CyberPower SB0802AD-DE-B24 Manual

CyberPower Ikke kategoriseret SB0802AD-DE-B24

Læs nedenfor 📖 manual på dansk for CyberPower SB0802AD-DE-B24 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Cord Management Installation:
Installation:
A. Power Connections
1. The surge protector must be plugged into a properly
grounded outlet.
2. Plug all connected equipment directly into the surge
protector.
Note:
DO NOT connect to an ungrounded outlet. DO NOT use
with 2-wire extension cords or adapters. This surge protector
is designed for indoor use only. Install the surge protector
away from heat emitting appliances such as radiators or
heat generators. Do not install where excessive moisture is
present.
Never install electrical or telephone wiring during a lightning
storm.
DO NOT USE FOR MEDICAL, LIFE SUPPORT
EQUIPMENT OR OTHER HIGH RISK ACTIVITIES.
B. Phone/Fax/Modem Connections (Select Models)
To prevent surge damage to telephone equipment, connect
the Phone/Fax/Modem through the surge protector.
If your surge protector has phone jacks:
1. Connect the Phone/Fax/Modem line from your wall
outlet to the IN jack of the surge protector.
2. Connect the phone cord, (not included in this
product), into the OUT jack on the surge protector.
3. Connect the other end of the phone cord to the
Phone/Fax/Modem jack of the device you want to
protect.
C. Coax Cable Connections (Select Models)
To protect a TV or DVR from surge damage, connect the
coax cable through the surge protector.
If you are using a coax cable and your surge protector is
equipped with coax jacks:
1. Connect the Cable/Antenna line from your source to
the IN jack on the surge protector.
2. Connect a coax cable from the OUT jack of the surge
protector to the device you want to protect.
D. Mounting the Surge Protector
You can mount the surge protector to a vertical surface with
just two screws, (not included), using the eye loops provided
at the backside of the Protector.
Power Switch/Indicator
Used as the master on/off switch for outlets. The indicator
light is on when power on. When power off, the indicator
light is off as well.
Warranty
CyberPower warrants this product to be free from defect in
electrical parts or manufacture for two (2) years. If a defect
results in product failure during its normal use within the
warranty period, please contact your local dealers and/or
distributors for warranty services.
A
B
C
EN
Caution:
RISK OF ELECTRIC SHOCK – USE ONLY IN DRY
LOCATIONS AND ONLY INDOORS.
" DO NOT PLUG INTO ANOTHER SURGE
PROTECTOR, POWER STRIP, EXTENSION CORD
OR OTHER RELOCATABLE POWER TAP."
This device features an internal protection that will
disconnect the surge protective component at the end of
its useful life but will maintain power to the load now
unprotected.
CyberPower Systems
www.cyberpower.ru
© 2013 CyberPower Systems, Inc.
All rights reserved. All other
trademarks are the property of their respective owners
K09-0000142-01


Produkt Specifikationer

Mærke: CyberPower
Kategori: Ikke kategoriseret
Model: SB0802AD-DE-B24

Har du brug for hjælp?

Hvis du har brug for hjælp til CyberPower SB0802AD-DE-B24 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret CyberPower Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron

Elektron Overbridge Manual

26 November 2024
Elektron

Elektron Sidstation Manual

26 November 2024
SoundTube

SoundTube IPD-RS82-EZ Manual

26 November 2024
Kramer

Kramer 4x1VB Manual

26 November 2024
Kramer

Kramer RC-63A Manual

26 November 2024
SoundTube

SoundTube IPD-HP82-EZ Manual

26 November 2024
Kramer

Kramer RK-KVM-1U-PP3 Manual

26 November 2024
Gioteck

Gioteck VX-2 (PS3) Manual

26 November 2024