Edimax HP-2002APn Manual

Edimax Adgangspunkt HP-2002APn

Læs nedenfor 📖 manual på dansk for Edimax HP-2002APn (59 sider) i kategorien Adgangspunkt. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/59

this publication may be reproduced, transmitted, transcribed, stored in a

retrieval system, or translated into any language or computer language, in any

form or by any means, electronic, mechanical, magnetic, optical, chemical,

manual or otherwise, without the prior written permission of this company

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any

software described in this manual is sold or licensed "as is". Should the

programs prove defective following their purchase, the buyer (and not this

company, its distributor, or its dealer) assumes the entire cost of all necessary

servicing, repair, and any incidental or consequential damages resulting from

any defect in the software. Further, this company reserves the right to revise

this publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly

different from those shown in this QIG. For more detailed information about

this product, please refer to the User Manual on the CD-ROM. The software

and specifications are subject to change without notice. Please visit our web

and product names mentioned in this manual are trademarks and/or

registered trademarks of their respective holders.

Notice according to GNU/GPL-Version 2

This product includes software that is subject to the GNU/GPL-Version 2.

You find the text of the license on the product cd/dvd. The program is free

software and distributed without any warranty of the author. We offer, valid

for at least three years, to give you, for a charge no more than the costs of

physically performing source distribution, a complete machine-readable

copy of the corresponding source code.

Please contact Edimax at: Edimax Technology co., Ltd, NO. 3, Wu-Chuan

3rd RD Wu-Ku-Industrial Park, Taipei Hsien, Taiwan. R.O.C., TEL :

+886-2-77396888, FAX : +886-2-77396887, sales@edimax.com.tw

1. Product Introduction

Thank you for purchasing and using Edimax HP-2002APn 200Mbps PowerLine

Ethernet Adapter with wireless Access Point. This device allows you to use

your home or office’s existing electrical wiring to create a network for multiple

computers to share files or connecting DVR, X-Box or Set-top Box device to

join the network.

Using the existing AC outlet, you can obtain greater flexibility in arrangement of

a new network with your existing wired or wireless network. No extra cost is

needed.

This product complies with the HomePlug AV mode and IEEE802.11b/g

(compatible with 1T1R 802.11n) wireless standards which providing up to

200Mbps / 150Mbps data transfer rate.

This product enables you to create a network easily and cost-effectively, it is a

good choice for you to create a new network or rearrangement of the existing

network.

Note :

14Mbps and 85Mbps Powerline devices (complies with HomePlug 1.0 and 1.1

standards ) can not connect with 200Mbps Powerline devices (complies with

HomePlug AV standard).

2. Product Package

This package contains the following components:

 One HP-2002APn PowerLine 200Mbps Ethernet Adapter

 One RJ-45 Cable (100cm)

 One Quick Installation Guide

 One CD-ROM (Including all the software utilities, drivers, Multi-languages

Quick Installation Guide and User’s Manual)

If any item is missing or damaged, please contact your local resellers for

service.

Note：CD-ROM with the management Utility could help you to manager all of

the HomePlug devices in the LAN. The Utility is not necessary when you use

the internet via HP-2002APn.

3. LED Definitions

LED

Indicator

Color Status Description

PWR Red On Power is on.

Green On The device runs normally.

- Off Power is off or the device is down.

WLAN Green On Radio switch is turned on.

Green Blink Data is being transmitted.

- Off Radio switch is shut off.

WPS Green On Connection succeeds under Wi-Fi

Protected Setup.

Green Blink Negotiation is in progress under Wi-Fi

Protected Setup.

- Off Wi-Fi Protected Setup is disabled.

PLC

Green On/Blink When PLC rate﹥100Mbps, see note 1

Orange On/Blink When PLC rate in 80-100Mbps, see note 1

Red On/Blink When PLC rate﹤100Mbps, see note 1

LAN Green On Connection succeeds.

Green Blink Data is being transmitted.

- Off No LAN connection.

Note: The PLC LED indicator turns “ON” when powerline link is detected. If the device is serving as a

STATION, the LED indicator will blink to indicate transmit or receive powerline activity. If the device is serving as a

CCO, the LED indicator will light steadily ON, even in the presence of powerline activity

4. Hardware Installation Procedure

1. Unpack the package and verify that all the items listed in the previous

section are provided.

2. Connect the HomePlug product to the device which you want to add to a

powerline network through the Ethernet cable.

3. Plug the HomePlug product to the power outlet.

4. This device with the HomePlug will join in the powerline network

automatically.

5. Buttons :

Reset: The Reset button can restore the factory defaults.

Group: The button is used to synchronous the private network name.

WPS: This button is used for enabling WPS PBC mode. If WPS is

enabled, press this button, and then the extender starts to accept

the negotiation of PBC mode

Note: Do not press the Reset button unless you want to clear the current settings. The Reset button is in a

small circular hole on the rear panel. If you want to restore the default settings, please press the Reset button gently

for 3 seconds with a fine needle inserted into the hole and then release the button. The system reboots and returns to

the factory defaults.

The following is the architecture of various applications of the HomePlug

products.

Picture 1 :

5. Software Installation Procedure

The Configuration Utility for Windows 98SE/Me/2000/XP/Vista enables the

users to identify HomePlug devices within the powerline network, measures

data rate performance, ensures privacy and performs diagnostics by setting

user defined secure powerline networks.

The Utility could help you to manager all of the HomePlug devices in the LAN.

The Utility is not necessary when you use the internet via HP-2002APn.

Please follow the procedures below to install the utility. Please note that the

following procedures are running in Windows XP, for other Windows operating

systems, the procedures are similar.

1. Click “ Setup Utility “ to install Utility .

Produkt Specifikationer

Mærke:	Edimax
Kategori:	Adgangspunkt
Model:	HP-2002APn
Vægt:	279 g
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	1
Strømforbrug (typisk):	7 W
Driftstemperatur (T-T):	0 - 40 °C
Ethernet LAN-datahastigheder:	10, 100 Mbit/s
Sikkerhedsalgoritmer:	64-bit WEP, 128-bit WEP, 256-bit WEP, AES, SSID, WPA, WPA2
Dimensioner (BxDxH):	110 x 50 x 108 mm
Servicekvalitet support (QoS):	Ja
LED-indikatorer:	Strøm
Effektkrav:	100-240V AC, 50/60 Hz
Kompatible operativsystemer:	Windows 98SE/ME/2000/XP/Vista/7
Trådløs rækkevidde:	300 m
Intern:	Ingen
Maksimal dataoverførselshastighed:	200 Mbit/s
Modulation:	BPSK, CCK, DBPSK, DQPSK, QPSK, ROBO
Maksimal driftstilstand:	300 m
Filtrering af MAC-adresser:	Ja
Overholdelse af branchestandarder:	802.11b/g, 802.11n
Forbindelses-LED'er:	Ja
Netværksfunktioner:	Ethernet
Understøttede protokoller:	IGMP V2
Dataoverførselshastighed:	0.2 Gbit/sek.
Understøttede dataoverførselshastigheder:	11/54/65/90 Mbps