CyberPower CP685AVRG Manual

CyberPower Uafbrydelig strømforsyning (UPS) CP685AVRG

Læs nedenfor 📖 manual på dansk for CyberPower CP685AVRG (2 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

OVERVIEW

The CP825AVRLCDG/CP685AVRLCDG/

CP800AVR/CP685AVRG provides complete

power protection from utility power that is

not always consistent. The CP825AVRLCDG/

CP685AVRLCDG/CP800AVR/CP685AVRG

features 1030 Joules of surge protection. The

unit provides long lasting battery backup

during power outages with maintenance free

batteries. The CP825AVRLCD/CP685AVRLDG/

CP800AVR/CP685AVRG ensures consistent

power to your computer system and includes

software that will automatically save your

open ﬁles and shutdown your computer sys-

tem during a utility power loss.

HOW TO DETERMINE THE POWER REQUIRE-

MENTS OF YOUR EQUIPMENT

1. Ensure that the equipment plugged

into the UPS does not exceed the UPS

unit’s rated capacity (825VA/450W for

CP825AVRLCDG, 800VA/450W

for CP800AVR, 685VA/390W for

CP685AVRLCDG, CP685AVRG). If the rated

capacities of the unit are exceeded, an

overload condition may occur and cause

the UPS unit to shut down or the circuit

breaker to trip.

2. There are many factors that can aect

the amount of power that your electronic

equipment will require. For optimal system

performance keep the load below 80% of

the unit’s rated capacity.

HARDWARE INSTALLATION GUIDE

1. Your new UPS

may be used

immediately

upon receipt.

However, after

receiving a

new UPS, to ensure the battery’s maximum

charge capacity, it is recommended that

you charge the battery for at least 8 hours.

Your UPS is equipped with an auto-charge

feature. When the UPS is plugged into an AC

outlet, the battery will automatically charge

whether the UPS is turned on or turned o.

Note: This UPS is designed with a safety fea-

ture to keep the system from being turned

on during shipment. The ﬁrst time you turn

the UPS on, you will need to have it connect-

ed to AC power or it will not power up.

2. With the UPS unit turned o and un-

plugged, connect your computer, monitor,

and any other peripherals requiring battery

backup into the battery power supplied

outlets. Plug the other peripheral equip-

ment (eg. printer, scanner, speakers, etc.)

into the full-time surge protection outlets.

DO NOT plug a laser printer, paper shred-

der, copier, space heater, vacuum cleaner,

sump pump, or other large electrical device

into the “Battery and Surge Protected Out-

lets”. The power demands of these devices

will overload and possibly damage the unit.

3. Plug the UPS into a 2-pole, 3-wire grounded

receptacle (wall outlet). Make sure the wall

branch outlet is protected

by a fuse or circuit break-

er and does not service

equipment with large

electrical demands (e.g.

air conditioner, refrigerator, copier, etc.).

The warranty prohibits the use of extension

cords, outlet strips, and surge strips in con-

junction with the UPS unit.

4. Press the power switch to turn the unit on.

The Power On indicator light will illuminate

green and the unit will “beep” once.

5. If an overload is detected, an audible alarm

will sound and the unit will emit one long

beep. To correct this, turn the UPS o and

unplug at least one piece of equipment

from the battery power supplied outlets.

Make sure the circuit breaker is depressed

and then turn the UPS on.

6. To maintain optimal battery charge,

leave the UPS plugged into an AC outlet

at all times.

7. To store the UPS for an extended period

of time, cover it and store with the battery

fully charged. While in storage, recharge

the battery every three months to ensure

optimal battery life.

8. Ensure the wall outlet and UPS are locat-

ed near the equipment being attached for

proper accessibility.

YOUR ULTIMATE ALLY IN POWER

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400 | Shakopee, MN 55379 | CyberPowerSystems.com

AVR UPS SERIES

CP825AVRLCDG / CP685AVRLCDG / CP800AVR / CP685AVRG

USER MANUAL

FEATURES

1. Power Switch

2. Power On Indicator

3. Mode Switch

For CP825AVRLCDG / CP685AVRLCDG

4. Fault Indicator

5. Mute Button

For CP800AVR / CP685AVRG

6. LCD module display

For CP825AVRLCDG / CP685AVRLCDG

7. Battery and Surge Protected Outlets

8. Full-Time Surge Protection Outlets

9. USB Port

10. Communication Protection Ports

For CP825AVRLCDG

11. Serial Port

12. Circuit Breaker and Reset

13. Ground Screw

14. Outlets Designed for AC Adapters

Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed

power protection, operation, and performance during the lifetime of the product. Please take

a few minutes to register your product at: www.CyberPowerSystems.com/registration. Regis-

tration certiﬁes your product’s warranty, conﬁrms your ownership in the event of a product loss

or theft, and entitles you to free technical support. Register your product now to receive the

beneﬁts of CyberPower ownership.

