Erica Synths Black Hole DSP II Manual

Erica Synths Ikke kategoriseret Black Hole DSP II

Læs nedenfor 📖 manual på dansk for Erica Synths Black Hole DSP II (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
OUT ROUT LDRY/WET CVIN RIN L
PATCH CVPARAM3 CVPARAM2 CVPARAM1 CV
BLACK HOLE DSP2
PARAM 1 PARAM 2 PARAM 3
IN LEVEL CRUSH CV LVL
CRUSH CV
PATC HCRUSH
BLACK HOLE DSP II
THANK YOU FOR CHOOSING ERICA
SYNTHS BLACK SERIES MODULE!
Erica Black Series include high-end,
unique functionality and superior quality
modules. Only the best, highest quality
components are used, all inputs and
outputs are protected against undesired
overvoltage. When designing Black
Series, we put design and usability
superior. Big knobs are assigned to key
functions of the module, which makes
Black Series ideal for live performances.
Enjoy!
If the doors of perception were cleansed
everything would appear to man as it is,
infinite.
/
William Blake
/
Erica Synths Black Hole DSP II , an
updated version of Black Hole DSP features
24 custom eects, designed in close
co-operation of Erica Synths team rider
KODEK and creator of Spin CAD software
Gary Worsham. Each eect has 3 manually
and CV controllable parameters, manual
and CV control over sampling frequency
for spanning from 48kHz to really Lo-Fi
crunchy sound and full analogue dry/
wet control. All eect parameter settings
can be saved to the memory and instantly
recalled with the eect, which makes Black
Hole DSP II ideal for live performances.
FEATURES:
24 custom eects based on Spin FV-1 chip
Stereo INs and OUTs
3 manually and CV controllable parameters
CV controlled eect select
Manually and CV controllable clock rate
reduction for noisy bitcrush
Eect settings memory
Full analogue Dry/Wet control
Audio clipping LED
The display shows currently selected eect.
The eect is activated by pushing the
PATCH encoder promptly, and a dot in the
bottom left corner will appear
this indicates that the eect is on.
When a Parameter knob returns to the
saved position, a dot will blink once.
The encoder
has several features.
Rotate the encoder to select
one of 24 eects.
Push the encoder promptly
to confirm the selection and
activate the eect.
Push and hold the encoder
to save (a display will indicate
SA) all parameter settings
with the eect!
To recall parameter settings,
push the encoder twice (the
display will indicate RC)
This is Crush CV attenuator
This is manual Dry/Wet
control. If you want to use
the Black Hole DSP II as
send eect unit make sure
you set this knob all way CW
(full wet)
These are CV inputs for
each parameter control.
Patches will change on very
slow CV rates only, as the
module requires some time to
read patch from the memory
TECHNICAL SPECIFICATIONS:
Input signal amplitude ...........-5…+5V (or 0…+10V)
Output signal amplitude........................-10V - +10V
Max sampling rate.........................................48kHz
CV level (full span).....................................-5V - +5V
Power consumption…....................+170mA, -56mA
Module width…………………….............................16HP
Module depth……….........................................35mm
These are audio signal
inputs. The Left input is
normaled to the Right, so
you can input mono signal
and get impressive
stereo eect
This is Dry/Wet CV input.
The module has full
analogue dry/wet
circuit
Use these potentiometers
to adjust the eect
parameters!
Refer to the table below for
parameter description!
All parameter settings can
be saved with the eect
(PATCH) and recalled
instantly. If you wish to alter
saved parameter settings,
rotate the potentiometer
until the segments in the
patch number screenash
oncethis means, you
have reached initial setting
of the parameter and you
start to altering it.
This is the input level
attenuator – make sure that
clipping LED is not lit
Clipping LED. Adjust the
input signal level so that
LED lights up accidentally
This is sample rate
knob. Turn it clockwise
to reduce clock rate and
get vintage tape echo
like eects and extreme
bitcrush
Signal outputs. All eects
are designed for stereo
outputs, but they sound
great also mono


Produkt Specifikationer

Mærke: Erica Synths
Kategori: Ikke kategoriseret
Model: Black Hole DSP II

Har du brug for hjælp?

Hvis du har brug for hjælp til Erica Synths Black Hole DSP II stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Erica Synths Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024
True

True TC900 Manual

28 December 2024