Epcom TT388M Manual


Læs nedenfor 📖 manual på dansk for Epcom TT388M (2 sider) i kategorien AV forlænger. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
1. Smart por table design, wonderful performance.
2. Highest resolution up to 1080p full HD.
3. Strong anti-interference ability by running at 5GHz operation frequency .
4. Support point to point configuration, one to many (1 to 2) configuration
and many to many (2 to 2, 2 to 1) configuration.
5. Support IR passback with 20-60KHz frequency.
6. Supports button control to set channels and IR contoller to switch and
choose input sources from receiver side.
7. 50m long range transmission distance.
· Package Contents
· Important Safety Notice
· Introduction
· Features
· Installation Requirement
· Panel Des cription
HDMI Extender TX
sender x1pcs
HDMI Extender RX
receiver x1pcs
DC5V/2A power
adapter x2pcs
IR blaster extension
cable x1pcs
IR receiver extension
cable x1pcs
User manual
x1pcs
This HDMI wireless extender includes transmitter unit and receiver unit,
allows to transmit and extend HDMI signal up to 50 meter s long away
wirelessly, it has strong anti-interference ability by running at 5GHz
operation frequency. This wireless extender not only suppor ts point to
point configuration, but also supports one to many (1 to 2) and many to
many (2 to 2, 2 to 1) configuration. This extender supports wide range IR
passback frequency 20-60KHz to realize remote control of source devices
from receiver side. With both button control and IR controller, makes
channel setting easily. It is really a very good solution for transmitting one
or more HDMI source signal to one or more screens in long distance
without running wires simultaneously, perfect for application of
conference, home entertainment and education etc.
Note:
1) Transmission distance will be different due to the environment.
2) Wall, brick or glass will shorte n the signal cover range or cause big
signal loss.
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDT V, and projector with HDMI port.
1. HDMI Extender TX sender
2.HDMI Extender RX receiver
Please read below safety instructions carefully before installation and
operation:
1. Please pay attention to all the warnings and hints on this device.
2. Do not expose this unit to rain, moisture and liquid.
3. Do not put any stuff into the device.
4. Do not repaire the device or open the enclosure without professional
person guidence to avoid electronic shock.
5. Make sure good ventilation openings to avoid product overheating
damage.
6. Shut off power and make sure environment is safe before installation.
7. Do not plug-in/out the network cables and IR cables when it is in using
to avoid cables damage.
8. Use DC5V only. Make sure the specification matched if using 3rd party
DC adapters.
IR blaster extension
cable interface
Connect with IR blaster extension cable. Please
put the IR blaster close to source device to
better transmit the IR signal from receiver
Connect with HDMI source device
HDMI input
Connect with DC5V/2A power adapter
Power input
Launch wireless signal
Antenna
HDMI signal indicator
Wireless connections
indicator
IR receiver extension
cable interface
Connect with IR receiver extension cable. Please
make sure the remote control is within the required
range of IR receiver
Connect with HDMI display deviceHDMI output
Connect with DC5V/2A power adapterPower input
Receive wireless signal
Antenna
Wireless connections
indicator
Data transmission
indicator
Led blinks slowly when it is building connection.
Led blinks fast when it is successfully connected
and transmitting data
HDMI signal input, it always on
Input CHANNEL
indicator
Indicate the input CHANNEL as a number, and
when the CHANNEL of transmitter as same as
the CHANNEL of receiver, wireless transmission
connected
It’on when the transmitter and the receiver
connect well with each other, other wise, it’off
It’on when the transmitter and the receiver
connect well with each other, other wise, it’off
1. Point to Point connection:
2. One to two connection:
Remote controller
×1pcs
HDMI display
HDMI display
HDMI display
3) It is recommended that the distance between each unit should be more
than 5 meters.
8
8
8
9
9
9
8 9
Digital control button
Digital control button
Display CHANNEL channel parameters
Display CHANNEL channel parameters
IR remote control
window
IR remote control
window
Receive IR remote control signal
Receive IR remote control signal
s
s
s
s
Output CHANNEL
indicator
Indicate the output CHANNEL as a number, and
when the CHANNEL of transmitter as same as
the CHANNEL of receiver, wireless transmission
connected


Produkt Specifikationer

Mærke: Epcom
Kategori: AV forlænger
Model: TT388M

Har du brug for hjælp?

Hvis du har brug for hjælp til Epcom TT388M stil et spørgsmål nedenfor, og andre brugere vil svare dig




AV forlænger Epcom Manualer

Epcom

Epcom TT388M Manual

29 August 2024
Epcom

Epcom TT744 Manual

29 August 2024
Epcom

Epcom TT-676 Manual

28 August 2024
Epcom

Epcom TT388-DM Manual

28 August 2024
Epcom

Epcom TT-108-PVR Manual

28 August 2024
Epcom

Epcom TT372EDID Manual

28 August 2024
Epcom

Epcom TT-688 Manual

28 August 2024
Epcom

Epcom TT388DONGLE Manual

28 August 2024

AV forlænger Manualer

Nyeste AV forlænger Manualer

ATen

ATen 2A-130G Manual

4 December 2024
Digitus

Digitus DN-95127-1 Manual

2 December 2024
Digitus

Digitus DN-651143 Manual

2 December 2024
Digitus

Digitus DA-70827 Manual

1 December 2024
Digitus

Digitus DA-70825 Manual

1 December 2024
Digitus

Digitus DA-70829 Manual

1 December 2024
Digitus

Digitus DA-70828 Manual

1 December 2024
Digitus

Digitus DN-95128-1 Manual

29 November 2024
Kramer

Kramer KDS-USB2 Manual

26 November 2024
Kramer

Kramer TP-580T Manual

26 November 2024