EXSYS EX-1302-2 Manual

EXSYS Kabler til pc'er og periferiudstyr EX-1302-2

Læs nedenfor 📖 manual på dansk for EXSYS EX-1302-2 (2 sider) i kategorien Kabler til pc'er og periferiudstyr. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

6 5

EX-

-1302

1302

1302-

-2

English

EX-

-1302

1302

1302-

-2

English

Die EX-1302-2 ist ein Modul zur Umsetzung von USB auf eine RS-232 Schnittstelle mit FIFO

16C550 Ports für den Anschluss von High Speed Seriellen RS-232 Peripherie Geräten (z.B.

Modem, Plotter usw.) Das USB Modul ist Hot Plug & Play fähig. Für die Einstellungen der I/O

Adressen und Interrupts sind keine Jumper und Einstellungen notwendig. Sie werden vom

System BIOS und beim installieren des Betriebssystems automatisch vorgenommen.

BESCHREIBUNG & TECHNISCHE DATEN:

AUFBAU:

Kompatibilität: USB 1.1 & 2.0 Anschluss

Betriebssysteme: WIN 98/ ME/ 2000/ XP/ Server 2003 & 2008/ Vista/ 7/ Linux/ MAC

Anschlüsse: 1x 9 Pin D-Sub Stecker, 1x USB A-Buchse

Lieferumfang: EX-1302-2, Treiber CD, Anleitung

Zertiﬁkate: / FCC / RoHS / WEEE DE97424562

DRIVER INSTALLATION:

JUMPER EINSTELLUNG & ANSCHLÜSSE :

USB A–Anschluss

S1: 9 Pin Stecker Seriell RS-232

Pin Signal Pin Signal Pin Signal

1 CDC 4 DTR 7 RTS

2 RXD 5 GROUND 8 CTS

3 TXD 6 DSR 9 RI

Seriell 9 Pin D-SUB Stecker (S1)

DB 9M:

USB A-Buchse:

USB 2.0 A-Buchse

Pin Signal Pin Signal

1 VCC 3 DATA+

2 DATA- 4 GND

Achtung!

Stecker nie umge-

kehrt oder mit

Gewalt einstecken.

Windows 98/ ME/ XP/ Server 2003 & 2008/ Vista/ 7 (32&64-bit):

Windows will recognize a new and open the hardware assistant. Please “USB Serial Device“

close the hardware assistant and open the following path on the driver CD:

“D:\USB_to_IO\USB_to_Serial\(32_64bit)Win7_XP_Vista_2008_2003_98_ME”.Now start the

ﬁle „PL2303_Proliﬁc_Driver Installer_V10626“ and follow the instructions of the setup pro-

gram till the end. Now please restart your PC. After booting Windows will recognize the device

automatically and install it. Follow the hardware assistant and ﬁnish the installation. Attention!

Restart Windows in any case after installing the drivers.

CHECK THE INSTALLED DRIVER:

Click at <> < then enter and click at . In the window that Start Run “compmgmt.msc“ >OK<

opens select Under you should ﬁnd one more >Device Manager<. ”Ports (COM and LPT)“

new as sample If you see this or similar entries the module is „USB Serial Port„ (COM5).

installed correctly.

INSTALL THE PERIPHERAL DEVICE:

The speed from the serial ports can be set to the maximum baud rate of 115.2Kbaud. Double

click select for example < There you can >Device manager< > USB Serial Port (COM5) .

select the diﬀerent settings of baud rate, stop/start-bits etc.

CHANGE PORT NUMBER (NOT WIN98 & ME):

If you like to change the port number for example COM3 to COM5, open the >Device Manager<

click at >COM3<, >Settings< and then >Advance<. There you can choose between COM3 up to

COM256.

Windows 2000:

Windows will recognize a new and open the hardware assistant. Please “USB Serial Device“

close the hardware assistant and open the following path on the driver CD:

“D:\USB_to_IO\USB_to_Serial\Win2000” “PL-2303 Driver Installer”.Now star the ﬁle and

follow the instructions of the setup program till the end. Now please restart your PC. After

booting Windows will recognize the device automatically and install it. Follow the hardware

assistant and ﬁnish the installation. Restart Windows in any case after installing the Attention!

drivers.

CHECK THE INSTALLED DRIVER:

Click at <> < then enter and click at . In the window that Start Run “compmgmt.msc“ >OK<

opens select Under you should ﬁnd one more >Device Manager<. ”Ports (COM and LPT)“

new as sample If you see this or similar entries the module is „USB Serial Port„ (COM3).

installed correctly.

CHANGE PORT NUMBER:

If you like to change the port number for example COM3 to COM5, open the >Device Manager<

click at >COM3<, >Settings< and then >Advance<. There you can choose between COM3 up to

COM256.

Linux:

The drivers are located on the driver CD in the folder: .

“D:\USB_to_IO\USB_to_Serial\Linux“

They are supported by the most versions of Linux OS. Because each individual version of Linux

OS is diﬀerent, sadly we cant provide a installation instruction. Please refer to the installation

manual for IO ports from your Linux OS version!

MAC:

The drivers are located on the driver CD in the folder: .

“D:\USB_to_IO\USB_to_Serial\Mac_OS_X“ for MAC OS-X or: .

“D:\USB_to_IO\USB_to_Serial\Mac_OS_9_8“ for Mac OS 9 & Mac OS 8

They are supported by the most versions of MAC OS. Because each individual version of MAC

OS is diﬀerent, sadly we cant provide a installation instruction. Please refer to the installation

manual for IO ports from your MAC OS version !

Bedienungsanleitung

Vers. 1.0/ 03.09.12

HARDWARE INSTALLATION :

Beachten Sie bitte die folgenden Installationshinweise. Da es große Unterschiede zwischen PC‘s

gibt, können wir Ihnen nur eine generelle Anleitung zum Einbau der EX-1302-2 geben. Bei Unklar-

heiten halten Sie sich bitte an die Bedienungsanleitung Ihres Computersystems.

1. Verbinden Sie einfach das Ende (A-Stecker) des Kabels mit der USB A-Buchse an Ihrem PC.

CLEANING:

For cleaning please use only a dry ﬂuﬀ less cloth and remove the dirt with gently pres-

sure. In the area of the connectors please make sure that no ﬁbres from the cloth re-

main in the connectors. Attention! Never use a moist or wet cloth for cleaning!

Produkt Specifikationer

Mærke:	EXSYS
Kategori:	Kabler til pc'er og periferiudstyr
Model:	EX-1302-2
Vægt:	150 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 75 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	0 - 55 °C
Kabellængde:	1.8 m
Stik:	USB2.0 A, 9-pin RS-232
Stik køn:	Hanstik/Hanstik