Fuji Finepix A 610 Manual

Fuji Digital kamera Finepix A 610

Læs nedenfor 📖 manual på dansk for Fuji Finepix A 610 (164 sider) i kategorien Digital kamera. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/164

OWNER’S MANUAL

This manual will show you how to use

your FUJIFILM DIGITAL CAMERA

FinePix A900/FinePix A825/FinePix

A820/FinePix A610/FinePix A800

correctly.

Please follow the instructions carefully.

Getting Ready

Using the Camera

Advanced Features • Photography

Settings

Camera Connection

Software

Installation

• Playback

•Movie

Appendices

Troubleshooting

BL00593-203(1)

Warning

To prevent fire or shock hazard, do not expose the unit to rain

or moisture.

For customers in the U.S.A.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

CAUTION

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void the user’s authority to operate

the equipment.

Notes on the Grant:

To comply with Part 15 of the FCC Rules, this product must be used

with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC

supply cord.

For customers in Canada

CAUTION

This Class B digital apparatus complies with Canadian ICES-003.

Please read the Safety Notes (➝p.158) and make

sure you understand them before using the camera.

IMPORTANT

NOTICE

BEFORE OPENING THE CD-ROM PROVIDED BY FUJIFILM

Corporation, PLEASE READ THIS END USER LICENSE AGREEMENT

CAREFULLY. ONLY IF YOU AGREE WITH THIS AGREEMENT,

SHOULD YOU USE THE SOFTWARE RECORDED ON THE CD-ROM.

BY OPENING THE PACKAGE, YOU ACCEPT AND AGREE TO BE

BOUND BY THIS AGREEMENT.

End User License Agreement

This End User License Agreement (“Agreement”) is an agreement between

FUJIFILM Corporation (“FUJIFILM”) and you, which sets forth the terms

and conditions of the license granted for you to use the software provided

by FUJIFILM.

The CD-ROM contains third party software. In case a separate agreement

is provided by a third party supplier for its software, the provisions of such

separate agreement shall apply to the use of such third party software,

prevailing over those of this Agreement.

1. Definitions.

(a) “Media” means the CD-ROM titled “Software for FinePix KA”- which

is provided to you together with this Agreement.

(b) “Software” means the software which is recorded on Media.

other related written materials which are provided to you together

with Media.

(d) “Product” means Media (including Software) and Documentation

collectively.

2. Use of Software.

FUJIFILM grants to you a nontransferable, nonexclusive license:

(a) to install one copy of Software onto one computer in binary machine

executable form;

(b) to use Software on the computer onto which Software is installed; and

3. Restrictions.

3.1 You shall not distribute, rent, lease or otherwise transfer all or any

part of Software, Media or Documentation to any third party without

FUJIFILM’s prior written consent. You also shall not sublicense,

assign or otherwise transfer all or any part of the rights granted to

you by FUJIFILM under this Agreement without FUJIFILM’s prior

written consent.

3.2 Except as expressly granted by FUJIFILM hereunder, you shall not

copy or reproduce all or any part of Software or Documentation.

3.3 You shall not modify, adapt or translate Software or Documentation.

You also shall not alter or remove copyright and other proprietary

notices that appear on or in Software or Documentation.

3.4 You shall not, or shall not have any third party, reverse-engineer,

decompile, or disassemble Software.

4. Ownership.

All copyrights and other proprietary rights to Software and Documentation are

owned and retained by FUJIFILM or the third party suppliers as indicated on

or in Software or Documentation. Nothing contained herein shall be

construed, expressly or implicitly, as transferring or granting any right, license,

or title to you other than those explicitly granted under this Agreement.

5. Limited Warranty.

FUJIFILM warrants to you that Media is free from any defect in material

and workmanship under normal use for ninety (90) days from the date

of your receipt of Media. Should Media not meet the foregoing warranty,

FUJIFILM shall replace such defective Media with other Media bearing

no defect. FUJIFILM’s entire liability and your sole and exclusive

remedy with regard to any defect in Media shall be expressly limited to

such FUJIFILM’s replacement of Media as provided herein

6. DISCLAIMER OF WARRANTY.

EXCEPT AS PROVIDED IN SECTION 5 HEREIN, FUJIFILM PROVIDES

PRODUCT “AS IS” AND WITHOUT WARRANTIES OF ANY KIND,

EXPRESS OR IMPLIED. FUJIFILM SHALL MAKE NO WARRANTY,

EXPRESS, IMPLIED OR STATUTORY, AS TO ANY OTHER MATTERS,

INCLUDING, BUT NOT LIMITED TO NON-INFRINGEMENT OF ANY

PROPRIETARY RIGHTS OF ANY THIRD PARTY, MERCHANTABILITY,

OR FITNESS FOR ANY PARTICULAR PURPOSE.

7. LIMITATION OF LIABILITY.

IN NO EVENT SHALL FUJIFILM HAVE ANY LIABILITY FOR ANY

GENERAL, SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL,

INCIDENTAL, OR OTHER DAMAGES (INCLUDING DAMAGES FOR

LOSS OF PROFITS OR LOST SAVINGS) INCURRED FROM THE

USE OF OR INABILITY TO USE PRODUCT EVEN IF FUJIFILM HAS

BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8. No export.

You acknowledge that neither Software nor any part thereof, will be

transferred, or exported to any country or used in any manner in violation

of any export control laws and regulations to which Software is subject.

9. Termination.

In case you breach any of the terms and conditions hereof, FUJIFILM

may immediately terminate this Agreement without any notice.

10. Term.

This Agreement is effective until the date when you cease to use

Software, unless earlier terminated in accordance with Section 9 hereof.

11. Obligation upon termination.

Upon termination or expiration of this Agreement, you shall, at your own

responsibility and expense, delete or destroy immediately all Software

(including its copies), Media and Documentation.

12. Governing Law.

This Agreement shall be governed by and construed in accordance with

laws of Japan.

Be sure to read this page before using the software.

EC Declaration of Conformity

Name: FUJIFILM Europe GmbH

Address: Heesenstrasse 31

40549 Dusseldorf, Germany

declare that the product

Product Name: FUJIFILM DIGITAL CAMERA FinePix A900/FinePix A825/FinePix A820/FinePix A610/FinePix A800

Manufacturer’s Name: FUJIFILM Corporation

Manufacturer’s Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,

TOKYO 107-0052, JAPAN

conforms to the following Standards:

Safety: EN60065

EMC: EN55022: 1998 Classe B

EN55024: 1998

EN61000-3-2: 1995 + A1: 1998 + A2: 1998

following the provision of the EMC Directive (89/336/EEC, 92/31/EEC) and Low Voltage Directive (2006/95/EC).

