Edifier QD35 Manual

Edifier Højttaler QD35

Læs nedenfor 📖 manual på dansk for Edifier QD35 (7 sider) i kategorien Højttaler. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/7

English

Edifier Connect app

EN Important safety instruction

Excessively loud music may lead to hearing loss. Please keep the volume in a safe range.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Please read the instructions carefully. Keep it in safe place for future reference.

• Use only accessories approved by the manufacturer.

• Install the instrument properly by following the instructions in the device connection section.

• Using the product in a 0-35°C environment is recommended. Shipping and storing the product in a 0-35°C environment is

recommended.

• To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.

• Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing.

• Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).

• Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles

be placed on the product.

• Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric

shock.

• Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended).

• Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and

is oriented to the right direction.

• Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake.

• Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless

the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or

moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional

immediately.

• Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.

• Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral

solvent or clear water for cleaning.

• The product must be used at an altitude of lower than 2000m.

This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable

part inside. Take the product to an authorized service center for repair.

This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement.

For wireless product:

Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or

medical equipment.

2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near

automatic gates, automatic fire alarm system or other automated devices.

3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation

of the pacemaker or other medical devices.

This symbol indicates that the product is for indoor use only.

Power warning:

1. Place the product near the power outlet for easy use.

Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can be found

on the product plate.

3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time.

4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.

5. Product nameplate and safety warning labels on the housing or bottom of the product or power adaptor.

The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

NOTICE:

For the need of technical improvement and system upgrade, information contained herein may be subject to change from time

to time without prior notice.

Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly

different from actual product. If any difference is found, the actual product prevails.

Model: EDF286001

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

Tel: +852 2522 6989

Fax: +852 2522 1989

www.edifier.com

Printed in China

@Edifier_Global @Edifier_Global@Edifierglobal

For more information, please visit our website:

www.edifier.com

Manual

Speaker overview

Charge external devices

Note:

• Images are for illustrative purposes only and may differ from the actual product.

• For the need of technical improvement and system upgrade, information and specifications contained herein may be slightly

different from actual product. If any difference is found, the actual product prevails.

1. Scan the QR code for the app.

2. Install Edifier Connect app from Apple App Store or Google Play.

With this speaker, you can

• Listen to Hi-Res music by connecting with Bluetooth, USB cable, and 3.5mm AUX cable;

• Have splendid light effects to decorate your table and room;

• Charge your devices efficiently through USB-C and USB-A ports based on GaN power technology.

What’s in the box?

• Select or customize EQs;

• Select or customize light effects;

• Select the clock format and synchronize the clock with your smart device;

• Upgrade the firmware; and

• More functions.

Input: 100-240V~ 50/60Hz 1A

USB-C port only (35W max.):

5V 3A, 9V 3A, 12V 2.91A, 15V 2.33A, 20V 1.75A

USB-A port only (18W max.):

5V 2.4A, 9V 2A, 12V 1.5A

USB-C port and USB-A port simultaneously:

18W max. + 18W max.

Note:

• During charging, make sure that the power cable is properly connected and the main power button on the rear panel of this

speaker is switched to "ON".

• If the charging current is 3A, use a charging cable that supports the charging current of 4.5A or higher for efficient charging.

Connect your device to the USB-C port or USB-A port on the left panel of this speaker for charging.

Download Edifier Connect app

With this app, you can

Cannot connect to your Bluetooth device

• Make sure that the distance between this product and your Bluetooth speaker is less than 10 meters and

there are no obstacles between them.

• Make sure that no device is connected to this product through Bluetooth.

• Make sure that this product is in Bluetooth discovery mode. If not, manually switch it to this mode.

• Restart this product, enable Bluetooth function on your Bluetooth device, and then try again.

• Reset this product to factory settings and try again.

No sound

• Make sure that this product and your device is properly connected.

• Make sure that the correct audio input source is selected.

• Make sure that the playback is not paused.

• Make sure that this product and your device are not muted.

• Increase the volume of this product and your device.

No power

• Make sure that the power cable is properly connected.

• Make sure that the power supply is not disconnected.

• Make sure that the main power button on the rear panel is switched to "ON".

Noise coming from speakers

• EDIFIER speakers generate little noise, while the background noise of some audio devices are too high.

Please unplug audio cables and turn the volume up, if no sound can be heard at 1 meter away from the

speaker, then there is no problem with this product.

To learn more about EDIFIER, please visit www.edifier.com

For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section

titled Warranty Terms.

USA and Canada: service@edifier.ca

South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local

contact information.

Synchronize the clock

1. Connect the speaker to your smart device via Bluetooth.

2. Open Edifier Connect app and then enter the product page of QD35.

→ The speaker clock is synchronized with your device automatically.

• You can also use Edifier Connect app to synchronize the clock manually and set the clock format (go to

"Settings" in your Edifier Connect app).

Note: If the main power button on the rear panel is switched to "OFF" or the power supply is disconnected for 7

days, clock settings will be cleared.

