Cotech 51058x2 Manual

Cotech Skifte 51058x2

Læs nedenfor 📖 manual på dansk for Cotech 51058x2 (6 sider) i kategorien Skifte. Denne guide var nyttig for 28 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/6
UNITED KINGDOM • CUSTOMER SERVICE
tel 020 8247 9300 customerservice@clasohlson.co.uk www.clasohlson.co.uk e-mail internet
postal Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER
Ver. 20190923
Dimmer Switch Receiver
Art.no 18-1254 Model 51058GBx2
36-6009 51058x2
Please read theentire instruction manual before using theproduct and then save
it for future reference. Wereserve theright for any errors in text or images and
any necessary changes made to technicaldata. Intheevent of technical pro-
blems or other queries, please contact our Customer Services.
Safety
• Make sure that theelectrical socket that theproduct is plugged into is
easily accessible in case it and theconnected product need to be quickly
disconnected from themains electricity.
• Do not connect products of this type to each other.
• Do not cover theproduct.
Operating instructions
Installation
5. Connect alight to thereceiver and
check that thelight is switchedon.
Tip: Thelight can also be switched on/
off manually by pressing thebutton on
thereceiver.
1. Plug thereceiver into
anelectrical outlet.
2. Hold in thebutton on thefront of
thereceiver for at least 3seconds and
then releaseit.
3. TheLED button will start flashing slowly.
Thereceiver is now ready to be paired
with aremote control.
4. Press one of theon-buttons on
theremote control once (if it has more
than one on-button). TheLED on
thereceiver will shine steadily when
theremote control has been paired.
Upto 6 remote controls can be paired
with thereceiver.
Dimming the light
Thelight can be dimmed using thepaired remote control. Thisis how to doit:
Press theon-button on theremote control twice in quick succession to cause
thelight to alternately increase and decrease. Presstheon-button once more
when thedesired light level has been reached.
Switching the light on/off
Switch thelight on/off using theon and off buttons. Thelight comes on at
thelatest light level setting when theon-button is pressed. Ifyou wish to set
anew light level once thelight is switched on, press theon-button on theremote
controlagain. Presstheon-button once more when thedesired light level has
been reached.
Deleting a paired remote control
Up to 6 remote controls can be stored in thememory of thereceiver. Ifyou
wish to pair aremote control when six remote controls are already paired with
thereceiver, you must first delete one of theexisting remote controls:
1. Hold in thebutton on thefront of thereceiver you wish to delete for 3
seconds and then releaseit.
2. TheLED button will start flashing slowly. Thereceiver is now ready to delete
theremote control.
3. Press in theoff-button on theremote control (make sure to choose
thecorrect off-button if theremote control can connect to multiple receivers).
Theremote control will now be deleted from thereceiver.
Deleting all paired remote controls
Care and maintenance
• Thereceiver should be unplugged from thewall socket if it is not to be used
for alongtime.
• Thereceiver should be cleaned by wiping it with adrycloth.
Troubleshooting guide
Thereceiver is
not working,
theLED is
notlit.
• Has thereceiver been paired with aremote control as
describedabove? Trypairing themagain.
• Check that thelight is properly plugged into thereceiver
and that it is switched on and not faulty.
• Try plugging thelight into another electrical outlet to
make sure that itworks.
• Is there electricity in theoutlet thereceiver is
pluggedinto?
Responsible disposal
1. Hold in thebutton on thefront of
thereceiver for 6 seconds until
theLED button starts flashing
quickly.
2. When theLED stops flashing, all
theremote controls which were
paired with thereceiver will have
been deleted.
This symbol indicates that this product should not be
disposed of with general householdwaste. Thisapplies
throughout theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by incorrect waste
disposal, theproduct must be handed in for recycling so that
thematerial can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your local collection
facility or contact theplace of purchase. Theywill ensure that
theproduct is disposed of in anenvironmentally sound manner.
Specifications
18-1254
Supply voltage 220–240 V, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Max load
Incandescent and halogen bulbs (230V) Max 200W
Dimmable LED bulbs (230V) Max 3–24W
36-6009
Supply voltage 230V, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Max load
Incandescent and halogenbulbs Max 200W
Dimmable 230V LEDbulbs Max 3–24W

Produkt Specifikationer

Mærke: Cotech
Kategori: Skifte
Model: 51058x2

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech 51058x2 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Skifte Cotech Manualer

Cotech

Cotech TS-MD35 Manual

24 Juli 2024
Cotech

Cotech EF700ET Manual

22 Juli 2024
Cotech

Cotech EMT446/MD Manual

20 Juli 2024
Cotech

Cotech 51050X2 Manual

5 Juni 2023
Cotech

Cotech 51058x2 Manual

28 Maj 2023

Skifte Manualer

Nyeste Skifte Manualer

Berker

Berker 80161865 Manual

16 December 2024
Berker

Berker 80262280 Manual

16 December 2024
Berker

Berker 80141170 Manual

16 December 2024
Berker

Berker 80162785 Manual

16 December 2024
Berker

Berker 80164773 Manual

16 December 2024
Berker

Berker 80162865 Manual

16 December 2024
Berker

Berker 80162780 Manual

16 December 2024
Berker

Berker 80142170 Manual

16 December 2024
Berker

Berker 80164776 Manual

16 December 2024
Berker

Berker 80262170 Manual

16 December 2024