Da-Lite Large Advantage Electrol Manual
Da-Lite
Projektionslærred
Large Advantage Electrol
Læs nedenfor 📖 manual på dansk for Da-Lite Large Advantage Electrol (2 sider) i kategorien Projektionslærred. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
SUGGESTED SPECIFICATIONS: _______________ projection screen(s), (H) x __________ ____________ (W), electrically operated 120 volt
(60Hz), not more than 2.4 amp with a quick connect male plug-in connector on the motor. Shall have specially designed motor mounted
inside the roller, to be three wire with ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears,
capacitor and an electric brake to prevent coasting. To have preset but adjustable limit switches to automatically stop picture surface in
the “up” and “down” positions. Junction box shall be internally integrated into the housing making it possible to install the housing and
wire to the building’s electrical system during construction. The junction box shall contain a quick connect connector that is mounted in
the housing for easy plug-in connection to the motorized fabric and roller assembly.
Rigid metal roller, to be at least 5¾" in diameter (on
screens 14' to 18' wide) or 7" in diameter (on screens where either height or width equal or exceed 20')
. The motorized fabric and roller
assembly to be installed in the case at the factory or at a later time at the job site. Roller mounting brackets to be adjustable to allow
centering or offsetting of the screen within the case. Screen to be designed for left or right-hand motor installation. Screen fabric to be
flame retardant and mildew resistant fiberglass with black masking borders standard. Bottom of fabric shall be formed into a pocket
holding a metal rod. Heavy duty plastic caps shall protect the ends of the rod. Case to be made of extruded aluminum powder coated
white. End caps to be of heavy gauge steel, powder coated white. Bottom of case to have a removable access door. Door to be of
extruded aluminum powder coated white. Bottom of case to be self-trimming, with a built-in flange around the bottom of the case. To be
complete with a three-position control switch and cover plate.
Suitable for use in environmental air space in accordance with section 300-
22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical Code, part 1, CSA C22.1.
Screen
to be listed by Underwriters’ Laboratories.
Matte White: Horizontal seam required when both dimensions exceed 16'.
SQUARE FORMAT DIMENSIONS (screens with ^ have 2" standard black drop at top)
Sizes Overall Length of Case (does not include flange) Approx. Ship. Wt.
H x W Cm In. Cm Lbs. Kg
10'6" x 14'^ 320 x 427 183½" 466 554 251.3
14' x 14' 427 x 427 183½" 466 565 256.3
12' x 16'^ 366 x 488 207½" 527 628 284.9
16' x 16' 488 x 488 207½" 527 637 288.9
13'6" x 18'^ 411 x 549 231½" 588 702 318.3
18' x 18' 549 x 549 231½" 588 721 327.0
15' x 20'^ 457 x 610 255½" 649 810 367.4
20' x 20' 610 x 610 255½" 649 834 378.3
16'6" x 22'^ 503 x 671 279½" 710 891 404.2
22' x 22' 671 x 671 279½" 710 920 417.3
18' x 24'^ 549 x 732 303½" 771 973 441.3
DA-LITE SCREEN COMPANy, INC.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
HDTV (16:9) FORMAT DIMENSIONS (2" standard black drop at top)
Viewing Area Nominal Diagonal Overall Length of Case (does not include flange) Approx. Ship. Wt.
H x W Cm In. Cm In. Cm Lbs. Kg
106 x 188 269 x 478 216 549 207½" 527 616 279.4
119 x 212 302 x 538 243 617 231½" 588 688 312.1
133 x 236 338 x 599 271 688 255½" 649 793 359.7
VIDEO (NTSC 4:3) FORMAT DIMENSIONS (2" standard black drop at top)
Viewing Area Nominal Diagonal Overall Length of Case (does not include flange) Approx. Ship. Wt.
H x W Cm In. Cm In. Cm Lbs. Kg
123" x 164" 312 x 417 210" 533 183½" 466 553 250.8
141" x 188" 358 x 478 240" 610 207½" 527 627 284.4
159" x 212" 404 x 538 265" 673 231½" 588 702 318.4
177" x 236" 450 x 599 295" 749 255½" 649 780 353.8
SPECIFICATION DATA
LARGE ADVANTAGE®
ELECTROL®
Automatic Electric Projection Screen Model
Overall case length dimensions ±¼ (6mm)".
Detail dimensional drawings, wiring diagrams and installation instructions available upon request.
Specifications subject to change without notice.
Custom formats and sizes available upon request.
WIDE (16:10) FORMAT DIMENSIONS
Viewing Area Nominal Diagonal Overall Length of Case (does not include flange) Approx. Ship. Wt.
H x W Cm In. Cm In. Cm Lbs. Kg
110" x 176" 279 x 447 208" 528 195½" 497 631 286.2
1171⁄ " x 188" 283 x 478 222" 564 207½" 527 662 300.32
Produkt Specifikationer
| Mærke: | Da-Lite |
| Kategori: | Projektionslærred |
| Model: | Large Advantage Electrol |
Har du brug for hjælp?
Hvis du har brug for hjælp til Da-Lite Large Advantage Electrol stil et spørgsmål nedenfor, og andre brugere vil svare dig
Projektionslærred Da-Lite Manualer
1 Oktober 2024
26 September 2024
30 August 2024
11 August 2024
10 August 2024
8 August 2024
6 August 2024
6 August 2024
5 August 2024
5 August 2024
Projektionslærred Manualer
- Projektionslærred Pyle
- Projektionslærred Kodak
- Projektionslærred Optoma
- Projektionslærred Elite
- Projektionslærred NEC
- Projektionslærred AV:link
- Projektionslærred Draper
- Projektionslærred Vestel
- Projektionslærred Oregon Scientific
- Projektionslærred GPX
- Projektionslærred Duronic
- Projektionslærred Elite ProAV
- Projektionslærred Luxburg
- Projektionslærred Elite Screens
- Projektionslærred EluneVision
- Projektionslærred Celexon
- Projektionslærred Lumene
- Projektionslærred Stewart
- Projektionslærred Avers
- Projektionslærred Instaal
- Projektionslærred KHOMO GEAR
- Projektionslærred EPV
Nyeste Projektionslærred Manualer
22 September 2024
19 September 2024
6 September 2024
5 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024
2 September 2024
2 September 2024