Ei Electronics Ei129 Manual

Ei Electronics Ikke kategoriseret Ei129

Læs nedenfor 📖 manual på dansk for Ei Electronics Ei129 (6 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 35 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/6

Alarm Trigger Module

Connects to Sprinkler & EN54 Fire Systems (24V)

Instruction Manual

Contains vital information on the product’s operation and

installation. Read and retain carefully. If you are just installing

this product the manual MUST be given to the householder.

1. Introduction

The Ei129 is designed to sound interconnected Ei Electronics

Mains Powered Alarms to give a fire warning. When the

external normally open contacts connected to it, close.

Its main applications are:

1. To trigger the Smoke/Heat/Fire Alarms to sound when a

Sprinkler System is activated.

2. To trigger all the Smoke/Heat/Fire Alarms in an apartment

to sound when the EN54 Fire System in the common areas

of the HMO* sense fire. This greatly increases the alarm

sound level throughout the apartment (this helps meet the

recommendations of the BS5839-6: 2004 Clause 13.2e)

which requires 85dB(A) at each bedroom doorway. (It can

also help meet the recommendations of Clause 13.2f) of

75dB(A) at each bed head where the fire risk assessment

warrants it).

* HMO - House in Multiple Occupancy

2. Installation Instruction

2.1 Installation of Ei129 under Ei Electronics Easi-Fit Alarms.

WARNING: Mains powered Alarm Trigger Modules should be

installed by a qualified electrician in accordance with the

regulations for Electrical Installations published by the

Institution of Electrical Engineers (UK) (i.e. BS7671). Failure

to install the unit correctly may expose the user to shock or fire

hazards. This unit is not waterproof and must not be exposed

to dripping or splashing.

WARNING: First disconnect the mains from the circuit to be

used.

2.1.1 Choose a mounting position following the siting

instructions in the Smoke/Heat/Fire Alarm leaflet. Bring the

wiring from the external N/O contacts to this position. (With

an EN54 System an Input/Output Module is required and with

a Sprinkler System Changeover contacts should be specified

when it is being installed).

Model: Ei129

230V~ with

Battery Backup

A16697-R0-Ei129-UC-ENG 28/7/09 2:30 PM Page 1

Produkt Specifikationer

Mærke:	Ei Electronics
Kategori:	Ikke kategoriseret
Model:	Ei129
Højde:	25 mm
Vægt:	160 g
Produktfarve:	Hvid
Strøm:	0.025 A
Batteriteknologi:	Lithium
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Driftstemperatur (T-T):	0 - 40 °C
Certificering:	CE, BS EN 60065:2002/A1:2006
Strømforbrug (maks.):	0.5 W
Diameter:	141 mm
Indgangsspænding:	230 V
Genopladeligt batteri:	Ja
Indgangsfrekvens:	50 Hz
Kapabilitet:	Ei2110, Ei141, Ei144, Ei146, Ei161RC, Ei164RC, Ei166RC
Backup batteri:	Ja
Antal understøttede enheder:	12
Backup tid i standby tilstand:	12 måned(er)
Backup tid i alarm tilstand:	20 t