Cotech 51050X2 Manual

Cotech Bryter 51050X2

Læs nedenfor 📖 manual på dansk for Cotech 51050X2 (5 sider) i kategorien Bryter. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/5
GREAT BRITAIN • CUSTOMER SERVICE tel. 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk
Ver. 20151021
Flush Mount Dimmer
Switch Receiver
Art.no 36-6031 Model 51050X2
Please read theentire instruction manual before using theproduct
and then save it for future reference. Wereserve theright for
any errors in text or images and any necessary changes made
to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services.
Note:
Electrical installations should only be carried out by aqualified
electrician.
Installation
Pairing the receiver to a remote control
Wiring to a230V power supply Connecting alight
1. Hold in thebutton on
thefront of thereceiver for
at least 3 seconds and then
releaseit.
3. Single press one of theon-buttons on theremote control
(if it has more than one on-button). Thereceiver’s LED will
shine steadily once theremote control has been paired.
Upto 6 remote controls can be paired with thereceiver.
Dimming the light
Thelight can be dimmed using thepaired remote control.
Thisis how to doit:
Press theon-button on theremote control twice in quick
succession to cause thelight to alternately increase and
decrease. Single press theon-button once thedesired light
level has been reached.
Switching the light on/off
Switch thelight on/off using theon and off buttons. Thelight
comes on with thelatest light level setting when theon-button
is pressed. Ifyou wish to set anew light level once thelight is
switched on, press theon-button on theremote controlagain.
Single press theon-button once thedesired light level has
been reached.
Deleting a paired remote control
Up to 6 remote controls can be stored in thereceiver memory.
Ifyou wish to pair anadditional remote control when six
remote controls are already paired with thereceiver, you must
first delete one of theexisting remote controls:
1. Hold in thebutton on thefront of thereceiver you wish to
delete for 3 seconds and then releaseit.
2. TheLED button will startashing slowly. Thereceiver is
now ready to delete theremote control.
3. Press in theoff-button on theremote control (make sure
to choose thecorrect off-button if theremote control can
connect to multiple receivers). Theremote control will now
be deleted from thereceiver.
Deleting all paired remote controls
1. Hold in thebutton on thefront
of thereceiver for 6seconds
until theLED button starts
flashing quickly.
2. When theLED stops flashing,
all theremote controls which
were paired with thereceiver
will have been deleted.
2. TheLED button will start
flashing slowly. Thereceiver
is now ready to be paired
with aremote control.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
householdwaste. Thisapplies throughout
theentire EU. Inorder to prevent any harm to
theenvironment or health hazards caused by
incorrect waste disposal, theproduct must
be handed in for recycling so that thematerial
can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your
local collection facility or contact theplace of
purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Rated voltage 230V, 50 Hz
Frequency 433.92 MHz
Maxrange 25m
Max load
Incandescent and halogenbulbs Max 200W
Dimmable CFLbulbs Max 200W
Dimmable 230V LEDbulbs Max 3–24W


Produkt Specifikationer

Mærke: Cotech
Kategori: Bryter
Model: 51050X2

Har du brug for hjælp?

Hvis du har brug for hjælp til Cotech 51050X2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Bryter Cotech Manualer

Bryter Manualer

Nyeste Bryter Manualer