Cotech 36-8196 Manual


Læs nedenfor 📖 manual på dansk for Cotech 36-8196 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
UNITED KING DOM
www.clasohlson.co.uk
1 2 3
5
4
Ver. 20220715
RGB Floor Lamp
Art.no 36-8196 Model LUM-FLD20X110W08BK-01B
Read theentire instruction manual before use and
save it for future reference. We apologise for any
text and picture errors and any changes of technical
data. If you have any questions concerning technical
problems please contact our Customer Services.
Safety
Warning
Neither theproduct nor its mains adapter may
be dismantled or modied in any way.
Never use theproduct or themains adapter
if it is in any way damaged or malfunctioning.
Unplug theproduct immediately if it is damaged.
Do not use theproduct in explosive
atmospheres or in thepresence of flammable
liquids or gases.
The product must only be connected to
theincluded mains adapter.
Never connect several or other types of devices
to themains adapter.
The product must not be installed on awet or
electrically conductive surface.
Make sure that thecables are not damaged
whilst theproduct is being installed.
Always unplug themains adapter from thewall
socket when theproduct is not in use.
Do not carry theproduct using themains lead
and do not use it for other unsuitable purposes.
Never let children play with theproduct.
The product may be used by persons with
reduced physical, sensory or mental capabilities
or persons with alack of experience or
knowledge which could jeopardise their safety,
provided they have been instructed in thesafe
operation of theproduct and understand
thehazards involved.
Potentially hazardous optical radiation.
Never look directly at thelight source.
The product is not suitable for illuminating
aroom.
The product is intended for indoor use only.
Class II mains adapter.
Class III strip light
1. Screw theLED light fitting onto thebase (only
finger-tight).
2. Connect theLED light fitting to thecontrol box.
Note: Make sure that theconnectors are joined
and aligned correctly, with thearrows pointing
towards each other. Otherwise thelight will not
work.
3. Connect theconnecting cable to thecontrol box.
4. Plug themains adapter into asuitable electrical
outlet.
5. Note: Pull out theplastic film tab protruding from
thebattery compartment of theremote control.
Assembly
Functions
Note: Make sure there are no obstacles between
the IR receiver on the control box and the remote
control.
Important
The LED light sources cannot be replaced.
When theLEDs have reached theend of
their service life, theentire product must be
discarded.
This product is intended only for private use.
Auto
Flash
Jump
Meters
IC Set
CS
C3
C7
C16
W/WW
Care and maintenance
Unplug themains lead from thewall socket
before cleaning.
The product should be cleaned using adry cloth
or vacuum cleaner.
Responsible disposal
This symbol indicates that theproduct
should not be disposed of with general
household waste. This applies throughout
theentire EU. In order to prevent
possible damage to human health and
theenvironment caused by improper waste disposal,
at theend of its service life theproduct should be
taken to anappropriate recycling facility so that
thematerial can be disposed of in aresponsible
manner. Take theused product to your local waste
management facility or theplace of purchase.
They will ensure that theproduct is disposed of in
anenvironmentally sound manner.
Specifications
Mains adapter
Power supply 230 V AC, 50 Hz
Output 12 V, 1 A DC
Strip light
Dimensions Ø 200 mm×H 1100 mm
Light source 30×LED
Rated voltage 12 V DC
Rated power 6.6 W
Remote control
Range Max 5 m
Battery 1×CR2025 (included)
Switch on/off
Select warm white or cool white
Colour selector buttons
1 colour at a time
7 colours
3 colours (R, G, B)
16 colours
Colour selection can be combined with other functions.
Number of lit LEDs / Brightness
Press [ IC Set ] and use [ ] and [ ] to gradually
turn off or turn on three LED lights at a time.
Increase or decrease the brightness
Fluctuating functions
Switches between all colours and programmes
The LED lights move from one end to theother
Slow flashing
Intensiveashing
A group of LED lights moves from one end to
theother where they form arow and move on
Specific direction light effect selection
The LED lights move from the middle
out towards the ends.
The LED lights move from the ends in
towards the middle.
21 LED lights move from one end to
the other
12 LED lights move from one end to
the other
The LED strip light lights up one light
at a time from one end to the other,
extinguishes, and then starts again.
21 LED lights form a group and then
move together in a row along the
strip light.


Produkt Specifikationer

Mærke: Cotech
Kategori: Ikke kategoriseret
Model: 36-8196

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech 36-8196 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Cotech Manualer

Cotech

Cotech HT7715 Manual

18 September 2024
Cotech

Cotech K-CPL-LS4W-IR-S3 Manual

16 September 2024
Cotech

Cotech J1x-JF2-210/20 Manual

14 September 2024
Cotech

Cotech TD9511-3 Manual

12 September 2024
Cotech

Cotech S1J-AJ8-10 Manual

31 August 2024
Cotech

Cotech J5218D Manual

27 August 2024
Cotech

Cotech 50053 Manual

27 August 2024
Cotech

Cotech 51097X23 Manual

27 August 2024
Cotech

Cotech 36-6286 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024