Eliminator Lighting E137 Manual


Læs nedenfor 📖 manual på dansk for Eliminator Lighting E137 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
E 137 SPECIFICATIONS:
Model: E 137
Lamp: 4 x EL-R20 120V 50W
Weight: 6.5 lbs.
Size: 18.4”(L) x 6.4”(W) x 6.8”(H)
Fuse: 3 Amp
Supply Voltage: 120V
Working Position: Any Safe position
Duty Cycle: None
Colors: 4 Colors
Warranty: 1 Year Limited Warranty
CAUTION! Please read and
understand these instructions
before installing or operating
this unit.
Operating Instructions:
The E 137 is a simple, chasing, color wash for clubs
and djs. This unit features an internal microphone,
chase speed control, and sound sensitivity knob that
allows the beams to chase at your control. Turning
the knob in clockwise direction will make the unit
more sensitive to sound. The E 137s beams will
chase to the beat of the music. The E 137 is ready
to be hung or set on the ground in a safe position.
When mounting this unit to truss be sure to use a
clamp. Plug the unit in to a standard 110 wall outlet.
After plugging the unit in, turn the sound sensitiv-
ity knob 20°, and the chase speed knob can be in
any postiton. The fixture will then be in sound-active
mode, and will react to the beat of the music via the
internal microphone.
Lamp Replacement: Disconnect the units main
power supply. Unscrew and replace the bulbs that
need changing. Reconnect the power supply. Be
sure to follow all the handling instruction that are
included with your new lamp.
HALOGEN LAMP WARNING!
This fixture is fitted with halogen
lamps which are highly susceptible to
damage if improperly handled. Never
touch lamp with bare fingers as the
oil from your hands will shorten lamp
life. Also, never move the fixture until
the lamp has had ample time to cool.
Remember, lamps are not covered
under warranty conditions.
©Eliminator® Los Angeles, CA. - wwwEliminatorLighting.com
Caution! Never open unit when in use.
Always disconnect main power before
serving or replacing lamp. Remember to
always replace with the exact same type
lamp and fuse.


Produkt Specifikationer

Mærke: Eliminator Lighting
Kategori: Ikke kategoriseret
Model: E137

Har du brug for hjælp?

Hvis du har brug for hjælp til Eliminator Lighting E137 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Eliminator Lighting Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024