Garmin GPSMAP 902 Manual


Læs nedenfor 📖 manual på dansk for Garmin GPSMAP 902 (8 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 26 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/8
GPSMAP® 702/902 SERIES
Installation Instructions
Important Safety Information
WARNING
See the guide in the Important Safety and Product Information
product box for product warnings and other important
information.
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place voids the product warranty.
CAUTION
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
To obtain the best performance and to avoid damage to your
boat, install the device according to these instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation,
contact Garmin® Product Support.
Registering Your Device
Help us better support you by completing our online registration
today.
Go to .my.garmin.com
Keep the original sales receipt, or a photocopy, in a safe
place.
Contacting Garmin Support
Go to for help and information, such as support.garmin.com
product manuals, frequently asked questions, videos, and
customer support.
In the USA, call 913-397-8200 or 1-800-800-1020.
In the UK, call 0808 238 0000.
In Europe, call +44 (0) 870 850 1241.
Software Update
You may need to update the device software when you install
the device or add an accessory to the device.
This device supports up to a 32 GB memory card, formatted to
FAT32.
Loading the New Software on a Memory Card
1Insert a memory card into the card slot on the computer.
2Go to .www.garmin.com/support/software/marine.html
3Select next to .Download GPSMAP Series with SD Card
4Read and agree to the terms.
5Select .Download
6Select .Run
7Select the drive associated with the memory card, and select
Next Finish > .
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card.
1Turn on the chartplotter.
2After the home screen appears, insert the memory card into
the card slot.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3Follow the on-screen instructions.
4Wait several minutes while the software update process
completes.
5When prompted, leave the memory card in place and restart
the chartplotter manually.
6Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
Tools Needed
• Drill
Drill bits appropriate for the device and mounting style
Mounting Style Drill Bit Sizes
Bail with included M4 wood screws 3.2 mm (
1/8 in.)
Flush 13 mm (1/2 in.)
Flush with included M3.5 wood screws (702 series) 2 mm (
5/64 in.)
Flush with included M4 wood screws (902 series) 3.2 mm (
1/8 in.)
Flush with included machine screws and nut plates 6 mm (
1/4 in.)
4 mm (3/16 in.)
Flush with included M3.5 machine screws and
tapped holes (702 series)
M3.5 tap
Flush with included M4 machine screws and tapped
holes (902 series)
M4 tap
#2 Phillips screwdriver
Jigsaw or rotary tool
File and sandpaper
Marine sealant (recommended)
Mounting Considerations
NOTICE
This device should be mounted in a location that is not exposed
to extreme temperatures or conditions. The temperature range
for this device is listed in the product specifications. Extended
exposure to temperatures exceeding the specified temperature
range, in storage or operating conditions, may cause device
failure. Extreme-temperature-induced damage and related
consequences are not covered by the warranty.
When selecting a mounting location, you should observe these
considerations.
The location should provide optimal viewing as you operate
your boat.
The location should allow for easy access to all device
interfaces, such as the keypad, touchscreen, and card
reader, if applicable.
The location must be strong enough to support the weight of
the device and protect it from excessive vibration or shock.
To avoid interference with a magnetic compass, the device
should not be installed closer to a compass than the
January 2017 Printed in Taiwan 190-02141-02_0C


Produkt Specifikationer

Mærke: Garmin
Kategori: Ikke kategoriseret
Model: GPSMAP 902

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin GPSMAP 902 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Garmin Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024