Fujitsu Happy Hacking Manual

Fujitsu Tastatur Happy Hacking

Læs nedenfor 📖 manual på dansk for Fujitsu Happy Hacking (2 sider) i kategorien Tastatur. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
P3PC-6641-01EN
Happy Hacking Keyboard
Professional HYBRID
(US Layout/Non-Printed)
User’s Guide
* P 3 P 1 EC - 6 6 4 1 - 0 N *
Introduction
Thank you for purchasing Happy Hacking Keyboard Professional HYBRID (US Layout/Non-Printed).
Please read this User's Guide and use this product safely and correctly. Be sure to read and under-
stand "Safety Precautions" (a separate manual) before using the keyboard.
Mac, Mac OS, and macOS are trademarks of Apple Inc.
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Android is a registered trademark or trademark of Google Inc.
Other company names and product names are the registered trademarks or trademarks of the respec-
tive companies.
ⒸPFU Limited 2019 October 2019
Checking the Items in the Package
Make sure that all items shown below are included in the package:
□Keyboard (x1)
□Size AA alkaline dry battery (for checking operation) (x2)
□Safety Precautions (x1)
□User's Guide (this manual) (x1)
If items other than those shown above are included in the package, keep them as well. Treat the items
that are included in the package with care. Retain the box and any packaging material as they would be
needed to protect the keyboard should it be necessary to return the item in the event of a warranty claim.
If you find that an item is missing or defective, contact the distributor/dealer where you purchased this
product.
This product does not include a Bluetooth USB adapter or a USB cable.
If the device that you use does not support Bluetooth, a commercially available Bluetooth USB adapter
or USB cable is required.
Part Names and Functions
Front
Status of the LED Indicator
Status Description
Turned Off The keyboard is in connected
mode/OFF mode
Blinking in Blue
(twice per second)
The keyboard is in
pairing
standby mode
.
Blinking in Blue
(four times per
second)
The keyboard is in
pairing
mode
.
Lit in Blue The keyboard is in connect
standby mode
Blinking in Or-
ange
When the LED indicator blinks in
orange once every 30 seconds, the
remaining battery power is low.
When the LED indicator blinks
in orange twice every 15 sec-
onds, replace the batteries.
Switching the Setting Mode
Switch the setting mode according to the device that you use. By using the DIP switches on the bot-
tom of the keyboard, you can change the keyboard setting mode. The HHK mode is set as the factory
default.
You can also change some key codes. To change the settings for the DIP switches, use a tool such as
a flathead screw driver.
ATTENTION
Be sure to turn off the power before setting any of the DIP switches. If the power is on, the settings
you changed are not applied.
1 Remove the DIP switch cover on the bottom of the keyboard in the direction of
the arrow.
The gure below shows ON/OFF for each DIP switch.
2 Switch the setting mode by referring to the tables below.
DIP Switch Setting Mode
SW1 SW2
OFF OFF HHK mode Windows
®/AndroidTM
ON OFF Win mode
OFF ON Mac mode Mac OS/iOS/iPadOS
ON ON
DIP Switch Status Key Function
SW3 (*1) OFF Delete Delete
ON Delete BS (Back Space)
SW4 OFF Left ◇Left ◇
ON Left ◇Fn
DIP Switch Cover
ON
OFF
(Factory Default)
Back
Power Switch USB Type-C Connector
Battery Box
Part Name Description
Power
Switch
To turn on the power, hold down the power switch for 1 second or longer. To turn off
the power, hold down the power switch for 2 seconds or longer. Note that when the
power does turn off, the LED indicator lights in orange and then turns off.
Battery Box Insert batteries.
For details, refer to
"When Using Batteries"
.
USB Type-C
Connector
Use a USB Type-C cable to connect the keyboard to the device that you use or to
supply power to the keyboard instead of using the batteries.
For details, refer to
"Connecting the Keyboard (via a USB Connection)"
and
"When Sup-
plying Power via a USB Type-C Cable"
.
This product does not have a charging function for rechargeable batteries.
Use an optional USB Type-C cable that is sold separately or a commercially available
USB Type-C cable.
For details about how to purchase optional items, contact the distributor/dealer where
you purchased this product.
Bottom
DIP Switches
Tilt Stands
Part Name Description
DIP Switches Used to switch the setting mode.
For details, refer to
"Switching the Setting Mode"
.
Tilt Stands Used to adjust the height of the keyboard.
For details, refer to
"Adjusting the Height of the Keyboard"
.
DIP Switch Status Key Function
SW5 OFF Alt Alt
◇ ◇ (*2)
ON Alt ◇ (*2)
◇Alt
SW6 OFF Power Saving Enabled (*3)
ON Power Saving Disabled (*4)
*1: In Mac mode, SW3 is disabled.
*2: In Win mode, ◇ functions as the [Windows] key.
In Mac mode, ◇ functions as the [Command] key.
*3: If the keyboard is left unused for 30 minutes, it automatically enters OFF mode. However,
if the keyboard is connected to the device via a USB cable, it does not enter OFF mode. In
addition, when Power Saving Enabled is set, the device in use cannot be resumed from the
suspended status by pressing a key.
*4: Even if the keyboard is left unused for a long time, it does not automatically enter OFF mode.
Because of this, Power Saving Disabled consumes battery power faster than Power Saving
