Concept2 PM3 Manual


Læs nedenfor 📖 manual på dansk for Concept2 PM3 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
1
allows you to select
meters, pace, watts or calories.
Push this button any time while
setting up a workout, during a
workout or viewing results.
allows you to
choose another display. Push
this button any time during a
workout. Each time you press
[CHANGE DISPLAY] a new
display is shown. See illustrations.
Five Graphic Displays
Turning the PM On/Off:
The PM will turn on when you:
• takeastroke
• press[MENU/BACK]
• insertaLogCardorUSBcable
• insertbatteriesorbatterypack
The PM turns off after four
minutes of inactivity on a workout
screen, or after one minute on the
Main Menu screen.
Setting Date and Time:
The first time you turn on the
PM, you are prompted to set the
date and time. This ensures your
results are associated with the
proper date.
• Ifyoueverneedtore-setDate/
Time, from press Main Menu
More Options > Utilities > Set
Date and Time.Usebuttons
as indicated to increase or
decrease time.
General Operation:
• ThePMautomaticallydisplaysyourworkoutdataassoonasyoustartyourworkout.
Itisnotnecessarytopressanybuttonsifyoudonotwantto.
• Press[MENU/BACK] to go back to the previous display.
• Press[ ]or[CHANGE UNITS CHANGE DISPLAY] at any time during and after your
workout to view different units and a different presentation of your workout data.
• Weencourageyoutoexplorethemenuandexperimentwiththebuttons!
Using a Heart Rate Monitor:
WARNING!Heartratemonitoringsystemsmaybeinnaccurate.Over-exercising
mayresultinseriousinjuryordeath.Ifyoufeelfaint,stopexercisingimmediately.
The PM displays your heart rate if one of the following heart rate systems is in use:
PM3
The PM3 will receive heart rate
transmission from a Polar™ chest belt
IFtheoptionalConcept2HeartRate
Receiver(availablefromConcept2)isin
use and plugged into the PM3.
Not available.
PM4
The PM4 will receive heart rate
transmissionfromaPolar™chestbeltIF
theoptionalConcept2HeartRateReceiver
(availablefromConcept2)isinuseand
plugged into the PM4.
The PM4 will receive heart rate
transmission directly from a Suunto™,
Garmin®orANT+HR chest belt.
See for set up.More Options
Note:HeartRate(HR)willbedisplayedonlyifHRInterfaceisinuse.
GETTING STARTED
ALL DATA FORCE CURVE PACEBOAT/PACE SKIER BAR CHART LARGE PRINT
OVERVIEW OF THE PERFORMANCE MONITOR(PM)
For Model D, Model E and Dynamic Indoor Rowers, and the SkiErg.
For more detailed information about using the Performance Monitor, please visit concept2.com/pm.
LogCard:whenaLogCardispresent,workoutdatawillbestored
ontheLogCard.Afteryourworkout,returntotheMain Menu before
removingtheLogCardtoensureproperstorageofdata.(IfnoLogCard
present, data is stored in Memory.)Usethe“Concept2LogCardUtility”to
backupyourLogCarddatatoyourPC.(USBcableprovided)
Note: ALogCardisprovidedwitheveryPerformanceMonitor(PM).Each
card can be shared by up to five users. Additional cards can be purchased
fromConcept2.
These buttons allow you to:
• makemenuselections
• incrementnumbersforsettingworkoutsanddate/time
• viewalternatedisplaysduringuse
turns on the monitor and displays or Main Menu
the previous menu. After a workout, press this button to end
the workout and return to the .Main Menu


Produkt Specifikationer

Mærke: Concept2
Kategori: Ikke kategoriseret
Model: PM3

Har du brug for hjælp?

Hvis du har brug for hjælp til Concept2 PM3 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Concept2 Manualer

Concept2

Concept2 SkiErg 1 Manual

5 September 2024
Concept2

Concept2 PM3 Manual

4 September 2024
Concept2

Concept2 PM4 Manual

15 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer