Crofton GT-SPM-09 Manual

Crofton Salt/peberkværn GT-SPM-09

Læs nedenfor 📖 manual på dansk for Crofton GT-SPM-09 (3 sider) i kategorien Salt/peberkværn. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

User

Manual

YEAR S

WARRANTY

Imported by:

Globaltronics GmbH & Co. KG

Domstr. 19

20095 Hamburg

GERMANY

AFTER SALES SUPPORT

info@globaltronicssupport.com

0800 / 328 6020

MODEL:

GT-SPM-09

99279

12/2019

ELECTRIC

SALT/PEPPER MILL

A 1

Scope of supply⁄

Device parts

1On/off switch

2End cap

3Casing with motor

and battery holder

4Grinding material

container for salt or

pepper

5Grinding rod

6Conductor for light

7Protective cap

8Adjustment wheel

for grinding fineness

(coarse/fine)

9Light

10 Battery, 6x LR03

(AAA), 1.5 V

Additional scope of supply :

• 6x LR03 (AAA), 1.5 V

• Operating instructions

with guarantee

General

Read and keep

operating instructions

Read the instructions for

use, particularly the safety

instructions, with care, be-

fore using the electric salt/

pepper mill (hereinafter only

referred to as “mill”).

Failure to comply with these

instructions for use may lead

to serious injuries or damage

to the mill.

The instructions for use are

based on the valid standards

and rules in the European

Union.

Please also note the coun-

try-specific directives and

laws abroad.

Keep the instructions for use

and the till receipt. If you

pass the mill on to third par-

ties, please also ensure that

you pass on these instruc-

tions for use for continued

use.

Explanation of

symbols

The following symbols and

signal words are used in

these instructions for use or

on the packaging.

WARNING!

This signal symbol/word in-

dicates a hazard with a me-

dium degree of risk, which

could lead to death or seri-

ous injury if it is not avoided.

CAUTION!

This signal symbol/word in-

dicates a hazard with a low

degree of risk, which could

lead to minor or moderate

injury if it is not avoided.

NOTE!

This signal word warns

of possible damage to

property.

This symbol gives

you useful addi-

tional information

about use.

− Children may not

play with the mill.

Cleaning and main-

tenance by the

user must not be

performed by chil-

dren unless they

are 8years of age

and older and are

supervised.

− Keep children away

from the mill.

− Do not leave the

mill unattended

during operation.

− Do not let children

play with the pack-

aging film. Chil-

dren may become

caught in it while

playing and suffo-

cate.

CAUTION!

Injury hazard!

Improper handling of the

batteries result in injuries.

− Remove the batteries from

the mill, if they are deplet-

ed or if you are not using

the mill for a longer period

of time. This way, you can

avoid leaking battery acid.

− Do not expose the batter-

ies to any extreme condi-

tions by e.g. laying them

on a radiator or exposing

them to direct sunlight.

This increases the risk of

the batteries leaking.

NOTE!

Risk of damage!

Improper handling of the

mill may result in damage.

− Make certain that you

have inserted the bat-

Conformity dec-

laration (refer to

„Conformity decla-

ration” chapter):

Products that are

marked with this

symbol fulfil all

applicable Commu-

nity regulations of

the European Eco-

nomic Area.

Safety

Intended use

The mill is exclusively de-

signed for grinding salt and

pepper. The mill is exclusive-

ly intended for private use

and is not suitable for the

commercial sector. The mill is

not a toy.

Only use the mill as de-

scribed in these instructions

for use. Any other use shall

be regarded as improper

and can lead to material

damage. The manufacturer

or retailer shall not assume

any liability for losses caused

by intended or improper use.

Safety instructions

WARNING!

This article can be used by

persons with reduced phys-

ical, sensory or mental capa-

bilities or lack of experience

and knowledge if they have

been given supervision or

instruction concerning use

of the mill in a safe way and

understand the hazards

involved.

teries with the correct

polarity (+/-), in order to

avoid damaging the mill.

− If necessary, clean the

battery and device con-

tacts prior to insertion.

− Always replace all batter-

ies. Do not use different

types of batteries, battery

brands or batteries with

different capacities.

− Do not ﬁll the grinding

material container right

up to the top edge,

please note the maxi-

mum ﬁling level (see “Fill

with grinding material”).

− The salt crystals may

expand from moisture, so

that the container could

burst.

− Only switch the mill on,

if it is ﬁlled with grinding

material (salt or pepper).

Otherwise, the grind-

ing mechanism may be

damaged.

− Do not make any mod-

iﬁcations to the mill.

