Edifier S70DB Manual

Edifier Højttaler S70DB

Læs nedenfor 📖 manual på dansk for Edifier S70DB (2 sider) i kategorien Højttaler. Denne guide var nyttig for 42 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

Remote control

Wall mount bracket installation

Bluetooth operationBasic operation

Connection

S70DB Active Speaker System

Home Theatre/Home Entertainment/Lifestyle

1Drill hole on the wall

2Fix wall mount bracket on the wall

3Put the speaker onto the wall mount bracket

Note:

1. Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) function in optical/

coaxial mode.

2. The system does not support compression-format digital signal like Dolby and DTS etc, it will

automatically shut down the amplifier if input from those digital signals are detected.

1. Press in the "Master volume control" knob on the speaker or the corresponding audio source button on the

remote control to select audio source.

2. Play music and adjust to the comfortable volume.

AUX LINE IN Bluetooth OPTICAL COAXIAL

1. Press in the "Master volume control" knob on the speaker or “ ” button on the remote control to select Bluetooth

mode. The display window shows up Bluetooth mode.

2. Set your Bluetooth device (mobile phone, tablet etc.) to search and select “EDIFIER S70DB”.

3. PIN code for connection is “0000” if needed.

Note:

1. Bluetooth connectivity and compatibility may be different between different source devices, depending on the software

versions of source devices.

2. To enjoy all Bluetooth functions of this product, please ensure your mobile device has A2DP profile.

EDIFIER S50DB

Bluetooth

Align mounting bracket to the holes and use screws to attach wall mount bracket

Manual Edition 1.0, July 2017

IB-200-S0070D-00

NOTICE:

For the need of technical improvement and system upgrade,information contained herein may be subject to change

from time to time without prior notice.

Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may

be slightly different from actual product. If any difference is found, the actual product prevails.

Suit 2207, 22nd floor,

Tower II,Lippo centre,

89 Queensway

Hong Kong

Tel: +852 2522 6989

Fax: +852 2522 1989

www.edifier.com

Printed in China

Important safety instruction Important safety instruction

English

English 8

English

English 6

English

English 4

English

Troubleshooting

Problem Solution

• Check if the power indicator light is ON

• Try to turn up the volume using either the master volume

control or remote control.

• Ensure the audio cables are firmly connected and the

input is set correctly on the speakers.

• Check if there is a signal output from the audio source.

• Make sure the speaker is switched to Bluetooth input. If

it is in other audio input modes, Bluetooth will not connect.

Disconnect from any Bluetooth device by pressing and

holding the volume dial in Bluetooth mode, then try again.

• Effective Bluetooth transmission range is 10 meters;

please ensure that operation is within the range.

• Try another Bluetooth device for connection.

• Check if main power is connected, or if the wall outlet is

switched on.

No sound

Cannot connect via Bluetooth

The S70DB does not turn on

To learn more about EDIFIER, please visit www.edifier.com

For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the

section titled Warranty Terms.

USA and Canada: service@edifier.ca

South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local

contact information.

Specification

Power output: R/L (Treble): 12W+12W

R/L (Mid-range and bass): 32W+32W

SW: 70W

Frequency response: 45Hz~20KHz

Noise level: 25dB(A)≤

Sensitivity: AUX input: R/L: 400±50mV SW: 320±20mV

Line in input: R/L: 600±50mV SW: 450±20mV

OPT/COX input: R/L: 350±50mFFs SW: 220±20mFFs

Bluetooth input: R/L: 500±50mFFs SW: 420±20mFFs

Tweeter unit: ¾ inch (ø19mm)

Mid-range unit: 2 ¾ inch (70mm)

Bass unit: 8 inch (210mm)

Input type: AUX/Line in/Bluetooth/Optical/Coaxial

Frequency Band: 2.402GHz~2.480GHz

RF Power output: 20 dBm (EIRP)≤

There are no restrictions of use.

Unpack the box

1. Power ON/Standby

2. OPT/COX (press to switch OPT/COX input)

3. Bluetooth input(press and hold to disconnect Bluetooth)

4. Sound effect selection

Press to switch between MUSIC/MOVIE/NEWS

5. LINE IN input

6. AUX input

7. Bluetooth mode: previous track

Mute status: press and hold to show system software version

8. Volume up

9. Volume down

10. Bluetooth mode: press to play/pause

OPT/COX/LINE IN/AUX mode: press to mute

11. Bluetooth mode: next track

①

②

③

④

⑤

⑥

⑦⑧ ⑨ 10 11

Battery installation and replacement

Rotate the battery cover based on the arrow direction and remove, correctly install the

CR2025 battery into the battery compartment and close cover.

WARNING!

1. Don’t swallow the battery; danger of chemical burn.

2. The product includes a wafer battery. Swallowing this battery may lead to injury or death. Do not place the new or old

battery in where children can get to it.

