Edy EDFO3902 Manual

Edy Ovn EDFO3902

Læs nedenfor 📖 manual på dansk for Edy EDFO3902 (110 sider) i kategorien Ovn. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/110

FREE STANDING OVEN

90x60 Gas & Electrical Oven

USER MANUAL GB

MANUEL D’INSTRUCTIONS FR

HANDLEIDING NL

BEDIENUNGSANLEITUNG DE

Dear User,

Our objective is to make this product provide you with the best

output which is manufactured in our modern facilities in a careful

working environment, in compliance with total quality concept.

Therefore, we suggest you to read the user manual carefully before

using the product and, keep it permanently at your disposal.

Note: This user manual is prepared for more than one model. Some

of the features specied in the Manual may not be available in your

appliance.

All our appliances are only for domestic use, not for commercial use.

* Mark the products as option.

“THIS APPLIANCE SHALL BE INSTALLED IN ACCORDANCE WITH THE

REGULA TIONS FORCE AND ONLY USED IN A WELL VENTILATED SPACE. READ

THE INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE”

“Conforms with the WEEE Regulations."

CONTENTS

Important Warnings 4

Introduction Of The Appliance 7

Important Warnings 8

Electrical Wiring Scheme 9

Gas Hose Passage Way 10

Chain Lashing Illustration 11

Installation Of Your Oven 11

Technical Features Of Your Oven 12

Reduced Gas Flow Rate Setting For Hob Taps 12

Reduced Flame Gas Cock Adjustment 13

Description Of Oven 13

Description Of The Control Panels 14

Using The Burner Groups 15

Using Hot Plates 16

Installation Of The Oven Feet 16

Using Oven Section 17

Cooking Time Table 18

Using The Grill Deector Sheet 19

Catalytic Walls 20

Chicken Roasting 20

Cleaning And Maintenance Of The

Oven’s Front Door Glass 21

Changing The Oven Lamp 21

Maintenance And Cleaning 22

Installation Of The Oven Door 23

Accesories 24

Removal Of The Lower And Upper Burner And

Installation Of The Injector To The Gas Oven 25

Injector, Gas Flow And Power Table 26

If Your Oven Does Not Operate 28

Environmentally-Friendly Disposal and

Package Information 28

IMPORTANT WARNINGS

1.WARNING: To avoid electrocution, ensure that the

electrical circuit of the product is open before replacing

the lamp.

2.WARNING:Before touching the connection terminals,

all supply circuit should be disconnected.

3.WARNING:While operating the grill, the reachable

sections can be hot. Keep the children away.

4.WARNING:Any inadvertent cooking made with fats and

oils can be dangerous and cause re.

5.WARNING:Risk of re; do not store the food materials

on the cooking surface.

6.WARNING:If the surface is cracked, unplug the device

to prevent any risk of electric shock.

7.WARNING:During usage the reachable sections can be

hot. Keep the small children away.

8.WARNING:The appliance and its reachable sections

become hot during usage.

9.The setting conditions of this appliance is indicated

on the label. (Or data tag)

10.This appliance is not connected to a combustion

product discharge system.This appliance shall be

connected and installed as per the applicable

installation legislation. Consider the requirements

related with ventilation.

11.Using a gas hob will release humidity and combus-

tion products in the room where it resides. Especially

during when the appliance in use, ensure that the kitch-

en is well ventilated and retain the natural ventilation

holes or install a mechanical ventilation system. (Hood

on top of the oven) Sustained usage of the appliance

may require additional ventilation. For example open-

ing a window or if available, increasing the ventilation

level of a mechanical ventilation system.

12.The reachable sections can become hot when the

grill is used. Keep the small children away.

13.WARNING:The appliance is intended for cooking only.

It must not be used for other purposes like room heating.

14.There are additional protective equipment to

prevent inadvertent touching to the oven doors. This

equipment should be installed if there are children.

15.“This appliance should be installed as per

regulations and in well-ventilated location only. Read

the instructions before installing or operating the

appliance.”

16.“Before placing the appliance check the local

conditions (gas type and gas pressure) and ensure

that the settings of the appliance is appropriate.”

17.“These instructions are applicable for countries of

which symbols are indicated on the appliance. If the

country symbol is not available on the appliance, in

order to adapt the appliance to the conditions of such

country, the technical instructions should be read.”