Dusseldorf, Germany

Place

May 1, 2007

This product comes with batteries. When these are empty, you shouldn’t throw them

away but deliver them as domestic chemical refuse.

Signature/Managing DirectorDate

Disposal of Electric and Electronic Equipment in Private Households

Disposal of used Electrical & Electronic Equipment (Applicable in the European Union and other European countries with

separate collection systems)

This symbol on the product, or in the manual and in the warranty, and/or on its packaging indicates that this

product shall not be treated as household waste.

Instead it should be taken to an applicable collection point for the recycling of electrical and electronic

equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences to

the environment and human health, which could otherwise be caused by inappropriate waste handling of this

product.

If your equipment contains easy removable batteries or accumulators please dispose these separately according to your local

requirements.

The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product,

please contact your local city office, your household waste disposal service or the shop where you have purchased the product.

In Countries outside the EU:

If you wish to discard this product, please contact your local authorities and ask for the correct way of disposal.

Contents

Warning................................................................. 2

IMPORTANT ......................................................... 3

EC Declaration of Conformity................................ 4

Disposal of Electric and Electronic Equipment

in Private Households...................................... 5

Contents................................................................ 6

Preface.................................................................. 8

About this Manual ............................................... 10

Accessories Included .......................................... 12

Camera Parts and Features (FinePix A610)....... 13

Camera Parts and Features

(except FinePix A610) ................................... 14

Example of LCD Monitor Text Display ................ 15

Getting Ready

Loading the Batteries .......................................... 16

Loading the Memory Card................................... 19

Turning On and Off ............................................. 22

Setting the language, date, and time .......... 23

Correcting the Date and Time ............................. 25

Selecting the Language ...................................... 26

Using the Camera

Taking Pictures (AUTO Mode) ............................ 27

Taking pictures with the focus and

exposure locked ....................................... 31

Adjusting the shot composition ................... 33

Viewing the Images............................................. 34

Erasing the Images/Movies ............................ 38

Using the erase button ( /n) .................... 38

Erasing the images using

Playback menu ........................................ 38

Advanced Features — Photography

Using the Photography Functions

— Procedure of Setting................................. 41

Setting the Shooting Mode (FinePix A610) ........ 43

Setting the Shooting Mode

(except FinePix A610)................................... 44

Shooting Mode ................................................... 46

e Macro (Close-up)........................................... 51

d Setting the Flash (Intelligent Flash)................ 52

* Self-Timer ...................................................... 54

j Increasing Monitor Brightness ...................... 56

Using SHOOTING MENU .................................. 57

Setting the SHOOTING MENU .................. 57

SHOOTING MENU............................................. 61

Changing the sensitivity setting ( ISO) ... 61

Changing the quality setting ( QUALITY)

... 62

Adjusting exposure compensation

( EXP. COMPENSATION) ................... 64

Adjusting color balance

( WHITE BALANCE) ............................ 65

Advanced Features — Playback

Using PLAYBACK MENU................................... 66

Setting the PLAYBACK MENU .................. 66

PLAYBACK MENU ............................................ 67

Sending and receiving images

( IR COMMUNICATION) (FinePix A900/

FinePix A825/FinePix A820 only) ............ 67

Setting automatic playback

( SLIDE SHOW) ................................... 71

DPOF set frame

( PRINT ORDER (DPOF)) .................... 71

Protecting the images ( PROTECT)........ 75

Copying the images ( COPY).................. 76

Rotating the images

( IMAGE ROTATE) ............................... 79

Trimming the images

( TRIMMING) (except FinePix A610) ... 80

Advanced Features — Movie

r Recording Movies .......................................... 82

Set the camera to r Movie mode

(FinePix A610) ......................................... 82

Set the camera to r Movie mode

(except FinePix A610) .............................. 82

Record movies ............................................ 83

w Playing Back Movies ..................................... 85

Settings

SET-UP.......................................................... 87

Using the SET-UP menu............................. 87

SET-UP menu option .................................. 88

Camera Connection

Connecting to a TV (FinePix A610)..................... 96

Connecting to a TV (except FinePix A610)......... 97

Connecting Camera Directly to Printer

— PictBridge Function ................................... 98

Software Installation

Installation on a Windows PC........................... 102

Installation on a Mac OS X............................... 105

Connecting to a PC .......................................... 108

Using FinePixViewer ................................ 112

Appendices

System Expansion Option ................................ 115

Accessories Guide ........................................... 116

Using Your Camera Correctly .......................... 118

Power Supply and Batteries ............................. 119

Discharging rechargeable batteries ......... 121

Notes on the xD-Picture Card™, the SD Memory

Card and the Internal Memory .................... 124

Warning Displays ............................................. 125

Troubleshooting

Troubleshooting................................................ 130

Specifications ................................................. 136

Explanation of Terms ..................................... 149

FUJIFILM Digital Camera Worldwide

Network..................................................... 150

Safety Notes................................................... 158

Usable Memory Cards

You can use the xD-Picture Card and the SD Memory Card

with the FinePix A900, FinePix A825, FinePix A820, FinePix

A610, and FinePix A800. In this Owner’s Manual, these cards

are expressed as “Memory Card”.

Preface

ZTest Shots Prior to Photography

For important photographs (such as weddings and

overseas trips), always take a test shot and view the

image to make sure that the camera is working normally.

• FUJIFILM Corporation cannot accept liability for any

incidental losses (such as the costs of photography or

the loss of income from photography) incurred as a

result of faults with this product.

ZNotes on Copyright

Images recorded using your digital camera system cannot

be used in ways that infringe copyright laws without the

consent of the owner, unless intended only for personal

use. Note that some restrictions apply to the

photographing of stage performances, entertainments

and exhibits, even when intended purely for personal use.

Users are also asked to note that the transfer of Memory

Card containing images or data protected under copyright

laws is only permissible within the restrictions imposed by

those copyright laws.

ZHandling Your Digital Camera

This camera contains precision electronic components.

To ensure that images are recorded correctly, do not

subject the camera to impact or shock while an image is

being recorded.

ZLiquid Crystal

If the LCD monitor is damaged, take particular care with

the liquid crystal in the monitor. If any of the following

situations arise, take the urgent action indicated.