CAUTION! To prevent the risk of ﬁre or

electric shock, install in a temperature and

humidity controlled indoor area free of

conductive contaminants. (Please see

speciﬁcations for acceptable temperature

and humidity range).

CAUTION! To reduce the risk of electric shock,

do not remove the cover except to service the

battery. Turn o and unplug the unit before

servicing the batteries. There are no user ser-

viceable parts inside except for the battery.

CAUTION! Hazardous live parts inside can be

energized by the battery even when the AC

input power is disconnected.

CAUTION! The UPS must be connected to an

AC power outlet with fuse or circuit breaker

protection. Do not plug into an outlet that is

not grounded. If you need to de-energize this

equipment, turn o and unplug the unit.

CAUTION! To avoid electric shock, turn o the

unit and unplug it from the AC power source

before connecting equipment to the unit.

CAUTION! To reduce the risk of ﬁre, connect

only to a circuit provided with 20 amperes

maximum branch circuit over current protec-

tion in accordance with the National Electric

Code, ANSI/NFPA 70.

CAUTION! Not for use in a computer room as

deﬁned in the Standard for the Protection of

Electronic Computer / Data Processing Equip-

ment, ANSI/NFPA 75.

CAUTION! Do not dispose of batteries in a ﬁre.

The batteries may explode.

CAUTION! Do not open or mutilate batteries.

Released electrolyte is harmful to the skin and

eyes. It may be toxic.

DO NOT USE FOR MEDICAL

OR LIFE SUPPORT EQUIPMENT!

CyberPower Systems does not sell products

for life support or medical applications. DO

NOT use in any circumstance that would aect

operation and safety of life support equip-

ment, any medical applications or patient care.

DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce the risk of ﬁre or electric shock, do

not use with or near an aquarium. Condensa-

tion from the aquarium can cause the unit to

short out.

DO NOT USE THE UPS

ON ANY TRANSPORTATION!

To reduce the risk of ﬁre or electric shock, do

not use the unit on any transportation such

as airplanes or ships. The eect of shock or

vibration caused during transit and the damp

environment can cause the unit to short out.

PRODUCT REGISTRATION

IMPORTANT SAFETY WARNINGS (SAVE THESE INSTRUCTIONS)

This manual contains important safety instructions. Please read and follow all instructions carefully

during installation and operation of the unit. Read this manual thoroughly before attempting to

unpack, install, or operate your UPS.

INSTALLING YOUR UPS SYSTEM - continued

UNPACKING

Inspect the UPS upon receipt.

The box should contain the following:

(a) UPS unit

(b) User’s manual

PowerPanel® Personal software is

available on our website. Please visit

www.cyberpowersystems.com and go

to the Software Section for a free download.

AUTOMATIC VOLTAGE REGULATOR

The CP825AVRLCDG/CP685AVRLCDG/

CP800AVR/CP685AVRG stabilizes inconsistent

utility power to nominal levels that are safe for

equipment. Unstable utility power can be dam-

aging to important data and hardware.

With Automatic Voltage Regulation (AVR),

damaging voltage levels

are corrected to safe

levels. AVR automatically

increases low utility power

to a consistent and safe

110/120 volts.

BASIC OPERATION

INSTALLING YOUR UPS SYSTEM

1. Power Switch:

Used as the master on/o switch for equip-

ment connected to the battery power sup-

plied outlets. To turn the UPS ON, press the

power button for approximately 2 seconds

- you will hear a constant tone (1 second) -

and release after a short beep.

To turn the UPS OFF, press the power

button for approximately 2 seconds - you

will hear a constant tone (1 second) - and

release after two short beeps.

Alarm setting (For CP825AVRLCDG/

CP685AVRLCDG): The audible alarm can

be turned O or On by double clicking

the POWER button. The default setting is

for the Alarm On. To turn the Alarm O,

double click the button. You will hear two

short beeps when the Alarm is turned o.

To turn the Alarm back On, double click the

button. You will hear a single short beep

when the Alarm is turned on. *When the

Alarm is turned O, there will be no audible

notiﬁcation when the UPS reaches a low

battery state.

