

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair HS41X stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Conair Manualer

Conair MiniPRO CS80N Manual

1 Oktober 2024

Conair MASK2 Manual

1 Oktober 2024

Conair skn SFB11GK Manual

1 Oktober 2024

Conair Man GMTL6000 Manual

6 September 2024

Conair LNT1 Manual

6 September 2024

Conair Man GMT189R Manual

6 September 2024

Conair InfinitiPRO 998 Manual

3 September 2024

Conair CD117NN Manual

2 September 2024

Conair LLT2 Manual

2 September 2024

Conair CLS1X Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron Overbridge Manual

26 November 2024

Elektron Sidstation Manual

26 November 2024

SKROSS World Adapter Pro+ Manual

26 November 2024

SKROSS PRO – World & USB Manual

26 November 2024

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024