18.“Do not operate the system for more that 15

seconds. If the burner does not ignite at the end of

15 seconds stop the operation of the system and open

the section door and/or wait for at least 1 minute

before igniting the burner.

19.Do not use steam cleaners to clean the appliance.

20.Before opening the oven door clean the remnants

on it. Before closing the oven door, let it cool.

21.NEVER try to extinguish a re with water, rst

disconnect the mains supply and then using, for

example a lid or blanket, cover the re.

22.Do not use hard and abrasive cleaning agents or

hard metal scrapers to clean the oven door glass as

they may scratch and shatter the surface.

23.After placing a dish, ensure that the door is rmly

closed.

24.Unless continuous supervision is provided, the

children of age 8 or below should be kept away.

25.Pay attention for not to touch the heating elements.

26.This appliance can be used by children aged from

8 years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

INTRODUCTION OF THE APPLIANCE

3 4 5 6

1. Middle Burner

2. Middle Burner

3. Trivet

4. WOK Burner

5. Large Burner

6. Auxiliary Burner

7. Hot Plate

8. WOK Burner

17. Door

18. Handle

19. Lower Cabinet Door

20. Plastic Leg

21. Lamp

22. Grill

23. Chicken Roasting

24. Deep Tray

9. Glass Door

10. Control Panel

11. Led Lamp

12. Oven Control Knobs

13. Digital Timer

14. Hob Control Knobs

15. Wire Grill

16. Deep Tray

IMPORTANT WARNINGS

Electrical Connection and Security

1. Your oven requires 16 or 32 Ampere fuse according to the appliance’s

power. If necessary, installation by a qualied electrician is recommended.

2.Your oven is adjusted in compliance with 220-240V AC/380-415V

AC 50/60Hz.electric supply. If the mains are different from this specied

value, contact your authorized service.

3. Electrical connection of the oven should only be made by the sockets

with earth system installed in compliance with the regulations. If there

is no proper socket with earth system in the place where the oven will be

installed, immediately contact a qualied electrician. Manufacturer shall

never be responsible from the damages that will arise because of the

sockets connected to the appliance with no earth system.

4. Electrical cable should not touch the hot parts of the appliance.

5. For disconnection from the supply mains having a contact separation

in all poles that provide full disconnection, must be incorporated in xed

wiring in according with the wiring rules.

Gas Connection and Security

1. Before your appliance is connected to the gas supply, ensure that

the gas category and pressure specications shown in the data plate cor-

responds with your gas supply. If necessary call authorized service for

adjusting to gas category.

2. This appliance shall be installed in accordance with the regulations

in force and only used in a well ventilated space. Read the instructions

before installing or using this appliance. In the interest of safety this

appliances must be installed and / or serviced by a competent person as

stated in the gas safety regulations current editions.

3. The appliance must not be installed in a room without a window or

other controllable opening. If is installed in a room without a door which

opens directly to the outside, a permanent opening is required. The air

circulation should be 2 m3/h per kW of burners.

4. The gas connection should be performed from the right or left. For

this reason, change the hose nozzle, plug and the seals.

5. Please use exible hose for gas connection.

6. If you make a connection with a exible metal hose, locate a seal

between the main gas pipes.

7. The inner diameter of the exible hose, which the butane hose

nozzle is connected, should be 6mm for the house-type gas tubes. The

inner diameter of the exible hose, which the natural hose nozzle is

connected, should be 15mm.The hose should tightly be tted to the

hose nozzle by squeezing with a clamp. The hose should be replaced

before its last expiry date.

8. Caution! Make the oven connection to the gas inlet valve, the hose

length must be short and be sure that there is no leakage. The exible

hose used should not be longer than 125 cm for safety.

9. Re-inspect the gas connection.

10. When placing your oven to its location, ensure that it is at the

counter level. Bring it to the counter level by adjusting the feet if

necessary.

DO NOT MAKE GAS HOSE and ELECTRICAL CABLE OF YOUR OVEN GO

THROUGH THE HEATED AREAS, ESPECIALLY THROUGH THE REAR SIDE OF

THE OVEN. DO NOT MOVE GAS CONNECTED OVEN. SINCE THE FORCING

SHALL LOOSEN THE HOSE, GAS LEAKAGE MAY OCCUR.

