First Alert FESA5 Manual

First Alert Ikke kategoriseret FESA5

Læs nedenfor 📖 manual på dansk for First Alert FESA5 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
User’s Manual
Auto Fire Extinguishers
IMPORTANT! Please read carefully and save.
This user’s manual contains important information about your fire
extinguisher’s operation. If you are installing this fire extinguisher for
use by others, you must leave this manual—or a copy of it—with the
end user.
Read extinguisher label and the entire user’s manual carefully before
installing or using the unit. Make sure everyone in your household is
completely familiar with the operation of the extinguisher, and review
the instructions regularly. In an emergency, you will not have time to
read instructions.
IMPORTANT INFORMATION ABOUT
FIRE EXTINGUISHERS
NOTE: Be sure the extinguisher is rated to fight the type of fire most
likely to occur in the area you choose to install it. Since household fires
commonly start in the kitchen, you should always install an extinguisher
in the kitchen. For added security, you should also install additional
extinguishers in utility areas, and other living areas in your household.
Model FESA5 is rated 5-B:C. It is NOT rated to fight Class A fires.
READ BEFORE INSTALLING OR USING
THIS FIRE EXTINGUISHER!
Fire extinguishers are classified by fire type. The A, B and C
rating system defines the kinds of bur ning materials each fire
extinguisher is designed to fight. The numbers in front of the
A, B, or C indicate the rating for size of the fire the unit can
extinguish. Using the wrong type of fire extinguisher can do
more harm than good. Make sure you understand which fire
extinguisher to use on each class of fir e!
Class A rating: The agent/powder is suitable for
fighting small fires involving wood, paper, cloth,
rubber, and some plastics.
Class B rating: The agent/powder is suitable for
fighting small fires involving grease, oil, gasoline,
kerosene, and other flammable liquids.
Class C rating: The agent/powder is suitable for
fighting small fires in "live" electrical equipment.
WHERE TO INSTALL THIS EXTINGUISHER
This extinguisher is designed to be used in your car or other vehicle.
It has a special mounting bracket to keep the unit from discharging
accidentally. We recommend you mount the extinguisher to keep it
safe from puncture or other damage. Since not every vehicle can
accommodate the mounting bracket, the bracket is also designed
to keep the extinguisher from rolling if you do not mount it.
HOW TO INSTALL THIS EXTINGUISHER
NOTE: Since surface types vary, mounting screws are not included.
Purchase screws or bolts specifically designed for the surface on
which you will mount the fire extinguisher. The fire extinguisher label
lists its maximum weight.
Installing the Mounting Bracket in a Vehicle
Remove mounting bracket from extinguisher by unlocking the clasp
and pulling the bracket away from the extinguisher. Use two strong
screws (such as #8 machine screws) to mount the bracket securely
onto metal or another solid surface that can support the weight of the
fire extinguisher. The mounting bracket must be secure so you can
remove the extinguisher quickly in an emergency.
1. Install the mounting bracket
as shown in “Installing The
Mounting Bracket” using strong
screws (such as #8 machine
screws) with washers and nuts.
The screws should not be
longer than necessary to
accommodate a washer and
nut. Mounting screws, washers,
and nuts are not included (see
Note above.)
2. After installing the mounting
bracket, replace the extinguisher
on the bracket with the nose
of the extinguisher pointing into
the bracket.
CHECKING AND INSPECTING
THE FIRE EXTINGUISHER
1. Inspect and test the extinguisher once a
week. Start by removing the extinguisher
from the mounting bracket/cap. Check
the extinguisher pressure by pressing the
green button on top of the cap as shown
in “Checking the Pressure.” If the button
pops back up, the extinguisher is properly
pressurized and ready to use. If the
button stays down, the extinguisher has
lost pressure and must be replaced.
2. Check for signs of damage or misuse.
Make sure you can still read all the text on
the label. Carefully examine the surface
of the extinguisher for corrosion. You can
help prevent corrosion by cleaning the
extinguisher if it gets wet or dirty. If you
notice corrosion during the warranty period, return the unit to
First Alert®(see "Limited Warranty" at the end of this manual).
3. Make sure the tamper indicator
(“safety seal”) is still intact as shown
in “Location Of The ‘Safety Seal’” and
the nozzle is clean and unobstructed.
4. When you finish inspecting the fire
extinguisher, always put it back into
the mounting bracket. Make sure the
handle is locked down and the safety
seal is intact.
For more information about fire extinguishers, consult the NFPA
Standard #10, “Portable Fire Extinguishers,” available from the
National Fire Protection Association, Inc., Batterymarch Park, Quincy,
MA 02169, USA.
• This extinguisher has a quick-release bracket for
m ounting. Mount the extinguisher as shown in “Installing
the Mounting Bracket.”
• Do not use sheet metal screws or wood screws; vehicle
vibrations may loosen them.
• Do not make holes in the vehicle structure if you are not sure
what is on the other side. You may accidentally cause severe
damage to electrical lines, gasoline lines or tanks, or other
