Crest Audio Versarray PRO 112 Manual

Crest Audio Højttaler Versarray PRO 112

Læs nedenfor 📖 manual på dansk for Crest Audio Versarray PRO 112 (18 sider) i kategorien Højttaler. Denne guide var nyttig for 34 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/18

Versarray™ Pro 112

Powered Enclosure

Product Specifications

e Crest Audio® Versarray™ Pro 112 Powered Ribbon Tweeter Line Source Array speaker system consists of a 12” Neo Black Widow®

woofer combined with a Neodymium based Peavey RD™ 2.6 MK III ribbon tweeter in a cabinet with a simple, quick, yet exible rigging

system. Designed to provide modular coverage of small to medium venues, and intended for use with the companion Crest Audio®

Versarray™ Pro Sub models, the Versarray™ Pro 112 oers excellent versatility with a very high performance capability. e two-way

system consists of the following driver components: a Peavey® 12” Black Widow ® Neo series woofer with Neodymium magnet struc-

ture. Capable of over 500W of continuous power handling (AES Std 2-1984), the woofer can handle a lot of sheer power. e high

frequencies are handled by two Peavey® RD™ 2.6 MK III ribbon tweeters utilizing a composite sandwich ribbon, a Neodymium magnet

system, and a low distortion CLEAR FORM™ waveguide.

Power for bi-amping is supplied by some very ecient power amplier systems, controlled by a sophisticated and rened DSP opera-

tions system with Dante connection capability. Total system power is 3400W total peak power, with 2000W peak power for the woofer,

and 1400W total peak power for the two ribbon tweeters. is sheer power is controlled precisely and processed by a high performance

DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection du-

ties with unfailing attention to every detail of the music.

A unique set of control buttons on the rear panel allow analog signal input and use without the need for a network controller, by setting

the system for typical use situations via push-button. is feature allows the use of the system without the requirement for a full-blown

digital networking controller or system.

e FlyQWIK™ adjustable rigging system provides for a classic straight line-array conguration, or a number of dierent angling op-

tions, providing easy aiming of the system. Angles between the array modules is adjustable from 0 degrees (straight), to 15 degrees in

2.5 degree increments. Flying and adjusting the coverage angles is all very quick and simple with the new FlyQWIK™ system.

Quick release push-lock pins are supplied with the rigging hardware to couple the Versarray™ Pro 112 modules together and lock the

angles between them into place, as well as for the rigging halo and y bar congurations of a line array. e exibility of the Versarray

system allows the use of anywhere from 1 to 15 Versarray™ Pro 112 modules in conjunction with anything from one Versarray 218 Pro

Sub to as many Versarray 218 or 215 Pro Subs as you can! An optional special groundstack bracket set mounts to the Versarray 218 Pro

Sub, and allows up to three of the Versarray™ Pro 112’s to be mounted on top of the Versarray 218 Pro Sub, and angled upward, for use

on stage in a stadium seating situation.

Features

• 2-way Bi-Amp Ribbon Line Source Array SR System

• 3400 Total Peak watts of system power

• 12” Neo Black Widow® 4” VC Peavey® Woofer

• Exclusive RD™ 2.6 MK III Ribbon Tweeters with Neo magnet and composite material sandwich ribbon

• Ribbon Tweeters mounted to our proprietary CLEAR FORM™ Waveguide

• 90 H by 15 V degree coverage pattern (per one cabinet)

• Modular Line Array System™ for ease of vertical coverage conguration

• MLAS™ EQ Presets provide professional results quickly

• Easy aiming FlyQWIK™ hardware rigging system

• Angle adjustable in 2 1/2 degree increments, from 0 to 15 degrees total angle between adjacent cabinets

• Full complement of DSP based limiting and compression to protect the drivers from overdrive conditions

• Fan cooled for maximum reliability

• Inputs are analog XLR in and/or Dante Ethernet audio network in.

• Analog Output ru connector is a male XLR

• Analog signal input use without the need for a digital network controller, via the use of rear panel push-button set-up.

• 18 mm 13 ply Baltic Birch enclosure with steel inner brackets

• Injection molded cabinet end caps, made from high impact material.

• Hammerhead™ polyurea black nish and black powder-coated cloth lined grilles

Produkt Specifikationer

Mærke:	Crest Audio
Kategori:	Højttaler
Model:	Versarray PRO 112

Har du brug for hjælp?

Hvis du har brug for hjælp til Crest Audio Versarray PRO 112 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Crest Audio Manualer

Crest Audio CPL 10+ Manual

14 December 2024

Crest Audio Versarray PRO 215 Manual

16 August 2024

Crest Audio CPL 6T Manual

2 August 2024

Crest Audio CPL 265B+ Manual

1 August 2024

Crest Audio CPL 8+ Manual

31 Juli 2024

Crest Audio Versarray 218 MKIII Manual

31 Juli 2024

Crest Audio CPL 25C+ Manual

31 Juli 2024

Crest Audio CPL 15+ Manual

29 Juli 2024

Crest Audio CPL 4T Manual

28 Juli 2024

Crest Audio CPL 26+ Manual

28 Juli 2024

Højttaler Manualer

Nyeste Højttaler Manualer

JBL Media 2000 Manual

20 December 2024

JBL Media Sub Manual

20 December 2024

JBL Media Sub 2000 Manual

20 December 2024

JBL SCS150 Manual

20 December 2024

JBL SAT Pair 135 Manual

20 December 2024

20 December 2024

20 December 2024

20 December 2024

20 December 2024

JBL Northridge E60 Manual

20 December 2024