Only allow repairs to be

carried out by a profes-

sional workshop and pay

attention to the guaran-

tee conditions. The

− mill may become dam-

aged due to non-profes-

sional repair.

Prior to initial use

Unpacking and

inspection

1. Check whether the deliv-

ery is complete (see Fig. A

and B).

2. Take the mill out of the

packaging and check

whether the mill or the

spare parts are damaged.

If this is the case, do not

use the mill. Contact the

manufacturer.

3. Remove the packaging

material and all protec-

tive films and dispose of

these properly.

Inserting⁄replacing

batteries

WARNING!

Danger of poisoning!

Batteries can be life-endan-

gering if swallowed.

− Therefore, keep the mill

and batteries out of

reach for small children.

If a battery has been

swallowed, immediately

contact a physician.

− Avoid contact by battery

fluid with the skin, eyes

and mucous mem-

branes. When coming

into contact with battery

fluid, immediately rinse

the affected area with

clear water and contact a

physician.

WARNING!

Fire and explosion hazard!

Improper handling of the

batteries result in injuries.

− Do not recharge the

batteries and do not try

to reactivate them using

other means.

− Do not dismantle the

batteries.

− Never throw batteries

into fire.

− Never short-circuit the

batteries.

To replace the batteries, pro-

ceed as follows:

1. Hold the casing 3

tightly and turn the end

cap 2 with your other

hand, counter-clockwise,

as far as it will go.

The mark on the end

cap must point to the

open lock symbol.

2. Remove the battery

holder from the casing.

3. Remove the old batteries.

Please note the disposal

instructions.

4. Insert six new batteries

10 (type AAA/LR03) as

shown on the base of the

battery holder.

Pay attention to the cor-

rect polarity (+/-).

5. Put the end cap back on

and turn it clockwise, as

far as it will go.

The mark on the end

cap must point to the

closed lock symbol.

Fill with grinding

material

1. Hold the casing 3

tightly and with the other

hand, turn the grinding

material container 4

counter-clockwise as far

as it will go.

The mark on the end

cap must point to the

open lock symbol.

2. Pull off the spice cham-

ber in a downwards

direction.

3. Fill the grinding material

container up to 80%

with salt crystals or

peppercorns.

4. Place the casing on the

grinding material con-

tainer and turn the grind-

ing material container

clockwise as far as it will

go.

The mark on the end

cap must point to the

closed lock symbol.

The mill is now locked and

ready for use.

Use

NOTE!

Risk of damage!

Improper use of the mill may

result in damage.

− Only switch the mill on,

if it is filled with grinding

material (salt or pepper).

The advantage of a mill is

that it only grinds the salt

or pepper once you require

the respective ingredient.

This way, the spice has more

flavour.

1. Remove the protective

cap 7.

2. Hold the mill over the

food to be seasoned and

press the on/off switch

1. The grinding mech-

anism and lamp 9

remain switched for on as

long as you press the on/

off switch.

3. Replace the protective

cap after use.

WARRANTY CARD

ELECTRIC SALT⁄PEPPER MILL

Description of malfunction:

Your details:

Date and location of purchase:

Name:

Adress:

E-Mail:

00800 / 4467 5888

Please check: stainless steel gun metal white r r r

Please contact our AFTER SALES SUPPORT by phone or e-mail before

sending in the device. This allows us to provide support in the event of

possible operator errors.

info@globaltronicssupport.com

99279

MODEL:

12/2019

GT-SPM-09

AFTER SALES SUPPORT

PRODUCT CODE

Globaltronics Service Center

c/o Bridges Logistics

PO Box 1125

Bromley, BR1 9TW, UNITED KINGDOM

info@globaltronicssupport.com

PO51002390

SERVICE CENTER

0800 / 328 6020

GB 00800 / 4467 5888

Produkt Specifikationer

Mærke:	Crofton
Kategori:	Salt/peberkværn
Model:	GT-SPM-09

Har du brug for hjælp?

Hvis du har brug for hjælp til Crofton GT-SPM-09 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Salt/peberkværn Crofton Manualer

Crofton GT-SPM-09 Manual

27 August 2024

Salt/peberkværn Manualer

Nyeste Salt/peberkværn Manualer

Wesco 322 774-57 Manual

22 September 2024

Ernesto Z29535 Manual

17 September 2024

Cuisinart SG6U Manual

1 September 2024

Cuisinart SG6SU Manual

1 September 2024

Wesco 322 774-19 Manual

31 August 2024

Tescoma President 659560 Manual

30 August 2024

28 August 2024

28 August 2024

24 August 2024

24 August 2024