vehicle systems.
• Do not break the plastic loop holding the safety pin in place!
This loop pr events accidental discharge of the fire
extinguisher. Break the loop only in an emergency before
using the fire extinguisher.
HOW TO OPERATE YOUR FIRE
EXTINGUISHER IN A FIRE EMERGENCY
TO FIGHT THE FIRE
If You Suspect a Vehicle Fire:
1. Pull vehicle over, away from all traffic.
2. Turn off vehicle engine.
3. Evacuate all passengers and move them a safe distance from the
vehicle. Do not plug a cellular phone into your own vehicle to call
the Fire Department.
4. Remove the extinguisher from the mounting bracket.
5. Hold the extinguisher firmly, with the nozzle
facing away from you. Pull out the pin to
break the ‘Safety Seal.’ You won’t be able to
squeeze the trigger until the safety seal is
removed.
6. Stand back 6 feet (2 meters) from the fire
and make sure the fire is not between you
and your exit.
7. Hold the extinguisher upright and aim the
nozzle at the base of the fire.
8. Press and hold the trigger to discharge the
powder.
9. Sweep the spray at the base of the burning
material, using quick side-to-side motions.
(If the spray scatters the fire, move back.)
10. Move slowly towards the fire as the
extinguisher spray pushes the fire back.
Maintain a 6-foot (2 meter) distance between
you and the front of the fire at all times.
11. Completely discharge the contents of the extinguisher and make
sure the fire is completely out. Flashbacks are common with fires.
AFTER THE FIRE IS EXTINGUISHED
Do not start the vehicle up or plug in any electrical accessories
(cellular phone, CD player, TV or VCR, etc.) until the vehicle has
been cleaned up completely. It is very important to remove the
powder from electrical equipment after a fire. If the powder gets
wet, it can conduct electricity. (Using a dr y chemical extinguisher
on wet electrical equipment can be hazardous for this reason.)
This may worsen an electrical leakage problem, impair the
equipment’s insulation, or create an electrical shock hazard.
If you think the fire had an electrical origin:
• Turn off the engine and do not touch any electrical wires,
fuses or accessories.
• Leave the vehicle and stay a safe distance away until the Fire
Department arrives.
• Do not restart the vehicle or plug in any electrical appliances or
accessories until a licensed mechanic has inspected the vehicle’s
electrical system.
• Make sure your extinguisher may be safely and effectively
used on the small fire you want to fight. Always use extreme
caution when fighting any fire. Fight a fire only where there is
a clear escape path to allow you to get out safely if the fire
gets worse.
• Avoid breathing smoke and heated fumes; stay low if
necessary. Burning materials will release toxic fumes.
Inhaling these fumes may cause injury or death.
• Always stand back far enough away from the fire—near
an exit—and make sure nothing is between you and your
escape route. If you get too close to a fire, you risk getting
burned or hit by splattering material like grease. If the fire
is too hot or smoky for you to get within 6 feet (2 meters),
DO NOT try to fight the fire yourself. Evacuate immediately
and call the Fire Department.
• For fires on a kitchen stove, turn oven or burners off
immediately if possible. If you can’t reach the oven or burner
controls safely, extinguish the fire first, then turn them off.
• Fight the fire from an upwind direction with your back to any
strong air current. Trying to fight a fire with currents blowing
towards you can result in serious injury.
IF YOUR EXTINGUISHER NEEDS SERVICE
This fire extinguisher is a disposable device that is NOT rechargeable.
Do not try to service or repair this fire extinguisher under any
circumstances. Do not try to remove the nozzle or valve assembly.
This is a pressurized device that can cause serious injury if
tampered with.
If there is a problem and it is still under warranty, please see “How to
Obtain Warranty Service” in the Limited Warranty.
DISPOSING OF A USED EXTINGUISHER
Completely discharge the extinguisher outdoors by turning the unit
upside down and pulling the trigger. Dispose of the empty unit
properly and replace it with a new fire extinguisher.
Never puncture, burn or expose this fire extinguisher to tempera-
tures over 150° F (66° C) even if it is fully discharged. The contents
are under pressure and it could explode.
LIMITED WARRANTY
BRK Brands, Inc. ("BRK") the maker of First Alert®brand products,
warrants that for a period of ten years from the date of purchase,
this product will be free from defects in material and workmanship.
BRK, at its option, will repair or replace this product or any component
of the product found to be defective during the warranty period.
Replacement will be made with a new or remanufactured product or
component. If the product is no longer available, replacement may
be made with a similar product of equal or greater value. This is your
exclusive warranty.
This warranty is valid for the original retail purchaser from the date of
initial retail purchase and is not transferable. Keep the original sales
receipt. Proof of purchase is required to obtain warranty performance.
BRK dealers, service centers, or retail stores selling BRK products do
not have the right to alter, modify or any way change the terms and
conditions of this warranty.
This warranty does not cover normal wear of parts or damage result-
