Dri-Eaz Velo F518 Manual

Dri-Eaz Heater Velo F518

Læs nedenfor 📖 manual på dansk for Dri-Eaz Velo F518 (1 sider) i kategorien Heater. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Owner’s Manual
Velo & Velo Pro HEPA Kit
Model F518
DRI-EAZ PRODUCTS, INC.
15180 Josh Wilson Road, Burlington, WA 98233, USA
Phone: 3030 7950+1 800 932- - Fax: +1 360 757- - www.dri-eaz.com
The HEPA Kit allows the Velo and Velo Pro to be used for general air scrubbing applications.
Patents: http://www.LBpatents.com
R E A D A N D S A V E T H E S E I N S T R U C T I O N S
NOTICE: Always operate the unit on a stable,
level surface so it cannot fall and cause injury.
WARNING! Do not alter or modify this product
in any way. Use only replacement parts
authorized by Dri-Eaz Products, Inc. Modifications or use of
unapproved parts could create a hazard and will void your
warranty. Contact your authorized Dri Eaz distributor for -
assistance.
Warranty registration
Please visit warranty.drieaz.com to register your purchase.
Registration allows us to better assist you with using, maintaining
or servicing your equipment and to contact you in case we have
important safety information concerning your Dri Eaz product. -
TIP: Retain the product box for convenient storage and
transport.
INSTALLATION INSTRUCTIONS
Follow the steps indicated below to install the HEPA attachment to
your Velo unit.
MAINTENANCE
Change Prefilter Cover whenever dust accumulation is visible.
Part ( F520 20 pack).
Change HEPA lter when airflow is noticeably reduced. Part F519
(1 pack).
Wipe off top and filter frame as needed.
FOR QUESTIONS, CALL YOUR LOCAL DISTRIBUTOR or contact the
Dri- - -Eaz Service Department at 800 932 3030.
2. Slide HEPA filter element
down over filter frame. Ensure
filter is centered over the Velo
air intake.
4. Place top over HEPA filter
assembly and tighten with
wingnut. This will lock the filter
assembly snugly to the
airmover. Do not overtighten.
3. Pull prefilter cover down
over HEPA filter element.
Fig. A: Installing the HEPA Kit
1. Center the filter frame over the
top of the impeller assembly. With
frame hooks in place under intake
grill, Rotate the frame clockwise
until the hooks fit under the intake
grill crossbars.
07 01888 518 2014 0425- B F -05 Warranty 07-0 1 -Dri Eaz Products, Inc.


Produkt Specifikationer

Mærke: Dri-Eaz
Kategori: Heater
Model: Velo F518

Har du brug for hjælp?

Hvis du har brug for hjælp til Dri-Eaz Velo F518 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Heater Dri-Eaz Manualer

Dri-Eaz

Dri-Eaz Velo F518 Manual

23 August 2024
Dri-Eaz

Dri-Eaz Dri-Pod Manual

16 August 2024
Dri-Eaz

Dri-Eaz Velo Manual

16 August 2024

Heater Manualer

Nyeste Heater Manualer

Ausclimate

Ausclimate ACCT155 Manual

18 September 2024
AEG

AEG VH 227 Manual

18 September 2024
Veito

Veito CH1200 LT Manual

18 September 2024
Harvia

Harvia Legend WL200 Manual

17 September 2024
Zephir

Zephir ZCRB1200 Manual

17 September 2024
Trumatic

Trumatic Combi 4 Manual

16 September 2024
Innoliving

Innoliving INN-576 Manual

16 September 2024