Enabled. If the keyboard is disconnected from the device in use, press any key or the power
switch to reconnect the keyboard to the disconnected device.
3 Attach the DIP switch cover back.
When attaching the cover, make sure you push it until it locks in place.
・OFF mode (power off)
This mode indicates the following statuses:
ｰWhen the power switch was held down
(for 2 seconds or longer) in any mode
ｰ When no keys are pressed for 30 minutes
in connected mode (when the SW6 is set
to ON or when power is supplied via a
USB Type-C cable, refer to the note for
SW6 in "Switching the Setting Mode")
ｰWhen no keys are pressed for 10 min-
utes in pairing mode
ｰWhen the keyboard is disconnected
from the device in use
To resume from OFF mode, hold down the power switch
(for 1 second or longer) to connect it to the device again.
・Pairing standby mode
This mode indicates the status before the
keyboard enters paring mode.
When you hold down
Fn
and
Control
in this
order and then press one of the number keys
(
1
to
4
), the keyboard enters pairing mode.
For details, refer to
"Switching the Setting
Mode of the Keyboard to the Pairing Mode"
.
・Pairing mode
The keyboard is ready to be connected to a device.
・Connect standby mode
This mode indicates that the keyboard is waiting for the de-
vice to be connected again. When you hold down
Fn
and
then press
Q
, the keyboard enters pairing standby mode.
3
4
5
6
7
82
1
LED Indicator
This product has the following operation modes.
・Connected mode
The keyboard is connected to a device. You
can use the keyboard for the connected device.
When you hold down
Fn
and then press
Q
,
the keyboard enters pairing standby mode.
Specications
Item Specification
Key Specifications Electrostatic capacitive switch/Step sculpture/Key pitch: 19.05 mm
Ambient Tempera-
ture
5 to 35°C
Ambient Humidity 20 to 80%RH (non condensing)
Dimension 294 mm (W) x 120 mm (D) x 40 mm (H)
Weight Approx. 540 g (without the batteries)
Connection Method
Bluetooth wireless connection method
USB2.0 (Type-C)
Compatible Stan-
dards
Bluetooth Version 4.2 Class 2
Profile Bluetooth HOGP (HID over GATT profile)
Radio Frequency 2.4 GHz band
Radio Frequency
Modulation
GFSK modulation
Radio Wave Out-
reach
Approx. 10 m (when no magnetic objects are in the vicinity)
Battery Replace-
ment Interval
Interval that is estimated when size AA alkaline dry batteries are used
Approx. three months (This is not guaranteed because it is a value that is esti-
mated from the test conducted in our environment.)
Required Batteries Two size AA dry batteries
(Size AA alkaline dry batteries, size AA manganese dry batteries, and size AA
nickel hydride secondary batteries)
Adjusting the Height of the Keyboard
The tilt mechanism is equipped on the bottom of
the keyboard, allowing you to adjust the height
at two levels. Raise one of the tilt stands that
suits you until it locks in place. Use the same tilt
stands on the right and left sides.
Low
Middle
High
Troubleshooting
For troubleshooting tips for this product, refer to
the following website:
www.hhkeyboard.us
Daily Care
If this product gets dirty, wipe it with a dry cloth.
ATTENTION
To avoid deterioration and discoloration, nev-
er use alcohol or any other volatile solutions.
Supplying Power
ATTENTION
When batteries are inserted into the keyboard (or power is supplied via a USB Type-C cable), it
turns on and enters connect standby mode in order to connect to the device that it was connected
to last. However, if the device is not ready to be connected to the keyboard when batteries are used
for the power supply, the keyboard turns off.
When Using Batteries
ATTENTION
• Use size AA batteries for this product.
• Be sure to turn off the power before replacing the batteries.
1 Remove the battery box cover on the bottom of the keyboard by pulling it to-
wards you while pushing it to the left.
Battery Box Cover
2 Insert the batteries in the direction shown in the gure.
＋−＋−
＋−＋
ATTENTION
Check the positive
＋
and negative
−
direction of the 2 batteries, and insert them correctly.
3 Attach the battery box cover back.
When attaching the cover, make sure you push it until it locks in place.
When Supplying Power via a USB Type-C Cable
Connect a USB Type-C cable to the USB Type-C connector
Use an optional USB Type-C cable that is sold separately or a commercially available USB Type-C
cable.
For details about how to purchase optional items, contact the distributor/dealer where you purchased
this product.
USB Type-C Connector
ATTENTION
The battery power is not consumed (except for natural discharge).
Remove the batteries if you do not use them for a long time.
System Requirements
This product can be used with the following computers or devices.
・Computers with Windows
® (Windows® 7/Windows® 8.1/Windows® 10) installed (*1)
・Computers with Mac OS (USB connection: macOS 10.12 or later/Bluetooth connection: macOS
10.14 or later) installed
・Mobile devices with iOS (iOS 11.4 or later) or iPadOS (iPadOS 13.0 or later) installed
・Mobile devices with Android
TM (AndroidTM 4.4 or later) installed
*1: Computers with Windows® 7 installed cannot be connected via Bluetooth. Use a USB cable to
establish a connection.
For a connection via Bluetooth, the device that you use needs to support Bluetooth 4.0 or later.

