Electro-Voice RE420 Manual


Læs nedenfor 📖 manual på dansk for Electro-Voice RE420 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Electro-Voice | RE420 Condenser cardioid vocal
microphone
RE420 Condenser
cardioid vocal
microphone
Premium condenser element delivers a highly-
detailed, rich, and full bodied sound
Cardioid polar pattern provides excellent acoustic
isolation with a comfortable working range
Multi-stage pop filter minimizes breath blasts and
plosives
Selectable high-pass filter reduces undesirable low
frequency content when engaged
Vibration-absorbing internal shock mount minimizes
handling noise
The RE420 is a premium-grade, high-performance,
condenser cardioid vocal microphone. Designed to
reveal the exceptional detail and vivid clarity
synonymous with condenser elements, it skillfully
delivers the lyrical finesse required for expressive
vocal performances.
The sonic signature is rich, detailed and full-bodied,
with a warm and clear low end, natural and present
midrange, and an open, crisp and detailed high end.
The cardioid pattern provides excellent acoustic
isolation. Maximum feedback rejection occurs when a
stage monitor is positioned 180° off-axis to the
element. This pattern also allows for a comfortable
working range around the microphone making
expressive microphone techniques easy.
The multi-stage pop filter consists of two layers of
dense foam separated by air, which attenuates wind
velocity caused by breath and windblasts.
The high-pass filter has two positions (see drawing).
The flat position delivers the full frequency band pass
of the capsule. The high-pass position attenuates
frequencies below 150 Hz.
The internal shock mount isolates the microphone
element from vibration and guards against handling
noise.
Technical specifications
Element type: Self-biased condenser
Frequency response: 50 Hz-20 kHz (see chart)
Polar pattern: Cardioid
Sensitivity, open circuit
voltage, 1 kHz:
5.6 mV/Pascal
(-45 dBV/Pa)
Clipping (max SPL): 149 dB SPL (1% THD)
Self noise: 22 dB SPL "A" weighed (0 dB=20 μPa)
Dynamic range: 127 dB
Signal-to-Noise ratio: 72 dB
Output impedance: 200 ohms
Power requirements: 48 VDC phantom power
Polarity: Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3
Microphone connector: 3-pin, XLR-type
Finish: Black polyurethane paint
Materials: Zinc die cast, steel wire cloth grille


Produkt Specifikationer

Mærke: Electro-Voice
Kategori: Mikrofon
Model: RE420

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro-Voice RE420 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Electro-Voice Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

Sennheiser

Sennheiser A 9000 Manual

21 December 2024
Polsen

Polsen XP-2 Manual

19 December 2024
Sony

Sony DWT-P30 Manual

18 December 2024
BOYA

BOYA BY-M1000 Pro Manual

18 December 2024
PSC

PSC RF Multi SMA Manual

17 December 2024
PSC

PSC PowerStar RF Manual

17 December 2024
Hollyland

Hollyland LARK M1 Manual

16 December 2024
Power Dynamics

Power Dynamics PD210 Manual

16 December 2024
Vimar

Vimar 20586 Manual

15 December 2024