• If liquid crystal comes in contact with your skin

Wipe the area with a cloth and then wash thoroughly

with soap and running water.

• If liquid crystal gets into your eye

Flush the affected eye with clean water for at least 15

minutes and then seek medical assistance.

• If liquid crystal is swallowed

Flush your mouth thoroughly with water. Drink large

quantities of water and induce vomiting. Then seek

medical assistance.

ZTrademark Information

• and xD-Picture Card™ are trademarks of

FUJIFILM Corporation.

• IBM PC/AT is a registered trademark of International

Business Machines Corp. of the U.S.A.

• Macintosh, Power Macintosh, iMac, PowerBook, iBook

and Mac OS are trademarks of Apple Inc., registered in

the U.S. and other countries.

• Microsoft, Windows, the Windows logo, Windows Vista

and the Windows Vista logo are trademarks or

registered trademarks of Microsoft Corporation in the

United States and/or other countries.

Windows is an abbreviated term referring to the

Microsoft® Windows® Operating System.

*The “Designed for Microsoft® Windows® XP” logo refers

to the camera and the driver only.

• IrSimple™ Trademark is owned by the Infrared Data

Association®.

• IrSS™ Trademark or IrSimpleShot™ Trademark is

owned by the Infrared Data Association®.

• SD logo is a trademark.

• Other company or product names are trademarks or

registered trademarks of the respective companies.

ZNotes on Electrical Interference

If the camera is to be used in hospitals or aircrafts, please

note that this camera may cause interference to other

equipment in the hospital or aircraft. For details, please

check with the applicable regulations.

ZExplanation of Color Television System

ZExif Print (Exif ver. 2.2)

Exif Print Format is a newly revised digital camera file

format that contains a variety of shooting information for

optimal printing.

*See “Using Your Camera Correctly” (➝p.118) for more

information.

NTSC: National Television System Committee, color

television telecasting specifications adopted

mainly in the U.S.A., Canada and Japan.

PAL: Phase Alternation by Line, a color television

system adopted mainly by European countries

and China.

About this Manual

ZUsable Memory Cards

You can use the xD-Picture Card and the SD Memory Card with the FinePix A900, FinePix A825, FinePix A820, FinePix A610,

and FinePix A800. In this Owner’s Manual, these cards are expressed as “Memory Card”.

ZAbout illustration

Illustrations in the Owner’s manual show the FinePix A800 as an example (FinePix A900, FinePix A825, FinePix A820, and

FinePix A610 operate similarly).

Up, down, left, and right are indicated by black triangles in the Owner’s Manual. Up or down is shown as n or o, and left or

right is shown as p or q.

Advanced Features — Photography

e Macro (Close-up)

Use this mode to take close-up shots.

Available Photography modes: s, AUTO,,,,

,, ( p.46, 48, 49, 50)

Press e (p) to select Macro mode.

Press e (p) again to cancel Macro mode.

CAUTION

, and are not available on the FinePix A610.

CHECK

• Focal range

Wide angle:

Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)

Telephoto:

Approx. 26 cm to 80 cm (10.2 in. to 2.6 ft.)

Wide angle:

Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)

Telephoto:

Approx. 35 cm to 80 cm (1.1 ft. to 2.6 ft.)

• Effective flash range

Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)

MEMO

• When setting or mode, the camera sets to

e Macro mode automatically.

• Use a tripod to prevent camera shake in Macro mode.

• Any of the following cancels Macro mode:

AUTO

e appears on the LCD

monitor indicating that you

can take close-up shots.

Icons indicate the modes that are available.

CAUTION

This mark denotes issues that may affect the

camera’s operation.

CHECK

This mark denotes points to notice in the

camera’s operation.

MEMO

This mark denotes additional topics that

complement the basic operating procedures.

When pressing q:

When pressing DISP/BACK:

ZAbout each model’s functions

This Owner’s Manual shows the description of 5 models: FinePix A900, FinePix A825, FinePix A820, FinePix A610, and

FinePix A800. Some functions are available only on one model. The main differences among the 5 models are shown in the

table below.

Check the table to confirm which functions your camera has.

The description of functions available only on certain models has a title as below.

FinePix A900

FinePix 825/FinePix 820

FinePix A610 FinePix A800

Mode dial (➝p.14) Available Available Not available Available

Shooting Mode ( , b,

, ) (➝p.46, 48) Available Available Not available Available

Number of recorded

pixels (➝p.62)

F/ N/%/[/3/

2/`

iF/iN/%/

4/2/`

5F/5N/%/

3/2/`

iF/iN/%/

4/2/`

Infrared transmission

function (➝p.67) Available Available Not available Not available

Trimming (➝p.80) Available Available Not available Available

Sound during movie

shooting (➝p.84) Available Available Not available Available

PLAYBACK MENU

Trimming the images

( TRIMMING)

(except FinePix A610)

Use this mode to trim the required part of the

photographed image.

1Select the menu.

2Specify trimming part of image.

APress w to set the camera to Playback

mode ( p.34).

BPress p or q to select the trimming

frame (file).

TRIMMING

YES CANCEL

TRIMMING

YES CANCEL

]

wide zoom

(Zoom out)

[

tele zoom

(Zoom in)

ASet the zoom switch to [

or ] to zoom in or out of

an image.

Zoom bar

Setting the menu ( p.66)

Indicating the model has this function.

Accessories Included

Make sure that all the below accessories are included.

Note that accessories may vary depending on model.

• AA-size Alkaline Batteries (LR6) (2)

•Strap (1)

• Video cable (1) (FinePix A610 only)

•A/V cable (1) (FinePix A900/FinePix A825/FinePix

A820/FinePix A800 only)

• USB cable (mini-B) (1)

•CD-ROM (1)

Software for FinePix KA

• Owner’s Manual (this manual) (1)

Attaching the strap

Attach the strap as shown in 1 and 2.

When attaching the strap, move the fastener to adjust the

length and slightly away from the end of the strap, as

shown in figure 1.

1 2

Camera Parts and Features (FinePix A610)

• Refer to the pages in parentheses for information on using the camera parts or features.