Produkt Specifikationer

Mærke: Fujitsu
Kategori: Tastatur
Model: Happy Hacking

Har du brug for hjælp?

Hvis du har brug for hjælp til Fujitsu Happy Hacking stil et spørgsmål nedenfor, og andre brugere vil svare dig


Tastatur Fujitsu Manualer

Fujitsu

Fujitsu E61000 Manual

1 Oktober 2024
Fujitsu

Fujitsu KB410 Manual

4 August 2024
Fujitsu

Fujitsu Happy Hacking Manual

28 Juli 2024
Fujitsu

Fujitsu CG01000-296501 Manual

15 Juli 2024
Fujitsu

Fujitsu CG01000-297101 Manual

11 Marts 2024
Fujitsu

Fujitsu Happy Hacking Professional Hybrid Manual

24 December 2023
Fujitsu

Fujitsu KB915 Manual

25 Juni 2023
Fujitsu

Fujitsu CG01000-296401 Manual

19 Juni 2023

Tastatur Manualer

Nyeste Tastatur Manualer

Philips

Philips SPT6607B Manual

21 December 2024
Philips

Philips SPT6407B Manual

21 December 2024
Philips

Philips SPT6347 Manual

21 December 2024
Philips

Philips SPK6337 Manual

21 December 2024
Philips

Philips SPT6627 Manual

21 December 2024
Philips

Philips SPT6337 Manual

21 December 2024
Philips

Philips SPT6317 Manual

21 December 2024
Philips

Philips SPK6334 Manual

21 December 2024
Philips

Philips SPK6347 Manual

21 December 2024
Philips

Philips SPK6237 Manual

21 December 2024