Conair WW712XF Manual

Conair Vægten WW712XF

Læs nedenfor 📖 manual på dansk for Conair WW712XF (2 sider) i kategorien Vægten. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
©2019 Conair Corporation. Glendale, AZ 85307. Made in China.
©2019 WW International Inc. All rights reserved. WW is the registered trademark of
WW International Inc. and used under license.
Service Center
Conair Corporation
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
1-800-326-6247
www.conair.com
19AD064397 IB-16541
LIMITED TEN YEAR WARRANTY (U.S. & CANADA ONLY)
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed below that is nearest you, together with your sales slip. California
residents need only provide proof of purchase and should call 1-800-3-CONAIR for
shipping instructions. In the absence of a receipt, the warranty period shall be 120
months from the date of manufacture..
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow lim-
itations on how
long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Please register this product at: www.conair.com/registration
Spanish translation available online at www.conairscales.com
Customizing Your Body Analysis Monitor
This scale can be customized for up to 4 users. While the customization process is
not diffi cult, it may be easiest to read all the instructions rst to familiarize yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: USER, SET, Up and Down arrows
1. To set your user data
Gently push on the scale with your foot, and until you see “000”
flashing on the display, take your foot off the scale immediately;
and then “0.0” appears.
2. Setting the user number
Press the SET button. “P-01” will appear and fl ash. Use the
Up/Down arrow to select a user number (P-01 to P-04).
Press SET to confi rm.
3. Setting the gender
The gender icon fl ashes. Press the Up or Down arrows
to choose between male and female gender. Press SET
to confi rm.
4. Setting the height
Next, the inch or cm symbol lights up (if switch is set to LB,
default is height in inches; if switch is set to KG, default is
height in cm). Press the Up or Down arrows to adjust the
height. Pressing and holding either the Up or the Down arrow
will advance numbers quickly. Press SET to confi rm the height.
5. Setting the age
AGE appears and the default age, 25, fl ashes. Press the Up or
Down arrows to adjust the age and press SET to confi rm.
6. Displaying and storing data
Once age is set, data storage is complete. Scale will display
your stored data (user number, gender, height, and age) for
a few seconds.
7. The scale is ready for use.
“0.0” will show on the display. You may press the SET button to
revise the user data, or set up data for different user, or you can
now use the scale to take your body analysis readings. Or, you
can let the display turn off automatically after a few seconds and
use it later. Or, you can let the display turn off automatically after
several seconds and use it later.
Body Analysis
1. Operate the scale on a secure, at fl oor. Gently press the
scale with one of your feet until you see “000” fl ashing on the
display. Take your foot off the scale immediately, and wait until
“0.0” appears.
2. Press the USER button to select your user number and
recall the stored data. Then “0.0” will appear.
3. Step on the scale barefoot with your feet aligned on the
electrodes (metal strips) on both sides of the platform.
NOTE: You must be barefoot in order for the scale to read
the body analysis measurements.
4. Your current weight will be displayed for a few seconds.
5. Next, the display will show your body fat and body
water percentage.
6. Then, the display shows your bone mass and BMI.
7. Next, the display shows your muscle mass value.
8. The LCD will display your current weight, body fat, body water, bone mass, BMI
and muscle mass again and then turn off automatically.
NOTE: If an err occurs, or weight is out of max capacity, the scale will not
function properly and “Err” appears.
Scale will show “Err” if there is improper foot contact in the body
analysis mode, for instance, when you stand on the scale with
socks or shoes on. Hard or dry skin can prevent you making
proper contact with electrodes on the surface of the scale.
Try applying a small amount of moisturizer to your feet before using the
scale.
Supplier’s Declaration of Conformity
Brand: WW by CONAIR
Model No.: WW712XF
Description: Digital Body Analysis Scale
Responsible Party: Conair Corporation, 1 Cummings Point Road,
Stamford CT 06902
(203) 351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Date of Issue: August 12, 2019
FCC Markings:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifi cations not expressly approved by Conair
Corporation, the manufacturer of this product and the party responsible for
compliance, could void the user’s authority to operate the equipment.
This scale is not a toy.
Instructions for use
To get the greatest benefit from your purchase,
please read this entire brochure before using your scale.
WW712XF
digital
body analysis scale
ww712xf_19ad064397_ib_final.indd 1-6
ww712xf_19ad064397_ib_final.indd 1-6
ww712xf_19ad064397_ib_final.indd 1-6
ww712xf_19ad064397_ib_final.indd 1-6
ww712xf_19ad064397_ib_final.indd 1-6 9/16/19 1:55 PM
9/16/19 1:55 PM
9/16/19 1:55 PM
9/16/19 1:55 PM
9/16/19 1:55 PM


Produkt Specifikationer

Mærke: Conair
Kategori: Vægten
Model: WW712XF

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair WW712XF stil et spørgsmål nedenfor, og andre brugere vil svare dig




Vægten Conair Manualer

Conair

Conair Thinner TH280 Manual

6 September 2024
Conair

Conair Thinner TH106 Manual

6 September 2024
Conair

Conair Thinner TH310Z Manual

6 September 2024
Conair

Conair WW204WGBZ Manual

6 September 2024
Conair

Conair Thinner TH322 Manual

6 September 2024
Conair

Conair WW712XF Manual

6 September 2024
Conair

Conair Care CN600 Manual

6 September 2024
Conair

Conair WW31X Manual

21 August 2024

Vægten Manualer

Nyeste Vægten Manualer