AShutter button

BZoom switch (p.28, 35)

CLens (Lens cover)

DPOWER button

EFlash (p.52)

F; USB socket (mini-B)

GVIDEO OUT (Video output) socket

(p.96)

HDC IN 3V (power input) socket (p.96)

ISelf-timer lamp (p.55)

JIndicator lamp (p.30)

KLCD monitor

LMENU/OK button

Mp/e Macro button (p.51)

NTripod mount

ODISP (Display)/BACK button (p.33, 34)

Pw (Playback) button

QStrap mount

Rn/j Low light view button (p.56)/

Erase button (p.38)

Sq/d Flash button (p.52)

To/* Self-timer button (p.54)

UBattery cover (p.16)

VMemory Card slot (p.19)

WBattery compartment (p.17)

Camera Parts and Features (except FinePix A610)

• Refer to the pages in parentheses for information on using the camera parts or features.

The following illustrations show the FinePix A900 as an example (FinePix A825, FinePix A820, and FinePix A800 operate

similarly).

AShutter button

BZoom switch (p.28, 35)

CMicrophone

DLens (Lens cover)

EPOWER button

FFlash (p.52)

GInfrared port (FinePix A900/FinePix

A825/FinePix A820 only) (p.67)

H; USB socket (mini-B)

IA/V OUT (Audio/Visual output) socket

(p.97)

JDC IN 3V (power input) socket (p.97)

KSelf-timer lamp (p.55)

LIndicator lamp (p.30)

MLCD monitor

NMENU/OK button

Op/e Macro button (p.51)

PSpeaker

QTripod mount

RMode dial

SDISP (Display)/BACK button (p.33, 34)

Tw (Playback) button

UStrap mount

Vn/j Low light view button (p.56)/

Erase button (p.38)

Wq/d Flash button (p.52)

Xo/* Self-timer button (p.54)

YBattery cover (p.16)

ZMemory Card slot (p.19)

!Battery compartment (p.17)

Example of LCD Monitor Text Display

*FinePix A800

ZPhotography mode

ZPlayback mode

FinePix A900/FinePix A825/FinePix A820/FinePix A610/FinePix A800 has internal memory that can store images without Memory

Card. Y appears on the LCD monitor when the internal memory is active.

A( Self-timer (p.54)

Be Macro (close-up) (p.51)

CC Flash (p.52)

Ds Photography mode (p.43,

44)

E Battery level indicator

(p.18)

FAF frame (p.29)

GDate/Time (p.23)

H9 White balance (p.65)

IiN Quality mode (p.62)

JNumber of available frames

(p.144-146)

KISO 100 Sensitivity (p.61)

L{ AF warning (p.125)

M| Camera shake warning

(p.125)

N Increasing monitor

brightness (p.56)

OY Internal memory (p.21)

PS Exposure compensation

(p.64)

Aw Playback mode (p.34)

Bu DPOF (p.71)

CF Protection (p.75)

DFrame number (p.90)

EPresent (p.34)

Loading the Batteries

Batteries are required to operate the digital camera. At

first, load the batteries in the camera.

ZCompatible batteries

AA-size alkaline batteries (2) or AA-size Ni-MH

rechargeable batteries (2) (sold separately)

CAUTION

• Never use the following types of

batteries, as they could cause

serious problems such as battery

fluid leakage or overheating:

1.Batteries with split or peeling

outer casings

2.Combinations of different types

of batteries or new and used batteries together

• Do not use manganese, Ni-Cd or lithium batteries.

• Use the same brand and grade AA-size alkaline

batteries as those supplied with the camera.

1Open the battery cover.

CHECK

Check that the camera is turned off before opening the

battery cover.

CAUTION

• Do not open the battery cover while the camera is on.

This could damage the Memory Card or ruin the image

files on the Memory Card.

• Do not apply force to the battery cover.

Outer casing

Getting Ready

2Load the batteries correctly as indicated by

the polarity icons.

CAUTION

Match the polarity icons (+ and ,) of the batteries to

those on the inside of the battery cover.

3Close the battery cover.

Loading the Batteries

Checking the battery charge

Turn the camera on and check the battery level indicator

on the LCD monitor.

AThere is ample battery charge. (Not displayed)

BThere is insufficient charge left in the batteries. The

batteries will soon run out. Have a new set of batteries

ready. (Lit red)

CThe batteries are depleted. The display will shortly go

blank and the camera will stop working. Replace or

recharge the batteries. (Blinking red)

CAUTION

• Soil, such as fingermarks on the poles of the batteries,

can shorten time for which the batteries can be used.

• The time for which AA-size alkaline batteries (referred

to hereafter simply as alkaline batteries) can be used

varies depending on the brand. Some brands of alkaline

batteries may stop providing power more quickly than

those supplied with the camera. Note also that due to

their nature, the time for which alkaline batteries can be

used decreases in cold conditions (0°C to +10°C/+32°F

to +50°F). For this reason, it is better to use AA-size Ni-

MH batteries.

• Due to the nature of the battery, the battery level

indicator ( , or V) may appear early when the

camera is used in cold locations. Try warming the

battery in your pocket or a similar location before use.

• Depending on the battery type and the level of charge

in the batteries, the camera may run out of power

without first displaying a battery level warning. This is

particularly likely to happen when batteries that have

run out of charge once are re-used.

• Depending on the camera mode, the transition from

to V may occur more quickly.

• See p.119-120 for information on the batteries.

• When first purchased or if left unused for a long period,

the amount of time which AA-size Ni-MH batteries can

be used may be short. See p.120 for more information.

• Battery power consumption varies greatly depending

on use. When you change to Playback mode from

Photography mode, may not occur, however,

V may suddenly blink red and the camera may stop

operation.

Getting Ready

Loading the Memory Card

Although you can store pictures in the camera’s internal

memory, you can store many more images on the

Memory Card (sold separately). You can use the xD-

Picture Card and the SD Memory Card with the FinePix

A900, FinePix A825, FinePix A820, FinePix A610, and

FinePix A800. In this Owner’s Manual, these cards are

expressed as “Memory Card”.

SD Memory Cards

Use of the SD Memory Cards listed below is

recommended. They are operation-checked at FUJIFILM

Corporation.

Maker: SanDisk

Model: Extremew-1GB/Ultrau-512MB, 1GB, 2GB

MEMO

• Compatible Memory Cards will be updated in our

website:

http://www.fujifilm.com/products/digital/

• Depending on the SD Memory Card, recording of

movies may be interrupted.

Use of above mentioned SD Memory Cards are

recommended.

• The camera is not compatible with multimedia cards.

1Open the battery cover.

2Insert a Memory Card.

(xD-Picture Card)

(SD Memory Card)

Continued Q

Gold marking

Gold contact area

Align the gold marking with the gold contact area,

then insert an xD-Picture Card completely.

