Dot Line DL-1492 Manual

Dot Line Fjernbetjening DL-1492

Læs nedenfor 📖 manual på dansk for Dot Line DL-1492 (1 sider) i kategorien Fjernbetjening. Denne guide var nyttig for 31 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
3 Ft. Remote Release
Instructions
Features:
This cord allows a camera to be
triggered from a distance up to
3 ft away.
Installing the Cord
• Plug the cord into the remote
release socket on the camera.
Please refer to the instruction
manual for the location.
Using the Cord
• Momentary Position: Turn the
camera on. Press the button in
slightly and the camera will
prefocus. Continue pressing the
button in to release the camera.
• Continuous Position: Push the button up revealing the
orange line. The camera shutter will stay open (in the B
position) or continue to make exposures until the button on
the remote release in slid back to the momentary position.
Models Available:
DL-1480 For Canon EOS Rebel
Series 3.5 Mini-plug
DL-1482 For Canon 3 Pin
Series 3.5 Mini-plug
DL-1484 For Nikon D70, D80S
Series (1 Pin)
DL-1486 For Nikon D100 D200
D2X D2Xs Series (10 Pin)
(Other models may become
available after this printing.)
DL-1490 For Pentax
DL-1492 For Sony A100
DL-1480 Series
Standard Style 1 Year Limited Warranty.
Dot Line Corp. warrants that if the accompanying product proves to be
defective to the original purchaser in material or workmanship within 1
year from the original retail purchase, Dot Line Corp. will, at its option,
either repair or replace same without charge (but no cash refund will be
made).
What you must do to enforce the warranty: You must deliver, mail or
ship the product together with the original bill of sale, to:
Dot Line Corp. 9420 Eton Ave., Chatsworth, CA 91311
Phone 1-800-423-2624 Fax 818-700-9797.
Limitation of Liability and Remedies: This warranty is void if any
defects are caused by abuse, misuse, negligence or unauthorized
repairs. All liability for incidental or consequential damages is specifically
excluded. The company shall have no liability for any damages due to
lost profits, loss of use or anticipated benefits, or other incidental,
consequential, special or punitive damages arising from the use of, or
inability to use, this product, whether arising out of contract, negligence,
tort, or under any warranty, even if the company has been advised of the
possibility of such damages. The Company’s liability for damages in no
event shall exceed the amount paid for the product. The Company
neither assumes nor authorizes anyone to assume for it any other
liabilities.
Some states do not allow for the exclusion of incidental or consequential
damages, so the above exclusion may not apply to you. This warranty
gives you specific legal rights and you may have other rights which vary
from state to state.
Marketed exclusively by:
Dot Line Corp. 9420 Eton Ave.
Chatsworth, CA 91311
818-700-9997 • Fax 818-700-9797
www.dotlinecorp.com
Product Made in China © Dot Line Corp. 2007
These Instructions are for DL-1480 Series Remote Release Cords.
Specifications are subject to change. Printed June 2007.
Momentary
Position
Continuous
Position
For Canon EOS
and Pentax
For Canon 3 PIN
For Nikon 1 Pin For Nikon 10 Pin
(Other models may become available after this printing.)

Produkt Specifikationer

Mærke: Dot Line
Kategori: Fjernbetjening
Model: DL-1492

Har du brug for hjælp?

Hvis du har brug for hjælp til Dot Line DL-1492 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Fjernbetjening Dot Line Manualer

Dot Line

Dot Line DL-1492 Manual

9 Juni 2024

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer

Nanlite

Nanlite BT-BCS-48V3.5mm Manual

21 December 2024
SMK-Link

SMK-Link VP3700 Manual

17 December 2024
Metronic

Metronic ZAP 2 Unic - 495399 Manual

17 December 2024
Metronic

Metronic ZAP 3 - 495373 Manual

17 December 2024
Metronic

Metronic ZAP 3 - 495309 Manual

17 December 2024
Metronic

Metronic ZAP 3 - 495308 Manual

17 December 2024
Metronic

Metronic 495390 Manual

17 December 2024
Metronic

Metronic 495387 ZAP 3 Manual

17 December 2024
Metronic

Metronic ZAP 6 Manual

17 December 2024
EQ-3

EQ-3 HM-RC-19-B Manual

16 December 2024