Flow Fitness BT4.0 Manual


Læs nedenfor 📖 manual på dansk for Flow Fitness BT4.0 (1 sider) i kategorien Pulsmåler. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Art. Code: FLO26003
heart rate transmitter strap is compatible with Bluetooth 4.0 devices. It
records your heart rate status including real-time and maximum heart rate during exercise and
show on receiving device.
1.Attach one end of the transmitter to the elastic strap.
2.Adjust the chest strap length to a suitable personal length and snug enough to stay in place during your workout.
3.Moisten the electrode areas of the strap. (as below picture)
4.Tie the strap around your chest, place transmitter below the chest and attach the other end to the elastic strap.
5.
Check that the wet electrode areas are firmly against your skin and that the logo of the transmitter is in a central, upright position.
Battery Replacement:
Step 1: Using a coin, open the battery cover by turning it counterclockwise to OPEN.
Step 2: Remove the battery .
Step 3: Insert the battery (CR2032) inside the cover with positive (+) side against the cover. Press the cover back into the connector.
Step 4: Use the coin to turn the cover clockwise to CLOSE.
How to wear the transmitter belt:
2PF29721010001X
2.1. 3. 4.
Pairing
When using the
Art. Code: FLO26003
for the first time, you need to pair the heart rate sensor with your receiving device according start up instructions.
Things to remember...
1.Move away (20M) from other sensors while receiving device is trying to pair with your transmier.
2.Keep the receiving device in front of you and ensure the transmission range within 2M from Art. Code: FLO26003 to the receiving device.
3.Please confirm Bluetooth 4.0 of your device is on.
Moisten the two electrode area on the reverse of the transmitter with water.
NOTE:
Keep the
Art. Code: FLO26003
transmitter strap in a cool and dry place to
maximize the heart rate sensor battery lifetime.
Never put the strap in a washing machine or dryer.


Produkt Specifikationer

Mærke: Flow Fitness
Kategori: Pulsmåler
Model: BT4.0

Har du brug for hjælp?

Hvis du har brug for hjælp til Flow Fitness BT4.0 stil et spørgsmål nedenfor, og andre brugere vil svare dig