Gold marking

Align the gold marking with the gold contact area,

then insert an SD Memory Card completely.

Gold contact area

Loading the Memory Card

CAUTION

Be sure to unlock the protection of the SD Memory Card

before inserting it. If it is locked, recording/deleting

images, as well as formatting are not available. To unlock

the protection, slide the switch back, and the SD Memory

Card will work normally.

CAUTION

• A new SD Memory Card or a card previously used on a

PC or any device other than the camera should be

formatted (➝p.93) on the camera before use.

• Do not use a miniSD adaptor or a microSD adaptor

which have exposed contact areas on the back. Use of

these adaptors may cause a malfunction or damage

due to the improper contacts.

3Close the battery cover.

How to replace the Memory Card

Push the Memory Card into the slot and then slowly remove

your finger. The lock is released and the Memory Card is

pushed out.

Protection

switch

Getting Ready

CAUTION

• When storing Memory Cards, make sure that they are

kept out of the reach of children. A Memory Card could

be swallowed and cause suffocation. If a child swallows

a Memory Card, seek medical attention or call

emergency number right away.

• If the Memory Card is oriented incorrectly, it will not go

all the way into the slot. Do not apply force when

inserting a Memory Card.

• Note that the Memory Card may spring out if you

release your finger quickly from the card immediately

after the lock is released.

• Operation of this camera is only guaranteed when it is

used with FUJIFILM xD-Picture Card and operation-

checked SD Memory Card (➝p.19).

• See p.124 for information on the xD-Picture Card, SD

Memory Card and the internal memory.

MEMO

• The size of an image file varies depending on the

subject. For this reason, the number recorded may not

represent the actual number of frames.

• See p.144-146 for information on the standard number

of available frames.

ZAbout internal memory

When a Memory Card (sold separately) is inserted

[Record images]: Record images to a Memory Card.

[Playback images]: Playback images in a Memory Card.

When a Memory Card (sold separately) is not inserted

[Record images]: Record images to internal memory.

[Playback images]: Playback images in internal memory.

ZAbout images in the internal memory

Images held in the camera’s internal memory may be

corrupted or erased due to problems such as camera

faults. Save your important data to another media (i.e.,

DVD-R, CD-R, CD-RW, hard disk, etc.).

It is possible to transfer saved images on the internal

memory to a Memory Card (➝p.76).

4NN

AUTO

FinePix A900/FinePix A825/

FinePix A820/FinePix A610/

FinePix A800 has internal

memory that can store

images without Memory

Card. Y appears on the

LCD monitor when internal

memory is active.

Turning On and Off

Turning the camera on in

Photography mode

Press POWER down fully to turn the camera on.

Press POWER again to turn the camera off.

MEMO

Changes between Photography mode and

Playback mode

Press w during shooting to change to Playback mode.

Press the shutter button down halfway to return to

Photography mode.

CAUTION

• The lens moves and the lens cover opens when turning

the camera on in Photography mode. Take care not to

obstruct the lens.

• Take care not to get fingerprints on the camera lens as

this will result in impaired image quality in your shots.

Turning the camera on in

Playback mode

Press w for about 1 second to turn the camera on in

Playback mode.

Press w during playback to turn the camera off.

MEMO

To change to Photography mode, press the shutter button

down halfway.

Getting Ready

Setting the language, date, and

time

When using the camera for the first time after purchasing,

the language, date, and time are cleared. Set the

language, date, and time.

1 screen appears when turning

the camera on.

2Set the date and time.

MEMO

• Holding down n or o changes the numbers

continuously.

• When the time displayed passes “12”, the AM/PM

setting changes.

Continued Q

APress n, o, p, or q to select the

language.

BPress MENU/OK to confirm the setting.

SET

START MENU

/ LANG.

APress p or q to select Year, Month,

Day, Hour, or Minute.

BPress n or o to correct the setting.

SET

DATE / TIME NOT SET

YY.MM.DD

1. 1 12:00

Turning On and Off

3Change the date format.

Date format

ex. April 26, 2007

YY.MM.DD: 2007.4.26

MM/DD/YY: 4/26/2007

DD.MM.YY: 26.4.2007

MEMO

START MENU screen also appears when the batteries

have been removed and the camera has been left for a

long period. Once the AC power adapter has been

connected or the batteries have been installed for 2 hours

or more, the camera settings will be retained for roughly 6

hours even if both sources of power are removed.

When the Auto power off function is active, if the camera

is left unused for 2 or 5 minutes, this function turns the

camera off (➝p.94). To turn the camera back on, press

POWER. To play back images, hold down w for about

1 second.

SET

4 / 26 / 2007 10:00

DATE / TIME NOT SET

DD . MM . YY

YY . MM . DD

MM /

DD /

APress p or q to select the date format.

BPress n or o to set the format.

CAlways press MENU/OK after the settings

are completed.

Auto power off function

Getting Ready

Correcting the Date and Time

1Open the SET-UP menu. 2Display the DATE/TIME screen.

APress MENU/OK to open the menu.

BPress n or o to select SET-UP.

CPress q.

SHOOTING MENU

ISO

QUALITY

AUTO

SET-UP

* FinePix A800

APress p or q to select .

BPress o to move to menu item.

CPress n or o to select DATE/TIME.

DPress q.

See “2 Set the date and time. ” (➝p.23).

SET

PLAYBACK VOLUME

LCD BRIGHTNESS

BEEP VOLUME

SHUTTER VOLUME

DATE / TIME

* FinePix A800

Using the Camera

Taking Pictures (AUTO Mode)

This section describes the basic operations.

1Turn the camera on.

APress POWER down fully to turn the camera on.

BSet the Mode dial to q (FinePix A900/FinePix A825/

FinePix A820/FinePix A800 only).

CAUTION

Step B is only for FinePix A900/FinePix A825/FinePix

A820/FinePix A800. Since there is no mode dial on

FinePix A610, ignore step B when using that model.

Holding the camera correctly

CAUTION

• Moving the camera while shooting gives a blurred

picture (camera shake). Hold the camera steadily with

both hands.

• If the lens or flash is obscured by your fingers or the

strap, subjects may be out of focus or the brightness

(exposure) of your shot may be incorrect.

• Check that the lens is clean. If it is dirty (getting

fingerprints on the lens etc.), clean the lens as informed

on p.118.

Continued Q

Brace your elbows

against your sides and

hold the camera with both

hands.

