Electro-Voice RE520 Manual


Læs nedenfor 📖 manual på dansk for Electro-Voice RE520 (2 sider) i kategorien Mikrofon. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Electro-Voice | RE520 Condenser supercardioid vocal
microphone
RE520 Condenser
supercardioid vocal
microphone
Premium condenser element delivers a highly-
detailed, full, and vivid sound
Supercardioid polar pattern provides excellent
acoustic isolation and feedback control
Multi-stage pop filter minimizes breath blasts and
plosives
Selectable high-pass filter reduces undesirable low
frequency content when engaged
Vibration-absorbing internal shock mount minimizes
handling noise
The RE520 is a premium-grade, high-performance,
condenser supercardioid vocal microphone. Designed
to reveal the exceptional detail and vivid clarity
synonymous with condenser elements, it elegantly
delivers the lyrical finesse required for expressive
vocal performances, while controlling off-axis sound
from near-by sources.
The sonic signature is detailed, full and vivid, with a
warm and clear low end, natural and present
midrange, and an open, crisp and detailed high end.
The supercardioid pattern provides excellent acoustic
isolation. Maximum feedback rejection occurs when a
stage monitor position is at either 225° or 125° off-
axis to the element. This pattern also allows for a
cleaner mix due to its rejection of off-axis sound.
The multi-stage pop filter consists of two layers of
dense foam separated by air, which attenuates wind
velocity caused by breath and windblasts.
The high-pass filter has two positions (see drawing).
The flat position delivers the full frequency band pass
of the capsule. The high-pass position attenuates
frequencies below 150 Hz.
The internal shock mount isolates the microphone
element from vibration and guards against handling
noise.
Technical specifications
Element type: Self-biased condenser
Frequency response: 40 Hz-20 kHz (see chart)
Polar pattern: Supercardioid
Sensitivity, open circuit
voltage, 1 kHz:
5.6 mV/Pascal
(-45 dBV/Pa)
Clipping (max SPL): 150 dB SPL (1% THD)
Self noise: 17 dB SPL "A" weighed (0 dB=20 μPa)
Dynamic range: 133 dB
Signal-to-Noise ratio: 77 dB
Output impedance: 200 ohms
Power requirements: 48 VDC phantom power
Polarity: Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3
Microphone connector: 3-pin, XLR-type
Finish: Black polyurethane paint


Produkt Specifikationer

Mærke: Electro-Voice
Kategori: Mikrofon
Model: RE520

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro-Voice RE520 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Mikrofon Electro-Voice Manualer

Mikrofon Manualer

Nyeste Mikrofon Manualer

Elgato

Elgato Wave Panels Manual

16 November 2024
Warm Audio

Warm Audio WA-8000 Manual

15 November 2024
Pyle

Pyle PDWM3100 Manual

15 November 2024
Behringer

Behringer TM1 Manual

15 November 2024
Yamaha

Yamaha RM-WCH-8 Manual

14 November 2024
Yamaha

Yamaha RM-WOH Manual

14 November 2024
ORCA

ORCA OR-78 Manual

12 November 2024
Behringer

Behringer ECM PRO Manual

10 November 2024