Craftbot Plus Manual
Craftbot
3D printer
Plus
Læs nedenfor 📖 manual på dansk for Craftbot Plus (2 sider) i kategorien 3D printer. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
QUICK START GUIDE
Thank you for purchasing a CraftUnique product and welcome to the world of 3D crafting!
You are just a few steps away from having your rst 3D object printed by your brand new CraftBot.
I. UNPACKING
Step #1
You’ve already found the Quick Start Guide. Excellent! Now remove the large sheet resting under the foam.
Under the sheet you will nd your CraftBot attachable accessories in a cardboard cradle resting in the cavity
of the CraftBot 3D printer.
Step #2
Remove this cradle from the box with care and place it in a safe out-of-the-way place.
Step #3
The printer is wrapped in a tight tting plastic protective cover. Open up the covering.
Firmly grasp the frame of the CraftBot and lift it out of the box without touching the fragile inner parts.
CraftBot weights 14 kg (almost 31 lbs) – seek assistance if needed!
Step #4
Place the printer on a stable and level surface with sucient space around.
II. ACCESSORY CHECK
It’s time to unpack additional parts.
Below you can see the contents of the
box. First of all, check the list to make
sure nothing is missing!
1. Filament guide tube holder
2. Filament guide tube
3. Filament spool holder
4. Filament spool
5. Hex wrenches (5x)
6. USB Flash storage
7. USB A-B cable and AC power cable
8. Filament monitoring system (FMS)*
1
4
7
2
5
8
3
6
1 2 3 4
PLUG&PLAY 3D PRINTER
WITH 5 YEARS WARRANTY
WWW.CRAFTBOT.COM • WWW.CRAFTBOTUSA.COM
Produkt Specifikationer
| Mærke: | Craftbot |
| Kategori: | 3D printer |
| Model: | Plus |
Har du brug for hjælp?
Hvis du har brug for hjælp til Craftbot Plus stil et spørgsmål nedenfor, og andre brugere vil svare dig
3D printer Craftbot Manualer
3 September 2024
1 September 2024
1 September 2024
3D printer Manualer
- 3D printer Kodak
- 3D printer Gembird
- 3D printer Exibel
- 3D printer Anker
- 3D printer Polaroid
- 3D printer Creality3D
- 3D printer Weller
- 3D printer Renkforce
- 3D printer Snapmaker
- 3D printer Bq
- 3D printer Flashforge
- 3D printer Monoprice
- 3D printer XYZprinting
- 3D printer MakerBot
- 3D printer Weistek
- 3D printer Leap Frog
- 3D printer Wasp
- 3D printer Dimension
- 3D printer Anycubic
- 3D printer German RepRap
- 3D printer Wanhao
- 3D printer Artillery
- 3D printer GooVer
- 3D printer Easy Threed
- 3D printer Zortrax
- 3D printer LulzBot
- 3D printer SINDOH
- 3D printer PP3DP
- 3D printer 3D Systems
- 3D printer Creality
- 3D printer Raise3D
Nyeste 3D printer Manualer
19 November 2024
19 November 2024
17 November 2024
15 November 2024
27 September 2024
13 September 2024
5 September 2024
3 September 2024
3 September 2024
1 September 2024