2. Power On Indicator:

This LED is illuminated when the utility

power is normal and the UPS outlets are

providing power, free of surges and spikes.

3. Mode Switch

(For CP825AVRLCDG/CP685AVRLCDG):

Press the Mode Switch for approximately

3 seconds to enter setup mode to view

options: Utility High/low Voltage range,

sensitivity setup, LCD sleep ON/OFF, bat-

tery test, buzzer ON/OFF, and low battery

alarm. When an option is selected, wait for

8 seconds for the setting to be conﬁrmed.

After the setting has been conﬁrmed the

LCD screen will leave setup mode and go

back to status display. If there is no action

for 8 seconds during setup, the LCD will

also leave setup mode and go back to the

status display.

4. Fault Indicator:

This LED is illuminated if there is a problem

with the UPS.

5. Mute Button

(For CP800AVR/CP685AVRG):

Press the button for 2 seconds to enable

the audible alarm (beeps once) or disable

(beeps twice) the audible alarm.

6. LCD module display

(For CP825AVRLCDG/CP685AVRLCDG):

LCD display shows all the UPS information

using icons and messages. For more infor-

mation please review the “Deﬁnitions for

Illuminated LCD Indicators” section.

7. Battery and Surge Protected Outlets:

The unit has four battery powered and

surge protected outlets to ensure tempo-

rary uninterrupted operation of your equip-

ment during a power failure.

8. Full-Time Surge Protection Outlets:

The unit has four surge suppression outlets.

9. USB Port:

The USB port allows connection and com-

munication between the USB port on the

computer and the UPS unit.

10. Communication Protection Ports

(For CP825AVRLCDG):

Communication protection ports, bidirec-

tional, will protect a 10/100/1000 Ethernet

connection (RJ45).

11. Serial Port:

Serial Port allow for bi-directional commu-

nication among the UPS and the comput-

er.The UPS can control the computer’s

shutdown in case of an emergency, and at

the same time, the computer can monitor

the UPS and alter its various programmable

parameters.

12. Circuit Breaker and Reset:

Located on the side of the UPS, the

circuit breaker provides overload and

fault protection.

13. Ground Screw:

The ground screw is used for any

equipment that needs a chassis ground

connection.

14. Outlets Designed for AC Adapters:

The UPS unit has four widely-spaced out-

lets. AC power adapters can be plugged

into the UPS without overlapping or block-

ing adjacent outlets.

3 4

CP825AVRLCDG

CP685AVRLCDG

CP800AVR

CP685AVRG

Produkt Specifikationer

Mærke:	CyberPower
Kategori:	Uafbrydelig strømforsyning (UPS)
Model:	CP685AVRG
Bredde:	11 mm
Dybde:	3.5 mm
Højde:	6.8 mm
Vægt:	5300 g
Produktfarve:	Sort
Batterispænding:	12 V
Batterikapacitet:	7 At
USB-port:	Ja
Batteriteknologi:	Blybatterier (VRLA)
Formfaktor:	Kompakt
Responstid:	4 ms
Relativ luftfugtighed ved drift (H-H):	0 - 90 %
Driftstemperatur (T-T):	0 - 35 °C
Kabler inkluderet:	Indgangsstrømkabel
Udgangseffekt:	390 W
LED-indikatorer:	Ja
Opladningstid for batteri:	8 t
Bæredygtighedscertifikater:	RoHS
Indgangsfrekvens:	57/63 Hz
Antal battericeller:	1
Lydalarmer:	Ja
Antal serielle porte:	1
Strømstik:	NEMA 5-15P
Sikkerhed:	UL1778, cUL 107.3, FCC DOC Class B
AC udgange, antal:	8 AC stikkontakt(er)
Overspænding energivurdering:	1030 J
Indgående driftsspænding (maks.):	140 V
Output strømkapacitet (VA):	0.685 kVA
Indgående driftsspænding (min.):	90 V
Udgangs driftsspænding (min.):	120 V
Udgangs driftsspænding (maks.):	120 V
UPS topologi:	Interaktivt indgangsstik
Beskyttelse ved overspænding:	Ja
Bølgeform:	Sine
Hørbare alarmtilstande:	Low battery alarm, Overload alarm
Typisk backup tid ved halv styrke:	11 min.
Typisk backup tid ved fuld styrke:	2 min.
Seriegrænseflade:	Ja
Automatisk spændingsregulering (AVR):	Ja
Uddgående frekvens:	50/60 Hz
Udskiftningsbatteri:	RB1270B
Regulering af udgangsspænding:	5 %