ELECTRICAL WIRING SCHEME

220-240V~50/60Hz 220-240V~50/60Hz

400V 3N~50/60Hz 400V 2N~50/60Hz

Earth

Terre

Erdung

Earth

Terre

Erdung

Earth

Terre

Erdung

Earth

Terre

Erdung

Live

Phase

Neutral

Neutre Neutral

Neutre

H05 VV-F 3G 4mm² H05 VV-F 5G 1.5mm² H05 VV-F 4G 1.5mm² H05 VV-F 3G 1.5mm²

Neutral

Neutre

380-415V 3N~50/60Hz 380-415V 2N~50/60Hz

220-240V~50/60Hz 220-240V~50/60Hz

GAS HOSE PASSAGE WAY

1. Connect the appliance to the gas piping tap in shortest possible route

and in a way that ensure no gas leakage will occur.

2. In order to carry on a tightness and sealing safety check ensure that

the knobs on the control panel are closed and the gas cylindir is open.

3. While performing a gas leakage check, never use any kind of lighter,

match, cigarette or similar burning substance.

4. Apply soap bubble on the connection points. If there is any kind of

leakage then it will cause bubbling.

5. While inserting the appliance in place ensure that it is on the same

level with the worktop. If required adjust the legs inorder the make level

with the worktop.

6. Use the appliance on a level surface and in a well ventilated

environment.

Figure 1 Figure 2

CHAIN LASHING ILLUSTRATION

Before using the appliance, in

order to ensure safe use, be sure

to x the appliance to the wall

using thechain and hooked screw

supplied. Ensure that the hook is

screwed into the wall securely.

INSTALLATION OF YOUR OVEN

650mm min.

850 mm min.

900 mm min.20 mm 20 mm

TECHNICAL FEATURES OF YOUR OVEN

SPECIFICATIONS 90x60

Outer Width 900mm

Outer Depth 610mm

Outer Height 925mm

Lamp Power 15W

Bottom Heating Element 2000W

Top Heating Element 1500W

Grill Heating Element 2500W

Turbo Heating Element 1250W x 2

Supply Voltage 220-240V AC/380-415V AC 50/60Hz

Hotplate 145mm* 1000W

Hotplate 180mm* 1500W

Hotplate Rapid 145mm* 1500W

Hotplate Rapid 180mm* 2000W

REDUCED GAS FLOW RATE SETTING FOR HOB TAPS

1. Ignite the burner that is to be adjustment and

turn the knob to the reduced position.

2. Remove the knob from the gas tap.

3. Use an appropriately sized screwdriver to adjust

the ow rate adjustment screw. For LPG (Butane-Pro

pane) turn the screw clockwise. For the naturel gas,

you should turn the screw counter- clockwise once.

“The normal length of a straight ame in the

reduced position should be 6-7 mm.“

4. If the ame is higher then the desired

position, turn the screw clockwise. If it is smaller

turn anticolockwise.

5. For the last control, bring the burner both

to higt-ame and reduced positions and check

whether the ame is on or off.

Depending on the type of gas tap used in your

appliance the adjustment screw position may vary.

To adjust your oven acc. to the gas type, make the adjustment for reduced

ame carefully by turning with a small screwdriver as shown below on the screw

in the middle of the gas cocks as well as nozzle changes. (Figure 3 and 4)

Figure 3

Figure 4

Produkt Specifikationer

Mærke:	Edy
Kategori:	Ovn
Model:	EDFO3902

Har du brug for hjælp?

Hvis du har brug for hjælp til Edy EDFO3902 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ovn Edy Manualer

26 August 2024

26 August 2024

26 August 2024

26 August 2024

18 Juli 2024

Ovn Manualer

Nyeste Ovn Manualer

Bosch HBF134EB2 Manual

22 Marts 2025

Profilo F0TS113LBD Manual

21 Marts 2025

Profilo F0TSR13DBD Manual

21 Marts 2025

Profilo F0TS113DIL Manual

21 Marts 2025

Profilo FXSA243S Manual

21 Marts 2025

Profilo FRCA123B Manual

21 Marts 2025

Profilo FXSA243F Manual

21 Marts 2025

Profilo FRCA123I Manual

21 Marts 2025

Profilo FRMA234B Manual

21 Marts 2025

Profilo FXMA455C Manual

21 Marts 2025