CTA Digital PAD-AALDS Manual


Læs nedenfor 📖 manual på dansk for CTA Digital PAD-AALDS (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
PAD-AALDS
SUPPORT@CTADIGITAL.COM
Instructions:
Use this table to determine the appropriate
foam pad to use with your tablet.
Note: sizes refer to total tablet size with or
without a case.
m
m
Foam Pad
Thickness
Tablet
Thickness:
1mm 0.67-1.06in
5mm 0.51-0.91in
10mm 0.31-0.71in
17-27m
13-23m
8-18mm
/
/
/
1.Attaching Foam Pad to Tablet Holder
Select the appropriate foam pad according
to the thickness of your tablet (or tablet in its
case), then press adhesive side into center
of the tablet holder.
1mm Foam Pad
5mm
Foam
Pad
10mm
Foam
Pad
for 7-13 Inch Tablets
Angle-Adjustable Locking Desktop Stand
at point
Use Allen key to adjust tension of connection between the tablet holder and metal block .
LOCK
UNLOCK
LOCK
UNLOCK
LOCK
UNLOCK
2. Your Stand Mounting
2. Insert key and lock the holder, then take out the key,
ins your device lide the arm ert corner first. S back in until it
is tightly gripping your tablet by the corners.
LOCK
UNLOCK
LOCK
UNLOCK
1. Insert key and unlock the holder, then slide take out the key,
the arm to open to a width according to your need.
4. Adjusting your Tablet Holder:
Package Contents:
Keys
Screws
Foam Pads
1mm
5mm
10mm
1. Insert screw into hole on the stand
base and use a Phillips head
screwdriver to tighten.
3. Installing Your Device:
2. Repeat step 1 .for all screws
Allen Key


Produkt Specifikationer

Mærke: CTA Digital
Kategori: Ikke kategoriseret
Model: PAD-AALDS

Har du brug for hjælp?

Hvis du har brug for hjælp til CTA Digital PAD-AALDS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret CTA Digital Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024