Cygnett ChargeUp Explorer Manual

Cygnett power bank ChargeUp Explorer

Læs nedenfor 📖 manual på dansk for Cygnett ChargeUp Explorer (4 sider) i kategorien power bank. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

A - Power button

B - Battery indicator

C - USB output 1

D - USB output 2

E - Micro-USB input

F - Unit holster

G - LED Flashlight

Product speciﬁcations

Cell Type: Lithium-polymer

Battery capacity: 8000mAh/29.6Wh

Solar Panel Input: DC 5V 0.25A (Max/pc)

Input: DC 5V/2A (Max)

USB-1 Output: DC 5V/2.1A (Max)

USB-2 Output: DC 5V/2.1A (Max)

Dimensions: 155x81.50x15.50mm

Micro USB Charging Time: 5H

Solar Charging Time: 15-20H

Weight: 270g

Usage:

Compatible with most smartphones, tablets, and other USB devices.

The equipment must not be operated while charging

ADE

How to recharge your ChargeUp Explorer using Micro-USB

To recharge your ChargeUp Explorer, connect the power bank to a USB wall charger or USB car charger via the Micro-USB input , using the Micro-USB cable provided. (E)

When charging, the battery indicator will ﬂash, showing the current charge level.(B)

How to recharge your ChargeUp Explorer using solar panels

To recharge your ChargeUp Explorer using the detachable solar panels, make sure unit is ﬁrmly installed into unit holster , so the solar touchpoints make direct contact with (F)

the power bank. Solar panels must be fully extended, facing the sun as much as possible; battery indicator ( will ﬂash green sun symbol when panels are solar charging. B)

Recharging the power bank using solar panels will take 15-20 hours (approx.). NOTE: Charge time will be longer if at a wrong angle or if sky is cloudy. Standard sunshine refers

to industry standard light intensity of 1000W/m2, opposite to the angle of the sun, and with no glass or shadowy obstacles in the way.

How to charge your device

Using your device’s USB charging cable (not included), connect your device to one of the two USB outputs . Press the power button once to start charging your (C or D) (A)

device. Your device should indicate that it has begun to charge. The battery indicator display will now indicate the ChargeUp Explorer’s remaining charge. Repeat steps (B)

above to charge a second device. When you are ﬁnished charging your device/s, detach them from your ChargeUp Explorer. It will turn oﬀ automatically.

Torch

Built-in torch contains strong outdoor lighting with SOS functions. Press power button for 5 seconds for LED lighting to come on, continue to press power button to (A)

switch SOS functions.

ChargeUp Explorer