Get the latest firmware

Upgrade the firmware when a version update notice appears in your Edifier Connect app. During upgrading, the

display screen will show the progress.

Note: Do not disconnect the power supply and Bluetooth connection during upgrading.

How to reset this speaker to factory settings?

In work mode, press and hold the " " button for 5s.

Note: After the speaker is reset, all settings and pairing records on the speaker will be cleared.

Know more about this speaker

Operating Instructions

Troubleshooting

Power Output:

Mid-Bass (25W) + Treble (15W)

Frequency Response: 60Hz-40kHz

Declaration for EU

Frequency Band: 2.402GHz ~ 2.480GHz

RF Power Output: ≤10 dBm (EIRP)

There is no restriction of use.

Specifications

QD35

In-House Bluetooth Speaker

Speaker

Cleaning cloth Sticker User manualPower cable 3.5mm AUX cable USB-A to USB-A cable

Connect the bundled power cable to this product and the

power outlet.

* This plug type is meant for illustration purpose only.

Connect to power

Power on/off

1. Power on: switch the main power button on the rear

panel to "ON".

Power off: switch the main power button to "OFF".

2. Switch between standby mode and work mode: press and

hold the " " button for 1.5s.

→ In standby mode, the light and display are off.

→ You can still charge your devices with this speaker in

standby mode.

1.5s

Light effects

Press the " " button to switch

light effects.

Rotate the " " button clockwise

or anti-clockwise to increase or decrease the

light brightness.

Switch audio input sources

Press the " " button to switch

audio input sources.

: Bluetooth streaming

: USB-A cable

: 3.5mm AUX cable

1. Switch the speaker to USB audio streaming mode.

2. Connect your computer to the USB-A port on the rear panel of the speaker with the bundled USB cable.

→ The driver for the built-in USB sound card will be installed automatically on your computer.

• For Mac users, select "EDIFIER QD35" as the audio output device on your computer.

3. Play audio and control the playback on your computer.

• You can also press the " " button to pause or resume the playback, and rotate the " " button

to adjust volume.

• In USB audio streaming mode, the speaker does not support volume sync. If need to adjust the volume, please separately

adjust the speaker volume and the computer volume.

• The following operating systems are supported: Windows 11, Windows 10, Windows 8, Windows 7, and macOS.

Connect with the USB cable

Switch EQs

Press the " " button twice to

switch EQs.

: Music mode

: Game mode

: Movie mode

: Customized EQ

Follow the steps below to stream music via Bluetooth.

1. Switch the speaker to Bluetooth mode.

2. Select "EDIFIER QD35" in your device setting to connect.

3. Pin code for connection is "0000" if needed.

4. Play audio and control the playback on your device.

• You can also press the " " button to pause or resume the playback, and rotate the " " button to

adjust volume.

• After it is switched to Bluetooth mode, it will automatically re-connect to the Bluetooth device connected last time.

• To connect to another Bluetooth device, press and hold the " " button for 1.5s in Bluetooth mode to switch

this speaker to Bluetooth discovery mode.

Note: To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP and AVRCP profiles.

Bluetooth connection

1. Switch the audio input source to the AUX cable.

2. Connect your device to the speaker with the bundled AUX cable.

3. Play audio and control the playback on your device.

• You can also rotate the " " button to adjust volume.

Connect with the AUX cable

BluetoothSettings

EDIFIER QD35

DEVICES

Bluetooth

2:12

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household

wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material resources.To return your used device, please use the return

and collection systems or contact the retailer where the product was purchased. They can take this product for

environmental safe recycling.

English

Produkt Specifikationer

Mærke:	Edifier
Kategori:	Højttaler
Model:	QD35

Har du brug for hjælp?

Hvis du har brug for hjælp til Edifier QD35 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Edifier Manualer

Edifier S880DB MKII Manual

2 November 2024

Edifier CX7 Manual

3 Oktober 2024

Edifier MR3 Manual

3 Oktober 2024

Edifier M60 Manual

3 Oktober 2024

Edifier M2290BT Manual

2 Oktober 2024

Edifier MP230 Manual

29 September 2024

Edifier E1100plus Manual

13 September 2024

Edifier R990BT Manual

3 September 2024

Edifier Luna Eclipse e25 Manual

2 September 2024

Edifier D32 Manual

1 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Coastal Source EB102W710BN Manual

17 December 2024

Coastal Source B10SW8BN Manual

17 December 2024

Coastal Source EB82W6.5BN Manual

17 December 2024

NGS WILD Space 2 Manual

17 December 2024

Canton Chrono SL 520.2 Manual

16 December 2024

Canton GLE 456 Center Manual

16 December 2024

Canton Vento 820.2 Manual

16 December 2024

Canton Chrono SLS 780 DC Manual

16 December 2024

Canton In Wall 500 LCR Manual

16 December 2024

Canton InWall 949 LCR Manual

16 December 2024