FeiYu-Tech G4 Pro Manual

FeiYu-Tech Ikke kategoriseret G4 Pro

Læs nedenfor 📖 manual på dansk for FeiYu-Tech G4 Pro (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Remove the power switch cap, and

insert two 18350 batteries into the handle.

Attach the iPhone by the quick-release adapter,

and ensure it is secure.

Install the phoneInstall the batteries

18350 18350

1 2

Note: Please take off the protective casing of the

phone before installation.

Charger Rechargeable

Battery

Input: DC 5V

Output: DC 4.2V Type:18350

Weight：52 g

Weight：6 g

USB Cable

Heavy Counter-Weight

Light Counter-Weight

Weight：8 g

1mm Counter-Weight

USB Cable

Charger

18350

5V USB

Power Adapter

(Equipped by users)

Connect the Mini-USB

port of the USB cable with

the charger, and the USB

port with 5V USB power

adapter.

2. Accessories

3. User Guide

Use the heavy counter-weight,

attach the bottom of the phone to the

motor of tilting axis, as shown in the

picture.

Use the light counter-weight,

attach the bottom of the phone to

the motor of tilting axis.

9 mm

iPhone 5

iPhone 4

Light

0 mm

iPhone 6s

Light

1mm Counter-Weight 1mm Counter-Weight

0 mm

iPhone 6s Plus

Heavy

Adjust the phone position and install the counter-weight

How to install iPhone6s / 6

0 mm

iPhone 6

Light

0 mm

iPhone 6 Plus

Heavy

Use the light counter-weight, leave

distances of about 9mm between

the bottom of phone and the motor

of tilting axis, as shown in the picture .

How to install iPhone 5s / 5c / 5 / 4s / 4

How to install iPhone 6s Plus / 6 Plus

Power on / off

Power On: Single tap the function button, the gimbal shall be powered on after 2 seconds.

Power Off: Hold down the function button for three seconds to turn off the gimbal.

Attention: Turn the gimbal on after ensuring the phone is secure.

Attention !

!(1) Please install the iPhone before powering on the gimbal.

(2) Please turn off the power when not in use.

How to Charge

3-Axis Handheld Gimbal for iPhone

iPhone 6s Plus / 6s / 6 Plus / 6

iPhone 5s / 5C / 5 / 4s / 4

Instruction Manual

1. Product Overview

LED indicator light

Joystick

Tilting

Rolling

Panning

Function Button

( On/Off )

(Indicator light)

Function

Interface

Rolling Axis

Tilting Axis

Panning Axis

1/4 inch Screw Hole

When the red LED indicator light flashes

in use, it means the gimbal is out-of-order

LED status Explanation

Blue light flashes for three times

Blue light flashes twice

Blue light flashes once

Blue light keeps flashing

Full Power

Enough Power

Low Power

No Power

Weight 315g（not including batteries, phone, or counter-weight）

Heavy Counter-weight 52g Light Counter-weight 6g

Panning Increments 3°/s ~ 150°/s

Adaption iPhone 6s Plus / 6s / 6 Plus / 6 / 5c / 5s / 5 / 4s / 4

Usage time 4 Hours

Titling Increments 2°/s ~ 75°/s

Horizontal Panning Angle 360°

Vertical Titling Angle

Rolls Angle

320°

100°

G4 Pro 3-Axial handheld gimbal for iPhone is an excellent camera stabilizer, lightweight and portable.

Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.

The Company assumes no liability for any risks related to or resulting from the debug and use of this product

(including the direct, indirect or third-party losses).

For any unknown sources of using, we will not be at any services.

Feiyu Tech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.

D I S C L A I M E R

Attention

Please correctly assemble the gimbal in accordance with the diagram.

Please install the camera before powering on the gimbal.

Please charge the battery with the standard charger.

When the gimbal is not in use or placed on the table, please ensure it is powered off.

Please visit the official website of Feiyu Tech

to get related information: www.feiyu-tech.com

Scan and keep

an eye on FY

Tap button for six times for roll angle adjustment, the tilt and roll angle restore to the horizontal status. Under the roll

angle adjustment state, move the joystick to the left or to the right to adjust the roll angle, single tap again to save the

setting and exit after adjusting.

Rolling angle adjustment

After finished the , the rolling angle still not parallel to the horizontal surface, you can use the joystick

to adjust the rolling angle according to .

