GE Café CXADTH1PMBT Manual

GE Opvaskemaskine Café CXADTH1PMBT

Læs nedenfor 📖 manual på dansk for GE Café CXADTH1PMBT (3 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/3
31-2000163 Rev. 2 08-18
I. Removing the Handle
1. Locate the set screws on the handle caps (they are usually on the
less visible side).
2. Loosen the set screw on one end with the 1/8” Allen wrench while
supporting the handle. Do not remove the set screw from the
handle cap.
3. Keep supporting the handle while you loosen the set screw on the
other handle cap. Lift the handle from the fasteners on the door
and set aside.
II. Replacing a New Handle
1. Make sure the set screws are loosened. Place the handle over the
fasteners of the door (we recommend putting the screw side of the
handle toward the less visible side). Take care to support the
handle so it doesn’t fall and scratch the appliance finish. Make sure
both the handle caps are resting on the face of the door.
2. Lock one end of the handle into position by tightening the set
screw in the handle cap with the 1/8” Allen wrench. Be sure not to
over tighten.
3. Keep supporting the handle as you lock the other end of the
handle into position by tightening the set screw in the handle cap
with the 1/8” Allen wrench. Be sure not to over tighten.
Repeat these instructions on all other handles.
Instructions for Replacing Appliance Handles
Instrucciones En Español | Instructions En Français:
www.cafeappliances.com/kit-instructions
3/16” Allen Wrench
(not included)
1/8” Allen Wrench
(included with handle)
Tools You Will Need:
LOOSEN
fig. 1
fig. 2
Replacing Your Café Handles
fastener
handle cap
set screw
set screw
The handle on your appliance may have a dierent orientation than what is
shown, but the installation will be the same.
Be extra careful of the appliance finish around the handle area, as it can
scratch. During removal of the handle screws, hold onto the handle tightly
so it won’t fall and scratch the appliance. We recommend having another
person help you hold the handle in place as you remove the screws.
When the handle has been removed, check the fasteners that are
attached to the appliance front to see if they are loose. If so, tighten them
with a 3/16” Allen wrench before attaching the new handle.
Note: Fastener shape may vary by appliance.
For appliances with multiple handles, look at your current configuration
before removing the handles, and make sure the replacement handles
match that logo and set screw position.
IMPORTANT!

Produkt Specifikationer

Mærke: GE
Kategori: Opvaskemaskine
Model: Café CXADTH1PMBT

Har du brug for hjælp?

Hvis du har brug for hjælp til GE Café CXADTH1PMBT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Opvaskemaskine GE Manualer

GE

GE CDT888P2VS1 Manual

1 September 2024
GE

GE CDP888M5VS5 Manual

1 September 2024
GE

GE Profile PDT145SGLWW Manual

28 August 2024
GE

GE Profile PDT145SSLSS Manual

28 August 2024
GE

GE Profile PDW7880NSS Manual

28 August 2024
GE

GE CDT765SSFSS Cafe Manual

26 August 2024
GE

GE PDW7300GCC Manual

23 August 2024
GE

GE PDW7300GBB Manual

23 August 2024
GE

GE GPF875W Manual

15 August 2024
GE

GE GPF310B Manual

13 August 2024

Opvaskemaskine Manualer

Nyeste Opvaskemaskine Manualer

Siemens

Siemens SN45M283SK Manual

3 December 2024
Bosch

Bosch SGS44E72EU Manual

29 November 2024
Samsung

Samsung DW60M9550BB Manual

26 November 2024
Bosch

Bosch SMS63M18AU Manual

26 November 2024
Kogan

Kogan KABNCHTPDWA Manual

26 November 2024
Siemens

Siemens SX64M080EU Manual

26 November 2024
Bosch

Bosch SGU53E15AU Manual

25 November 2024
Samsung

Samsung DW60M5044FS Manual

24 November 2024
Samsung

Samsung DW60DG550B00 Manual

24 November 2024
Samsung

Samsung DW60DG540FSR Manual

24 November 2024