ing from any of the following: negligent use or misuse of the product,
use on improper voltage or current, use contrary to the operating
instructions, disassembly, repair or alteration by anyone other than
BRK or an authorized service center. Further, the warranty does not
cover acts of God, such as fire, flood, hurricanes and tornadoes.
BRK shall not be liable for any incidental or consequential damages
caused by the breach of any express or implied warranty. Except
to the extent prohibited by applicable law, any implied warranty of
merchantability or fitness for a particular purpose is limited in duration
to the duration of the above warranty. Some states, provinces, or
jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages or limitations on how long an implied warranty
lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have
other rights that vary from state to state, or province to province.
How to Obtain Warranty Service
Service: If service is required, do not return the product to your
retailer. In order to obtain warranty service, contact the Consumer
Affairs Division at 1-800-323-9005, 7:30 AM to 5:00 PM, Central
Standard Time, Monday through Friday. To assist in serving you, please
have the model number and date of purchase available when calling.
Address: 25 Spur Drive, El Paso, TX 79906
Printed in Mexico M08-0039-007 M05/11
1 2 3 4
TABLE OF CONTENTS
Important Information About Fire Extinguishers . . . . . . . . . . . . . . .1
Read Before Installing or Using This Fire Extinguisher . . . . . . . . .1
Where to Install This Extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . .2
How to Install This Extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Checking and Inspecting the Fire Extinguisher . . . . . . . . . . . . . . .2
How to Operate Your Fire Extinguisher in a Fire Emergency . . . .3
After the Fire is Extinguished . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
How to Clean After Using a Fire Extinguisher . . . . . . . . . . . . . . . . .4
If Your Fire Extinguisher Needs Service . . . . . . . . . . . . . . . . . . . . . .4
Disposing of a Used Extinguisher . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
© 2011 BRK Brands, Inc. All rights reserved. Distributed by
BRK Brands, Inc., 3901 Liberty Street Road, Aurora, IL 60504-8122
Consumer Affairs: (800) 323-9005 • www.firstalert.com
Printed in Mexico
M08-0039-007 M05/11
• This extinguisher is designed for use against small fires
that have just started and ar e small enough to fight safely.
It is not designed to fight large fires that are burning out of
control. If the fire is too hot or smoky for you to get within
6 feet (2 meters) of it, do not try to fight it yourself. Warn
everyone, evacuate the premises, and have someone call
the Fire Department from outside the building. Trying to
fight a large fire yourself can result in injury or death.
• Do not puncture or burn any fire extinguisher. The contents
are under pressure, and the extinguisher could explode.
• Never locate this extinguisher close to an engine, stove or
other source of heat. It is pressurized and could rupture or
explode if exposed to temperatures over 150 ° F (66° C).
• This extinguisher contains a dry powder extinguishing agent.
The agent/powder is nontoxic, but can irritate skin. When using
this unit, avoid breathing the powder. Always ventilate the area
after use.
DO NOT CHECK THE PRESSURE OR TEST THE FIRE
EXTINGUISHER BY SQUEEZING THE TRIGGER, EVEN BRIEFLY.
ONCE USED IT WILL GRADUALLY LOSE PRESSURE AND WILL
NOT BE FULLY CHARGED FOR USE IN AN EMERGENCY.
First Alert®is a registered trademark of the First Alert Trust.
This Fire Extinguisher
may be mounted:
• In the trunk of a vehicle
• On an inside panel of
a vehicle
• On a clean, dry surface
where the temperature
does not go above 120° F
(49° C) or below –40° F
(–40° C)
Do NOT mount this
Fire Extinguisher:
• To the dashboard of the
vehicle
• To the exterior of a vehicle
• To the engine of a vehicle
• On or near any other
source of heat
Installing the
Mounting Bracket
HOW TO CLEAN AFTER USING A FIRE
EXTINGUISHER
NOTE: The powder spray from the extinguisher may spread over a
wide area, and may soil upholstery, carpets and walls.
• Sweep/vacuum up as much of the powder as possible. Then use
a damp cloth to wipe off the remaining agent.
• If you have any questions about cleaning appliances that the
agent has come into contact with, please contact the appliance
manufacturer.
Checking the
Pressure
Location of the
“Safety Seal”
• Turn off the engine immediately if you suspect a vehicle fire.
Evacuate the car, sending passengers a safe distance away.
If you see flames escaping from under the vehicle’s hood,
the fire is too large to fight. DO NOT attempt to open the
hood or fight the fire; instead move a safe distance from the
car and call for help immediately . Trying to fight this size fire
could result in injury or death.
• If there are no visible flames and you attempt to fight a
small fire, always use extreme caution if lifting your vehicle’s
hood. Flames may flash when you open the hood, which can
cause severe injury or death.
• This unit will not operate with mounting bracket attached.
The extinguisher must be removed from the mounting
bracket or it cannot discharge its contents to fight a fire.
Breaking the
Safety Seal
Press and Hold
Trigger To
Discharge Powder
Model FESA5
Tested to
ANSI/UL 711
and ANSI/UL 299

