Equip Cat.6a Keystone Jack shielded LSA+ Manual

Equip Kabler til computere og periferiudstyr Cat.6a Keystone Jack shielded LSA+

Læs nedenfor 📖 manual på dansk for Equip Cat.6a Keystone Jack shielded LSA+ (1 sider) i kategorien Kabler til computere og periferiudstyr. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
2. Follow the color-coding to position T568A or T568B wiring.
T568A T568B
Pin 1 Pin 1White/Green White/Orange
Pin 2 Pin 2Green Orange
Pin 3 Pin 3White/Orange White/Green
Pin 4 Pin 4Blue Blue
Pin 5 Pin 5White/Blue White/Blue
Pin 6 Pin 6Orange Green
Pin 7 Pin 7White/Brown White/Brown
Pin 8 Pin 8Brown Brown
Cap
Cable tie
www.equip-info.net
1. Strip approximately 40mm of the cable jacket.
3. Follow the wiring sticker to place the wires into IDC slot.
Make sure to keep the pairs twisted as long as possible.
4. Punch the wires with a 110 or Krone impact tool and cut
off the surplus wires.
Unshielded Type:
5. Snap in the IDC cap to fix the wires, and finish the installation.
Shielded Type:
5. Tie up the cable by cable tie, and finish the installation.
40mm
Cat.6 Keystone Jack LSA+


Produkt Specifikationer

Mærke: Equip
Kategori: Kabler til computere og periferiudstyr
Model: Cat.6a Keystone Jack shielded LSA+

Har du brug for hjælp?

Hvis du har brug for hjælp til Equip Cat.6a Keystone Jack shielded LSA+ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Kabler til computere og periferiudstyr Equip Manualer

Kabler til computere og periferiudstyr Manualer

Nyeste Kabler til computere og periferiudstyr Manualer