Do not cover the lens or

flash with your fingers.

Using the Camera

3Focus on the main subject in the AF frame

and press the shutter button down halfway.

CHECK

• Focus on the subject

Double beep is heard

Indicator lamp lit green

• Not focus on the subject

No sound

{ indicated

Indicator lamp blinking green

MEMO

The shutter button has a halfway point at which focus and

exposure are automatically optimized before taking the

picture by pressing fully down.

CAUTION

When pressing the shutter button halfway, a lens

operation sound may be heard.

4Press the shutter button fully.

CAUTION

When taking a picture using the flash, the image may

disappear and go dark briefly due to flash charging. The

indicator lamp blinks orange during charging.

CHECK

When using FinePix A610, the camera makes a beep

sound and takes the picture when you press the shutter

button down fully.

MEMO

• When the subject is not in the AF frame, use AF/AE lock

to take the picture (➝p.31).

• When pressing the shutter button down fully in one

motion, the camera takes the picture without the AF

frame changing.

Continued Q

AF frame AF frame

becomes smaller

and camera

focuses on the

subject.

Halfway

pressed

Click

Double

beep

Halfway pressed Fully pressed

Taking Pictures (AUTO Mode)

Flash

Change the flash mode when you want to take pictures without

flash. See p.52 for information on flash.

CAUTION

• The image shown on the LCD monitor before the

picture is taken may differ in brightness, color, etc. from

the image actually recorded. Play back the recorded

image to check it (➝p.34).

• When selecting a slow shutter speed that will cause

camera shake, | appears on the LCD monitor. Use

flash or a tripod.

• See p.125-129 for information on Warning displays.

See “Troubleshooting” (➝p.130-135) for more

information.

ZIndicator lamp display

The indicator lamp lights or blinks when pressing the

shutter button, etc. The indicator lamp shows the camera

status.

MEMO

Detailed warning messages appear on the LCD monitor

(➝p.125-129).

F4.2

250

F4.2

When pressing the shutter

button down halfway, b

appears on the LCD monitor

before the flash fires.

Display Status

Lit green Locking the focus

Blinking green Camera shake warning, AF warning,

or AE warning (ready to shoot)

Blinking green and

orange alternately

Recording to Memory Card or internal

memory (ready to shoot)

Lit orange Recording to Memory Card or internal

memory (not ready)

Blinking orange Charging flash (flash will not fire)

Blinking red • Warnings for Memory Card and

internal memory

Card not formatted, incorrect format,

memory full, Memory Card or

internal memory error

• Lens operation error

Indicator lamp

Using the Camera

Taking pictures with the focus

and exposure locked

In the above composition, the subjects (two people in this

case) are not in the AF frame. Pressing the shutter button

halfway at this point will result in the subjects being out of

focus.

AF/AE lock is useful:

Use AF/AE lock to guarantee best result when shooting a

subject that is not suited to autofocusing (➝p.32).

1Move the camera slightly so that one of the

subjects is in the AF frame.

2Press the shutter button down halfway to

focus on the subject.

Continued Q

Using AF/AE lock

F4.2

250

F4.2

Double

beep

Halfway

pressed

Taking Pictures (AUTO Mode)

3Continue to hold the shutter button down

halfway. Move the camera back to the

original image and press the shutter button

fully.

CHECK

When using FinePix A610, the camera makes a beep

sound and takes the picture when you press the shutter

button down fully.

MEMO

• AF/AE lock can be applied repeatedly before the shutter

is released.

• Use AF/AE lock in all Photography modes to guarantee

excellent results.

• On FinePix A900/FinePix A825/FinePix A820/FinePix

A610/FinePix A800, pressing the shutter button down

halfway locks the focus and exposure settings (AF and

AE lock).

Subjects not suitable for autofocus

FinePix A900/FinePix A825/FinePix A820/FinePix A610/

FinePix A800 uses a high-precision autofocusing mechanism.

However, it may have difficulty focusing on the following:

• Subjects photographed through glass

• Subjects that do not reflect well, such as hair or fur

• Subjects with no substance, such as smoke or flames

• Dark subjects

• Subjects with little or no contrast between the subject and

the background (such as subjects dressed in the same color

as the background)

• Shots where another high-contrast object (not the subject) is

close to the AF frame and is either closer or further away

than your subject (such as a shot of someone against a

background with strongly contrasting elements)

For such subjects use AF/AE lock (➝p.31).

F4.2

250

F4.2

Click

Fully pressed Very shiny subjects such

as a mirror or car body

Fast moving subjects

Using the Camera

Adjusting the shot composition

Select the LCD monitor display.

Press DISP/BACK to change the LCD monitor display.

Position the main subject at

the intersection of two lines

in this frame or align one of

the horizontal lines with the

horizon. Use this frame as a

guide to the subject’s size

and the balance of the shot

while composing a shot.

MEMO

Always use AF/AE lock when composing a shot. The

image may be out of focus if AF/AE lock is not used.

Text displayed No text displayed

Framing guideline

displayed

Best framing

Viewing the Images

Play back your images to check them. For important

photographs, always take a test shot and view the image

to make sure that the camera is working normally.

Setting the camera to Playback

mode

Press w during shooting to change to Playback mode.

When the camera is off, press w for about 1 second to

turn the camera on in Playback mode.

MEMO

• When pressing w, the last image shot appears on the

LCD monitor.

• When playing back images shot with a camera other

than FinePix A900/FinePix A825/FinePix A820/FinePix

A610/FinePix A800, a present icon appears on the

LCD monitor.

CAUTION

Still images viewable on FinePix A900/FinePix

A825/FinePix A820/FinePix A610/FinePix A800

This camera will display still images recorded on FinePix

A900/FinePix A825/FinePix A820/FinePix A610/FinePix

A800 or still images (excluding some uncompressed

images) recorded on any FUJIFILM digital camera that

supports xD-Picture Cards or SD Memory Cards. Clear

playback or playback zooming may not be possible for still

images shot on cameras other than FinePix A900/FinePix

A825/FinePix A820/FinePix A610/FinePix A800.

Select the LCD monitor display.

Press DISP/BACK during Playback mode to change the

LCD monitor display.

2007

1/12

F4.2

250

2233

250

F4.2

2 / 24 / 2007 10:00 AM

Text displayed No text displayed

Multi-frame playbackSorting by date

Using the Camera

Single-frame playback

1Zoom in / Zoom out.

To zoom in an image during single-frame playback:

2Display another part of the image.