Produkt Specifikationer

Mærke: First Alert
Kategori: Ikke kategoriseret
Model: FESA5

Har du brug for hjælp?

Hvis du har brug for hjælp til First Alert FESA5 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret First Alert Manualer

First Alert

First Alert PRC700 Manual

9 September 2024
First Alert

First Alert EL52 Manual

1 September 2024
First Alert

First Alert SA511B Manual

26 August 2024
First Alert

First Alert KFE2S5 Manual

25 August 2024
First Alert

First Alert SCO500 Manual

25 August 2024
First Alert

First Alert FESA5 Manual

25 August 2024
First Alert

First Alert PIR725 Manual

25 August 2024
First Alert

First Alert WA100 Manual

25 August 2024
First Alert

First Alert SCO403 Manual

6 August 2024
First Alert

First Alert SA511CN2 Manual

4 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Atlona

Atlona AT-HD15SRS Manual

29 December 2024
Atlona

Atlona AT-DVIF30S-IR Manual

29 December 2024
Atlona

Atlona AT-PRO3HD66M Manual

29 December 2024
Atlona

Atlona AT-3GSDI500 Manual

29 December 2024
BlueBuilt

BlueBuilt BBMAG2M Manual

29 December 2024
Atlona

Atlona AT-3GSDI-14 Manual

28 December 2024
Atlona

Atlona AT-COMP10SS Manual

28 December 2024
Atlona

Atlona AT-2VGA300SL Manual

28 December 2024
Atlona

Atlona AT-HD-V216 Manual

28 December 2024
Atlona

Atlona AT-VGA11S Manual

28 December 2024