Adjusting steps:

5. Gimbal Horizontal Angle Adjustment

6. Parameters

Su ppo rt email: service@feiyu-t ech.com

( 1 ) After powering the gimbal on, hold down the function button for one second to enter standby mode, and the LED

indicator shall flash for three times;

( 2 ) Consecutively tap the function button for three times, LED indicator shall be always on, place the gimbal on a flat

surface and keep it stationary;

( 3 ) When the initialization is completed, the LED indicator will flash for three times.

When the initialization failed, the LED indicator will flash quickly, repeat step (2) & (3) to reinitialize.

Initialize the gimbalSTEP 1

STEP 2

STEP 1

The horizontal angle needs to be adjusted whenever the following situations happen to the gimbal, user can

adjust the horizontal angle by gimbal initialization and joystick.

（1）The tilt angle is not leveled with the horizontal surface.

（2）The roll angle is not parallel to the horizontal surface.

（3）Under lock mode, the panning angle drifts.

The phone stays in its current orientation. All panning, tilting and rolls are restricted.

Working Modes

Three working modes can be switches under inversion mode. After entering into the inversion mode, the

gimbal automatically switches to the panning mode.

Invert the gimbal, put the camera face down to capture the wonderful moments.

The gimbal can restore to the boot-up state by consecutively pressing the function button for three times

under inversion mode.

Inversion Mode

After the gimbal being powered on for eight seconds, pull the tilting axis to the desired angle under non

panning and tilting mode and wait for 0.5 second until the gimbal registers the new angle.

Manual Pulling Locking

Panning Mode

Reset the tilting axis of the gimbal to initial orientation and initial mode.

Reset

In standby model, keep the gimbal in power-up state, the motor stops working, the indicator light flashes

for three times, and single tap again to wake the gimbal.

Standby

The phone is allowed to pan left or right. Vertical tilts or rolls are restricted.

Panning and Tilting Mode

The phone is allowed to pan left or right and tilt up and down. Rolls are restricted.

Lock Mode

Other Functions

Reset the tilting axis of the gimbal to initial

orientation and initial mode.

Operation

Double tap

Single tap

LED status Mode / Status

Single flash

Double flashes

Function

Explanation

Panning Mode / Lock Mode

Panning and Tilting Mode

Panning mode

Panning and Tilting mode

Lock mode / Initialize the gimbal

Triple tap

Single tap to switch between panning mode and

lock mode

Under panning and tilting mode, single tap to switch

to lock mode

Always on

Inversion Mode

It is possible to switch to other modes under

inversion mode, triple tap again to exit inversion

mode and reset

Long press for 3 seconds

Power off

Quadruple tap

Flash quickly Rolling angle adjustment /

Initialization failure / Malfunction

Reset

Tap button for six times Please refer to“Gimbal Horizontal Angle Adjustment”

for operations

Single tap again to awake the gimbal, or triple tap

to initialize the gimbal

Rolling angle adjustment

Long press for 1 second

Standby

Three flashes Standby

Mode

Panning mode

Panning and

Tilting mode

Lock mode

Controllable

angle of joystick

Tilting angle

Uncontrollable

Tilting and

panning angle

Movement

of joystick

Up, Down

Uncontrollable

Up, Down, Left, Right

Operating Instructions of Function Button

Explanation of LED indicator status Explanation of joystick control

4. Operating

Realize other functions

Switch the working mode

Power on / Power off

Identify the current mode of the

gimbal by the indicator lights

Function Button

( Indicator Light ) Joystick

for

Direction

Control

Produkt Specifikationer

Mærke:	FeiYu-Tech
Kategori:	Ikke kategoriseret
Model:	G4 Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til FeiYu-Tech G4 Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret FeiYu-Tech Manualer

FeiYu-Tech G4 Plus Manual

29 August 2024

FeiYu-Tech G4 Pro Manual

29 August 2024

FeiYu-Tech WG Mini Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Xiaomi Mi Portable Photo Printer Paper Manual

16 November 2024

Scott AirFlex Junior Back Protector Manual

16 November 2024

StarTech.com P5Q4A-USB-CARD Manual

16 November 2024

Radial Engineering J48 Stereo Manual

16 November 2024

Neff Z8200X1 Manual

16 November 2024

Livoo DOS183 Manual

16 November 2024

Aqua Joe AJ-SPXN Manual

16 November 2024

Elgato Green Screen MT Manual

16 November 2024

Newline DV-18023H Manual

16 November 2024

Olivetti d-Color MF2000 Manual

16 November 2024