Foscam FNA108H Manual


Læs nedenfor 📖 manual på dansk for Foscam FNA108H (3 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 126 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
65 7 8
1 2 3 4
V1.1
305503000893
WARNING
Before installing a hard disk drive (HDD), please make sure the power
is disconnected from the NVR.
It is recommended that a hard drive be used in 7200 high-speed or
above.
1. Remove the cover from the NVR by unfastening the screws on the
rear and bottom.
2. Connect one end of the data cable and power cable to the
motherboard of NVR and the other end to the HDD.
Procedure
1. lf you want to use Foscam VMS or App, the NVR needs to be connected
to a router.The NVR and IPC must be in the same LAN so that the IPC
can be searched to add to the NVR.
2. Connect your display to one of the video outputs (VGA or HD-OUT
interface).
3. Connect an external storage device to the USB interface of the NVR as
a backup.
4. Connect a mouse to the USB interface.
5. Some devices need to connect to your router using an Ethernet cable,
including the NVR, PC and IP Camera.
6. Connect the power adapter to the power input port.
7. The NVR DHCP server will open if it does not detect and connect a
router within the 30s, which is used for searching and connecting to
the IPC on the PoE NVR or switch.
Foscam cameras and NVRs require good security practices to
safeguard your privacy. You should regularly change your
camera or NVR password which is the combination of
numbers, letters and symbols.
You should update your camera or NVR regularly. Make sure
your camera or NVR has the latest rmware installed for your
specic model and better experience.
Quick Setup Guide
NVR
Screw Pack
DC Power Adapter
Ethernet Cable
Data Wire and Power Wire
of the Hard Drives
Warning Card
USB Mouse
Uncheck the checkbox
3. P2P. If you want to know the UID of the device, please scan
the QR code. If you don’t want to use the Setup Wizard
next time, uncheck the Setup Wizard checkbox. Click the
Finish button to complete the setup wizard.
or Right-click uncheck the Main Menu Conguration
Setup Wizard Finish checkbox. Click the button to complete the
setup wizard.
Power cable
HDD
Data cable
    
HD OUT Cable
ComputerRouter
Ethernet Cable
Ethernet
Cable
VGA Cable
Monitor
Mouse USB HDD
Ethernet
Cable
NVR Power Adapter
(DC 12V)
TV
Camera Power
Adapter (DC 12V)
NVR
4 Device Connection
Uncheck the checkbox
Download Foscam APP P2P
3. Place the HDD on the bottom of the device and then fasten the
screws on the bottom to x the HDD.
4. Re-install the cover of the NVR and fasten screws.
Package Contents
Security Warning
1 Before You Start 2 Hard Disk Installation
5 Log In
6 Setup Wizard
1. Turn on the power switch on the rear panel.
After the NVR starts up successfully, the power LED and HDD LED
indicators will turn green. The startup page is displayed on the
screen.
2. Change user name and password .
For your security, please set a new user name and password for your
NVR before Log In.
4. After modifying the password, you will be taken to the .Setup Wizard
7
Add IP Camera
You can add an IP Camera that is connected to the internet on the NVR.
3. Login page.
Enter the Username and Password, then click on the button.OK
*You need to set an inital user name and password for the first use.
*The maximum username lngth is 20, including numbers, letters and symbols:
_-@$*
*The password should be a combination of 6-12 numbers, letters, symbols.
Sybbols support: ~!@#%^*()_+{}:|<>?’-;\,./
3 NVR Rear Panel
Power Switch
GND
Power Input
(DC12V )
VGA Output
Audio Out
Network
HD-OUT
USB Port
Alarm Indicator
REC Indicator
Power Indicator
If a router is connected at this time, the NVR cannot be found when
adding it by APP or VMS, and the NVR needs to be restarted.
Remarks: Users can customize the startup time or close of the NVR
DHCP server.
For detailed manuals, tools, etc., please visit foscam.com/downloads.
The Setup Wizard can walk you through some important settings on
the NVR.
1. Setting the time.
2. Format HDD. Click the button to set up the HDD. Format
Note that this will delete all les on the HDD.
HDD Full Setting Select Stop Record and Overwrite . .
1. Right-click on main interface, select .Channel Cong
2. Select or your IP Camera Auto added IPC
3. Click Add.
4. Enter username and password of the camera. If your camera is in the
factory default state, you do not need to enter the user name and
password.
5. Click OK.
Kitchen
Garden
FOSCAM
FOSCAM
FOSCAM
Not Connected
Not Connected
Not Connected
192.168.1.100
192.168.1.107
192.168.1.109
XXXXXXXXX
XXXXXXXXX
XXXXXXXXX 1. Select Your IP Camera
2. Click Add
Select a protocol depending on which IP Camera you have.
FOSCAM protocol: The High Denition (HD) IP Cameras for Foscam.
ONVIF protocol: IP Cameras which support ONVIF protocol.
9
Auto Add Private IPC
Camera Name
Doorway
Bitrate Adaptive


Produkt Specifikationer

Mærke: Foscam
Kategori: Ikke kategoriseret
Model: FNA108H

Har du brug for hjælp?

Hvis du har brug for hjælp til Foscam FNA108H stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Foscam Manualer

Foscam

Foscam FN9108E-B4 Manual

24 August 2024
Foscam

Foscam FNA108HE Manual

24 August 2024
Foscam

Foscam FN9108HE Manual

24 August 2024
Foscam

Foscam T8EP Manual

24 August 2024
Foscam

Foscam T5EP Manual

24 August 2024
Foscam

Foscam FNA108H Manual

14 November 2023
Foscam

Foscam FN9108H Manual

19 September 2023

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sabrent

Sabrent AU-2X35 Manual

21 December 2024
Sabrent

Sabrent CB-RS232 Manual

21 December 2024
Protector

Protector AS-410 Manual

21 December 2024
Protector

Protector AS-6020.3 Manual

21 December 2024
Adder

Adder RED-PSU Manual

21 December 2024
Sungrow

Sungrow SC5000UD-MV Manual

21 December 2024
Linksys

Linksys Velop Pro 7 Manual

21 December 2024
Singer

Singer Momento Manual

21 December 2024