Garmin GHC 10 Manual


Læs nedenfor 📖 manual på dansk for Garmin GHC 10 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Printing a Mounting Template
NOTICE
These instructions for printing a mounting template must be followed precisely. Failure to do so may result in incorrect dimensions on the
template and an incorrect cutout (too large or too small) on the mounting surface of your boat.
To print the attached mounting template, check the dimensions of the template and select the appropriate size of paper. Both the length and
width measurements are indicated on the template.
The paper size must be larger than the dimensions of the template. Select the paper size using the button in the Adobe Acrobat print Properties
dialog box.
Select to ensure the template prints in the correct orientation.Auto-Rotate and Center
IMPORTANT: Page Scaling When printing the ush mount template, set in the Adobe Acrobat print dialog box to .None
Page Scaling:
Select :None
Auto-Rotate and Center:
Select with a check mark
for correct orientation
Properties: Select
the paper size.
Paper size (example):
Use appropriate size paper.
NOTICE
After printing and before cutting the mounting surface, measure the printed template to ensure both the length and the width printed at the
correct size and to ensure that the dimensions of the printed template match the actual size of your mount. Garmin is not responsible for any
damages or expenses resulting from a miscut mounting surface arising from a failure to follow these instructions.


Produkt Specifikationer

Mærke: Garmin
Kategori: Ikke kategoriseret
Model: GHC 10

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin GHC 10 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Garmin Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024