Dynaudio Xeo 2 Wall Mount Bracket Manual

Dynaudio højttalerstøtte Xeo 2 Wall Mount Bracket

Læs nedenfor 📖 manual på dansk for Dynaudio Xeo 2 Wall Mount Bracket (2 sider) i kategorien højttalerstøtte. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Owners Manual Wall Mount Bracket
Introduction
We thank you for choosing this quality wall-mount bracket which has been designed to work particularly well with the Dynaudio
compact loudspeaker models. The bracket has been designed to provide a very rigid and stable support, thus allowing the
speaker(s) to perform at optimum levels in a wide variety of positions. The unique curved shape adds strength to the mounting
assembly while also offering the exibility of both vertical and horizontal adjustment capabilities. Therefore the loudspeaker(s)
may be precisely angled to obtain the optimum listening axis in any room. The speakers will be mounted in place at a distance
within 6 cm of the wall boundary, and the mounting bracket will essentially be hidden behind the speaker cabinet.
Mounting surfaces
WARNING
Carefully evaluate the composition, construction and strength of the sur face you are mounting to. Take care to avoid concealed
water (plumbing) and power (electric) supplies which may be located behind the desired mounting location(s).
Tools required
Spirit level
Power Drill
3 mm masonry drill bit
No2 Pozidriv screwdriver
Assembly/Installation
Before assembly you should check that the hardware kit
is complete. A complete kit consists of the following:
4 curved steel plates
8 wood screws
2 washers
1 wrench
2 bolts
2 nuts
First put the bold and the plain washer through the slot of the smaller curved plate. Then, screw the nut ush onto the bolt,
as shown in the picture at the right.
Next, drill the holes and attach the smaller plate concentric onto the speaker cabinet. The holes should measure 3mm in
diameter but shouldn’t be deeper than 15mm to prevent the screws of breaking through into the cabinet enclosure.
NOTE
Sometimes it is helpful to connect the loudspeaker cable before completing the assembly. The mounting bracket plate could be
positioned right above the terminals of the speaker(s).
Examples
Audience 42
Audience 42W Audience 42C
Audience 52


Produkt Specifikationer

Mærke: Dynaudio
Kategori: højttalerstøtte
Model: Xeo 2 Wall Mount Bracket

Har du brug for hjælp?

Hvis du har brug for hjælp til Dynaudio Xeo 2 Wall Mount Bracket stil et spørgsmål nedenfor, og andre brugere vil svare dig




højttalerstøtte Dynaudio Manualer

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Nedis

Nedis SPMT5750BK Manual

3 Oktober 2024
Vogel's

Vogel's Sound 4203 Manual

27 September 2024
Vogel's

Vogel's Sound 4201 Manual

13 September 2024
Extron

Extron SMK VRE 48 Manual

6 September 2024
Sanus

Sanus BSWM3IWP Manual

6 September 2024
Sanus

Sanus WSWM3IWP Manual

6 September 2024
Valcom

Valcom V-9915M Manual

6 September 2024
Valcom

Valcom V-9912M Manual

6 September 2024
Valcom

Valcom V-9910 Manual

6 September 2024
Valcom

Valcom V-9904M-5 Manual

6 September 2024