To select the required image:

Press p: last image

Press q: next image

Selecting images

F4.2

250

2233

250

F4.2

ISO 100

100 - 0001

2 / 24 / 2007 10:00 AM

To select images on the

thumbnail lists screen, hold

down p or q for 1 second

during playback.

When releasing p or q,

camera returns to single-

frame playback.

Playback zoom

Press n, o, p, or q to display another

part of the image.

] wide zoom

(Zoom out)

[ tele zoom

(Zoom in)

Move the zoom switch to [ or

] to zoom in or out of an image.

Zoom bar

Navigation screen

(Current displayed

image)

Viewing the Images

ZZoom scales (FinePix A900)

ZZoom scales (FinePix A825/FinePix A820/FinePix

A800)

ZZoom scales (FinePix A610)

MEMO

Pressing DISP/BACK cancels playback zoom.

Multi-frame playback

Multi-frame playback screen (9 frames) appears on the

LCD monitor. Select required frame from the 9 frames.

Quality mode Max. zoom scale

(3488 × 2616 pixels) Approx. 5.5×

% (3696 × 2464 pixels) Approx. 5.8×

[ (2592 × 1944 pixels) Approx. 4.1×

3 (2048 × 1536 pixels) Approx. 3.2×

2 (1600 × 1200 pixels) Approx. 2.5×

Quality mode Max. zoom scale

i (3296 × 2472 pixels) Approx. 5.2×

% (3504 × 2336 pixels) Approx. 5.5×

4 (2304 × 1728 pixels) Approx. 3.6×

2 (1600 × 1200 pixels) Approx. 2.5×

Quality mode Max. zoom scale

5 (2848 × 2136 pixels) Approx. 4.5×

% (3024 × 2016 pixels) Approx. 4.7×

3 (2048 × 1536 pixels) Approx. 3.2×

2 (1600 × 1200 pixels) Approx. 2.5×

APress n, o, p, or q to move the cursor

(colored frame) to the selecting frame.

Press n or o repeatedly to jump to the

next page.

BPress MENU/OK to enlarge the image.

Using the Camera

Sorting by date

In sorting by date mode, you can view all images taken on

the same day.

APress n, o, p, or q to move the cursor

(colored frame) to the selecting frame.

BPress MENU/OK to enlarge the image.

2007

Selecting the date

APress n, o, p, or q to move the cursor

(colored frame) to on the upper left

frame.

BPress p to display the selecting date.

CPress n or o to move the cursor (colored

frame) to select the date.

Press n or o repeatedly to jump to the

next page.

DPress q.

2007

/24

Erasing the Images/Movies Setting the camera to w

Playback mode (➝p.34)

Use this mode to erase unnecessary images or movies to

have ample free space on the Memory Card or internal

memory. Your camera calls images “frames”.

Using the erase button ( /n)

Pressing (n) erases images easily.

Erasing the images using

Playback menu

APress p or q to select the erasing

image.

BPress (n).

CPress p or q to select OK.

DPress MENU/OK to erase the displayed

image.

ERASE OK?

SET

CANCEL

APress MENU/OK to open the PLAYBACK

MENU.

BPress n or o to select ERASE.

CPress q.

PLAYBACK MENU

ERASE

SLIDE SHOW

PRINT ORDER (DPOF )

PROTECT

COPY

* FinePix A800

Using the Camera

MEMO

To erase another frame (file), repeat above steps.

When erasing frames (files) is completed, press DISP/

BACK.

CAUTION

Pressing MENU/OK repeatedly erases consecutive

frames (files). Take care not to erase a frame (file) by

mistake.

Continued Q

DPress n or o to select FRAME or ALL

FRAMES.

EPress MENU/OK to confirm the setting.

PLAYBACK MENU

ERASE

SLIDE SHOW

PRINT ORDER (DPOF )

PROTECT

COPY

BACK

FRAME

ALL FRAMES

* FinePix A800

Erasing one frame at a time (FRAME)

APress p or q to select the erasing frame

(file).

BPress MENU/OK to erase the currently

displayed frame (file).

ERASE OK?

YES

CANCEL

Setting the camera to w Playback mode (➝p.34)

Erasing the Images/Movies

MEMO

• When using a Memory Card, the images in the Memory

Card are erased. When not using a Memory Card, the

images in the internal memory are erased.

• Selecting BACK returns to single-frame playback

without erasing any frames (files).

• Protected frames (files) cannot be erased. Unprotect

the frames (files) before erasing them (➝p.75).

• If “DPOF SPECIFIED. ERASE OK?” or “DPOF

SPECIFIED. ERASE ALL OK?” appears, press MENU/

OK again to erase the frames (files).

CAUTION

Erased frames (files) cannot be recovered. Back up

important frames (files) onto your PC or another media.

Erasing all frames (ALL FRAMES)

Press MENU/OK to erase all the frames

(files).

Press DISP/BACK to cancel

erasing of all the frames

(files). Some unprotected

frames (files) will be left

unerased.

ERASE ALL OK?

IT MAY TAKE A WHILE

YES

CANCEL

Setting the camera to w Playback mode (➝p.34) Erasing the Images/Movies

Advanced Features — Photography

Using the Photography Functions — Procedure of Setting

Specify the camera settings for taking pictures to get the

best result. A general guide is given below.

1Select the Photography mode.

Set the Photography mode.

The camera settings are tailored to the scene being

shot.

Note that the availability of a shooting mode and its

setting method may vary depending on the mode you

wish to use.

Set the photography mode in the shooting menu. See

p.43 for information on setting shooting mode.

<FinePix A900/FinePix A825/FinePix A820/FinePix

A800>

Set the photography mode using the mode dial. See p.44

for information on setting shooting mode.

Continued Q

This mode provides detailed settings that

are impossible to set in AUTO mode

(➝p.50).

AUTO This is the easiest mode for taking

pictures (➝p.46).

/m/,/./8/

/ ///

////

Select the best Shooting mode for the

scene being shot (➝p.46-50).

SHOOTING MENU

ISO

QUALITY

SET - UP

SHOOTING MODE

AUTO

AUTO This is the easiest mode for taking

pictures (➝p.46).

//b/

Select the best Shooting mode for the

scene being shot (➝p.46-47).

?(s/,/./

8////

////

// )

Select the best shooting mode for the

scene being shot from SCENE

POSITION in the SHOOTING MENU

(➝p.47-50).

