Conair WW714ZF Manual

Conair Ikke kategoriseret WW714ZF

Læs nedenfor 📖 manual på dansk for Conair WW714ZF (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Customizing Your Body Analysis Monitor
This scale can be customized for up to 4 users. While the customization process is
not difficult, it may be easiest to read all the instructions first to familiarize yourself
with them. Then keep the instruction manual handy as you go through the process
step by step.
Buttons: SET, Up and Down arrows
1. To set your user data
Gently push on the scale with your foot. "000" will appear, then "0.0" will display.
2. Setting the user number
Press the SET button. “P-01” will appear and flash. Use the Up or Down
arrow to select a user number (P-01 to P-04).
Press SET to confirm.
3. Setting the height
Next, the inch or cm symbol will light up (if switch is set to lb,
default is height in inches; if switch is set to kg, default is
height in cm). Press the Up or Down arrow to adjust the height.
Pressing and holding either the Up or the Down arrow will
advance numbers quickly. Press SET to confirm the height.
4. Setting the age
The default age, 25, will appear and flash. Press the Up or Down arrow to
adjust the age and press SET to confirm.
5. Setting the gender
The gender icon will flash. Press the Up or Down arrow to choose male or
female gender. Press SET to confirm.
6. Displaying and storing data
Once gender is set, data storage is complete. Scale will display your
stored data (user number, height, age and gender) for a few seconds.
7. The scale is ready for use.
“0.0” will show on the display. You may press the SET button to revise the user data
or set up data for different user, or you can now use the scale to take your body
analysis readings. Or, you can let the display turn off automatically after a few seconds
and use the scale later.
Body Analysis
1. Operate the scale on a secure, flat floor. Gently press the
scale with your foot until you see “000” flashing on the display.
Take your foot off the scale immediately, and wait until “0.0”
appears.
2. Press the Up or Down arrow to select your user number and recall the stored
data. Then “0.0” will appear again.
3. Step on the scale barefoot with your feet aligned on the electrodes (metal
strips) on both sides of the platform.
NOTE: You must be barefoot in order for the scale to read your body
analysis measurements.
4. Your current weight will be displayed for a few seconds.
5. Next, the display will show a running 0 to show it is entering
the body analysis mode.
6. Then the display will show your body fat.
7. Then it will show your body water percentage.
8. Next, the display will show muscle mass.
9. Then it will show your bone mass.
10. And finally, the display will show your BMI value.
11. The LCD will display your current weight, body fat, body
water, muscle mass, bone mass and BMI again, and then turn off
automatically.
NOTE: If an error occurs, or weight is over maximum capacity, the
scale will not function properly and “Err” will appear.
Scale will show “Err” if there is improper foot contact in the body
analysis mode, for instance, if you stand on the scale with socks or shoes
on. Hard or dry skin can also prevent you from making proper contact
with electrodes on the surface of the scale. Try applying a small a ount of
moisturizer to your feet before using the scale.
m
Manual App Tracking
Your scale will work with the free WW Scales by Conair® app to
give you an easy-to-use way of tracking your measurements. To
download the app, go to the Apple® App Store or Google Play
app store and type WW scales by Conair into the search box.
Once you have downloaded the app to your device, it will walk
you through the registration process. Note that if you are a WW
member and would like to have your weight data sync automatically to the WW
member app, you will need to register with the same user name and password
you are currently using for the WW member app. Once you are registered, you can
manually add data into the app tracker by tapping the “+” sign on the dashboard:
you can choose to add data every time you weigh yourself, or just add data on
certain days. You can choose to add just one measurement (for instance, weight)
for tracking, or you can add any or all of the body analysis measurements, such
as body fat, body water, bone mass, muscle mass and BMI. The app gives you an
easy, fun way to keep track of the progress you are making.
Supplier’s Declaration of Conformity
Brand: WW by CONAIR
Model No.: WW714ZF
Description: Digital Body Analysis Scale
Responsible Party: Conair LLC, 1 Cummings Point Road,
Stamford CT 06902
(203) 351-9000
Standards: FCC Part 15 Subpart B, ANSI C63.4-2014
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Date of Issue: June 18, 2021
FCC Markings:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a cir cuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by Conair LLC, the
manufacturer of this product and the party responsible for compliance, could void
the user’s authority to operate the equipment.
This scale is not a toy.
LIMITED TEN-YEAR WARRANTY (U.S. & CANADA ONLY)
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed, together with your sales receipt. California residents need only
provide proof of purchase and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a receipt, the warranty period shall be 120 months
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
DURATION OF THIS WRITTEN LIMITED WARRANTY. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitations may not
apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Please register this product at www.conair.com/registration
Spanish translation available online at www.conairscales.com
Service Center
Conair LLC
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2021 Conair LLC, Glendale, AZ 85307. Made in China.
©2021 WW International Inc. All rights reserved. WW is the registered trademark of
WW International Inc. and used under license. IB-17355
21AD079703
B O D Y A N A LY S I S
S C A L E
five body
analysis results
manually track
on free app
2.6" backlit
display
user
memory
Instructions for use.
To get the greatest benefit from your purchase,
please read this entire brochure before using your scale.
WW714ZF

Produkt Specifikationer

Mærke: Conair
Kategori: Ikke kategoriseret
Model: WW714ZF

Har du brug for hjælp?

Hvis du har brug for hjælp til Conair WW714ZF stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Conair Manualer

Conair

Conair MiniPRO CS80N Manual

1 Oktober 2024
Conair

Conair MASK2 Manual

1 Oktober 2024
Conair

Conair skn SFB11GK Manual

1 Oktober 2024
Conair

Conair Man GMTL6000 Manual

6 September 2024
Conair

Conair LNT1 Manual

6 September 2024
Conair

Conair Man GMT189R Manual

6 September 2024
Conair

Conair InfinitiPRO 998 Manual

3 September 2024
Conair

Conair CD117NN Manual

2 September 2024
Conair

Conair LLT2 Manual

2 September 2024
Conair

Conair CLS1X Manual

2 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SKROSS

SKROSS World Adapter Pro+ Manual

26 November 2024
SKROSS

SKROSS PRO – World & USB Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024