3. Don’t use the product if the battery cover is missing or not closed, and keep the remote inaccessible to children.

4. Please go to the hospital immediately if the battery is swallowed.

Note:

1. Do not place the remote control in places that are hot and humid.

2. Do not charge the batteries.

3. Remove the batteries when unused for a long period of time.

4. The battery should not be exposed to excessive heat such as direct sun, fire or similar.

5. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Drill 4 holes (Depth: 40mm/1.5”, Hole size: 8mm/1/4”) in the wall using the wall mount bracket as a template,

then knock wall anchor into holes.

Note:

Hole’s dimension may vary depending on wall materials, please adjust drill size to existing conditions for proper

installation.

Please make sure all audio cable connections are secure before mounting the speaker.

Warning: please carefully follow installation instructions to avoid damage.

Bluetooth input

Illustrations

Pair the main speaker with the active subwoofer:

1. After the active subwoofer is powered on, turn on power switch and red LED blinks slowly.

2. Press the “Pair” button on the active subwoofer, red LED blinks quickly.

3. Press and hold the “PAIR” button on the main speaker.

4. When the red light is constantly lit, the connection is successful.

Box contents

Wall mount bracket

Speaker

Subwoofer

1 2 3 4 5

1. Pair button

2. Optical input

3. Coaxial input

4. Line in input

5. Auxiliary input

6. Display

7. Master volume control (rotate to adjust volume)

Audio source selection (press to switch AUX Line in Bluetooth OPT COX)→ → → →

Standby control (press and hold to Power ON/Standby)

System reset (press and hold to reset factory settings when showing system software versions)

8. Status indicator

9. Bass adjustment

10. Pair button

11. Power switch

12. Power cable connector

Aux InLine InCoaxialOPTPAIR

Fiber optic input audio cable

Power cable for subwoofer

3.5mm to RCA audio cable

3.5mm adapter audio cable

User manual

Remote control Screw p1-x4

Plastic wall anchor x4

This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable

part inside. Take the product to an authorized service center for repair.

Excessively loud music may lead to hearing loss. Please keep the volume in a safe range.

This symbol indicates that the product is for indoor use only.

This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement.

Correct Disposal of this product. This marking indicates that this product should not be disposed with other household

wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,

recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the

return and collection systems or contact the retailer where the product was purchased. They can take this product for

environmental safe recycling.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

1. Please read the instructions carefully. Keep it in safe place for future reference.

2. Use only accessories approved by the manufacturer.

3. Install the instrument properly by following the instructions in the device connection section.

4. Using the product in a 0-35 environment is recommended.℃

5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.

6. Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing.

7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat).

8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles

be placed on the product.

9. Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric

shock.

10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended).

11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and

is oriented to the right direction.

12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake.

13. Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless

the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or

moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional

immediately.

14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first.

15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral

solvent or clear water for cleaning.

Power warning:

1. Place the product near the power outlet.

2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can

be found on the product plate.

3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time.

4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution.

5. Safety warning labels on the housing or bottom of the product or power adaptor.

For wireless product:

1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or

medical equipment.

2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near

automatic gates, automatic fire alarm system or other automated devices.

3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation

of the pacemaker or other medical devices.

Products with grounding pin shall be connected to a power outlet with earth protection. For devices with detachable power

cord, the product can be easily disconnected from the wire coupler. For devices without detachable power cord, unplug the

product from wall socket to disconnect. For products equipped with all-pole mains switch, use the power switch as the

disconnection device.

Produkt Specifikationer

Mærke:	Edifier
Kategori:	Højttaler
Model:	S70DB
Bredde:	- mm
Dybde:	- mm
Højde:	- mm
Produktfarve:	Sort
Bluetooth:	Ja
FM radio:	Ingen
Udgangseffekt (RMS):	158 W
Equalizer:	Ja
Fjernbetjening inkluderet:	Ja
Frekvensområde:	55 - 20000 Hz
Forbindelsesteknologi:	Kabel & trådløs
AUX-indgang:	Ja
Signal/støjforhold:	85 dB
Line-in:	Ja
Diskant diameter:	13 mm
Mid-range driver diameter:	70 mm
Kampatibilitet med Apple-docking:	Ikke understøttet
Subwoofer RMS-effekt:	70 W
Subwoofer inkluderet:	Ja
Soundbar-højttaler RMS-effekt:	88 W
Subwoofer driver diameter (britisk):	8 "
Digital lyd koaksial indgang:	1
Digital akustisk og optisk indgang:	1
Subwoofer forbindelse:	Trådløs
Docking-stik type:	Ikke understøttet
Mid-range driver diameter (britisk mål):	2.75 "