Advanced Features — Photography

Setting the Shooting Mode (except FinePix A610)

You can select the most suitable setting according to the subject by selecting one of the Shooting modes.

Turn the mode dial and select the shooting mode.

Photography functions:

* q AUTO(➝p.46)

* BABY MODE (➝p.46)

* PICTURE STABILIZATION (➝p.46)

* b RED EYE REDUCTION(➝p.46)

* DIGITAL ZOOM(➝p.46)

* m PORTRAIT(➝p.47)

* ? Scene Position

CHECK

• See p.53 for information on available flash modes.

• When anything other than s in the SHOOTING

MODE is selected, only AUTO can be selected for the

ISO (sensitivity) setting.

ZSelecting Scene position setting (? Scene

Position)

You can choose from various types (,, ., 8, , ,

, , , , , , , , s) of scene.

Select the scene position setting in the SCENE

POSITION in the SHOOTING MENU.

See p.41 for information on the available .

ASet the Mode dial to ?.

Shooting Mode

Use this mode for taking

pictures in places such as

museum where the use of

flash and making an

operation sound and a

shutter sound are

restricted.

Flash mode is forcibly set

to Suppressed flash and

operation sound, shutter sound and the self-timer lamp

are off.

MEMO

Check whether photography is permitted before using this

mode.

Use this mode to shoot

documents and white

board.

It is effective for taking

clearer shots of letters.

CHECK

Focal range

Wide angle:

Approx. 10 cm to 2 m (3.9 in. to 6.6 ft.)

Telephoto:

Approx. 26 cm to 2 m (10.2 in. to 6.6 ft.)

Wide angle:

Approx. 10 cm to 2 m (3.9 in. to 6.6 ft.)

Telephoto:

Approx. 35 cm to 2 m (13.8 in. to 6.6 ft.)

Set the Photography functions to manual to easily control

yourself.

Photography functions:

• EXP. COMPENSATION (➝p.64)

• WHITE BALANCE (➝p.65)

MUSEUM

TEXT

s MANUAL

Setting the mode (➝p.43, 44)

Advanced Features — Photography

e Macro (Close-up)

Use this mode to take close-up shots.

Available Photography modes: s, AUTO, , , ,

, , (➝p.46, 48, 49, 50)

Press e (p) to select Macro mode.

Press e (p) again to cancel Macro mode.

CAUTION

, and are not available on the FinePix A610.

CHECK

• Focal range

Wide angle:

Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)

Telephoto:

Approx. 26 cm to 80 cm (10.2 in. to 2.6 ft.)

Wide angle:

Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)

Telephoto:

Approx. 35 cm to 80 cm (1.1 ft. to 2.6 ft.)

• Effective flash range

Approx. 30 cm to 80 cm (1.0 ft. to 2.6 ft.)

MEMO

• When setting or mode, the camera sets to

e Macro mode automatically.

• Use a tripod to prevent camera shake in Macro mode.

• Any of the following cancels Macro mode:

- Changing the Shooting mode setting

- Turning the camera off

AUTO

e appears on the LCD

monitor indicating that you

can take close-up shots.

Advanced Features — Photography

CAUTION

In bright scenes, overexposure may occur.

CHECK

Effective flash range ( : AUTO)

Wide-angle:

Approx. 60 cm to 3.9 m (2.0 ft. to 12.8 ft.)

Telephoto:

Approx. 60 cm to 1.8 m (2.0 ft. to 5.9 ft.)

Wide-angle:

Approx. 60 cm to 3.5 m (2.0 ft. to 11.5 ft.)

Telephoto:

Approx. 60 cm to 1.9 m (2.0 ft. to 6.2 ft.)

Wide-angle:

Approx. 50 cm to 3.8 m (1.6 ft. to 12.5 ft.)

Telephoto:

Approx. 60 cm to 2.0 m (2.0 ft. to 6.6 ft.)

If you take pictures outside of the effective flash range,

the image may appear dark even if the flash is used.

CAUTION Notes on using flash

• If pressing the shutter button while the flash is charging

(indicator lamp blinking orange), the picture will be

taken without the flash (when using AUTO and b).

• The flash charging time may increase when the

batteries are low on charge.

• When taking a picture using the flash, the image may

disappear and go dark briefly due to flash charging. The

indicator lamp blinks orange during charging.

• The flash fires several times (pre-flashes and the main

flash). Do not move the camera until the picture is

taken.

CHECK

List of available flash modes in each Photography mode

(, b, and are not available on the FinePix

A610).

AUTO b d Cc n

s✓ ✓ ✓ ✓ ✓ ✓

AUTO ✓ ✓ ✓ ✓

✓

✓ ✓ ✓ ✓

b✓ ✓

✓ ✓ ✓ ✓

m✓ ✓ ✓ ✓ ✓ ✓

,✓

.✓ ✓ ✓

8✓ ✓ ✓

✓

✓ ✓ ✓ ✓

✓

✓ ✓

✓ ✓ ✓ ✓

✓

✓ ✓

Produkt Specifikationer

Mærke:	Fuji
Kategori:	Digital kamera
Model:	Finepix A 610

Har du brug for hjælp?

Hvis du har brug for hjælp til Fuji Finepix A 610 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Digital kamera Fuji Manualer

Fuji Finepix T 190 series Manual

23 August 2024

Fuji Z100fd Manual

23 August 2024

Fuji Finepix AV200 series Manual

22 August 2024

Fuji Finepix JX 200series Manual

22 August 2024

Fuji Finepix A 800 Manual

21 August 2024

Fuji Finepix S3900 Series Manual

20 August 2024

Fuji Finepix A 610 Manual

20 August 2024

Fuji Finepix A 825 Manual

19 August 2024

Fuji FinePix J50 Manual

18 August 2024

Fuji Finepix S800 Manual

17 August 2024

Digital kamera Manualer

Nyeste Digital kamera Manualer

Panasonic lumix dmc tz6eg k Manual

15 Januar 2025

Panasonic DMC-S3 Lumix Manual

15 Januar 2025

GoPro Hero 3 White Manual

15 Januar 2025

Umax astra pix 540 Manual

12 Januar 2025

Tevion SZ 7 Manual

12 Januar 2025

Technaxx x11 Manual

12 Januar 2025

Polaroid pdc 1075 Manual

11 Januar 2025

Kodak Easyshare M1033 Manual

11 Januar 2025

Kodak EasyShare C875 Manual

11 Januar 2025

Technaxx TX-117 Manual

11 Januar 2025