Dri-Eaz F530 Manual


Læs nedenfor 📖 manual på dansk for Dri-Eaz F530 (1 sider) i kategorien Luftrenser. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
07 1916-0 C F530 1 Legend Brands, Inc.
Duct Attachment Kit
Installation Instructions
F530
LEGEND BRANDS, INC.
15180 Josh Wilson Road, Burlington, WA 98233
Phone: 800- -3030 Fax: 360- -7950 932 757 LegendBrandsRestoration.com
The Duct Attachment Kit allows the user to secure layat ducting to the process air
outlet of the Revolution LGR, CMC200 and PHD200 Compact Dehumidiers.
KIT INCLUDES
Four oset screws
Four nylon spacers
Four oversize retaining washers
Four small washers
Duct retention ring
Two 10 ft. lengths of 16 in. layat ducting
TOOLS REQUIRED
Phillips screwdriver or cordless drill with Phillips bit
Scissors
INSTALLING THE OFFSET SCREWS
Place the dehumidifier on a work bench or other
suitable location.
1. Remove one of the outlet grill retaining screws
and replace it with one of the oset screws
provided. Be sure to install the spacer and
washer in the correct sequence (Fig. A). Do not
overtighten.
2. Remove three remaining screws and replace
with oset screws.
INSTALLING THE DUCTING
3. Insert the end of the layat ducting provided through the inside of the metal ring until about 3 in. (6 cm)
of ducting protrudes. Fold the ducting back over the outside of the ring.
4. Place the duct ring inside one of the oset screws behind the oversize washer. Now gently squeeze the
duct ring just enough to t the ring side the remaining three oset screws and behind the oversize in
washers.
The duct attachment is now ready for use.
TIP: The oset screws may be left in place when not using the duct ring.
TIP: Do not use more than 10 ft. of ducting. Excessive ducting lengths will reduce airow and decrease
water removal performance.
IMPORTANT
Please refer to the dehumidier Owner’s Manual for important safety, operation and
maintenance instructions for your dehumidier equipment.
Fig. A Screws and ring installation detail. :
Replace 4 grill screws with
offset screws provided in
the kit.
Note correct placement
of spacers and washers
on each screw.


Produkt Specifikationer

Mærke: Dri-Eaz
Kategori: Luftrenser
Model: F530

Har du brug for hjælp?

Hvis du har brug for hjælp til Dri-Eaz F530 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Luftrenser Dri-Eaz Manualer

Dri-Eaz

Dri-Eaz F530 Manual

23 August 2024
Dri-Eaz

Dri-Eaz LGR 2800i Manual

17 August 2024

Luftrenser Manualer

Nyeste Luftrenser Manualer

Electrolux

Electrolux Flow A3 UV Manual

21 December 2024
Philips

Philips AC2891 Manual

21 December 2024
Philips

Philips AC9008/00 Manual

21 December 2024
Philips

Philips AC4005 Manual

21 December 2024
Philco

Philco Air 4 Manual

16 December 2024
Sharp

Sharp FU-888SV Manual

15 December 2024
Mitsubishi

Mitsubishi MA-83H-W Manual

14 December 2024