GE JXS37WW Manual

GE Komfur JXS37WW

Læs nedenfor 📖 manual på dansk for GE JXS37WW (1 sider) i kategorien Komfur. Denne guide var nyttig for 39 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Installation Instructions
Backsplash Kit
Tools Required:
#2 Phillips screw driver
Installing the Kit
Attach the assembly to rear of the range to the five holes above the louvers using the 5 screws
located in the pack. See Figure 1
A
A1
A2
Attach the backsplash assembly to the rear of the range prior to installing the range in the
countertop opening.
A3
Pub. No. 31-10452
229C4053P426
If the backsplash is being attached to a Drop-In range, the anti-tip bracket must be moved to
position 5 and proper attachments to the wall must be made to assure that the anti-tip bracket
engages below the attachment. The attachment must be able to withstand 200 lbs of force at the
engagement point. Refer to the Figure 2 below.
A4 Refer to the range Installation Instructions to place the range in the countertop opening and
perform all tests required.
The purpose of the backsplash kit is to fill the gap between the back of the range and the wall, when
the countertop opening is cut to a 25” depth.
NOTE: This kit supplies a spacer that is used when a body side kit is used in conjuction with this kit.
Keep this part for that type of application.
1/4Hex head Driver
Parts Supplied:
Backsplash Assembly
5 Screws
1 Spacer
Fig. 1
Fig. 2
1
2
3
4
5
Anti-Tip Bracket Location
( Rear of Range )
Glass Cooktop
Move
Anti-Tip bracket
from Position 1
(as supplied)
to Position 5
Interior Wall
BACKSPLASH ANTI -TIP INSTALLATION
DROP - IN ONLY
Backsplash
Attachment
Anchored to
Wall Stud Is
Recommended
Anti-Tip
Bracket
Attachment
To Engage
Bracket By 1/2"
Position #5
NonKit
Applications
1-1/2"
10 - 3/8"
Attachment
*
Wire
Cover
Wall
Stud
Glass Maintop Countertop
Surface
Cook Top
Wire Cover
Backsplas
Backsplas
Backsplas
Backsplas
Backsplash
Move Anti-Tip Brac
Move Anti-Tip Brac
Move Anti-Tip Brac
Move Anti-Tip Bracket
ket
ket
ket
for Dr
for Dr
for Dr
for Drop-IN with this
op-IN with this
op-IN with this
op-IN with this
Move Anti-Tip Bracket
(See Fig. 2)
5-Screws Supplied
(2 - each end
1 - in the middle)
Drop-In Only


Produkt Specifikationer

Mærke: GE
Kategori: Komfur
Model: JXS37WW

Har du brug for hjælp?

Hvis du har brug for hjælp til GE JXS37WW stil et spørgsmål nedenfor, og andre brugere vil svare dig




Komfur GE Manualer

GE

GE JCB840 Manual

17 Januar 2025
GE

GE JGS650SEFSS Manual

24 December 2024
GE

GE PC2S930YPFS Manual

16 August 2024
GE

GE JDP36BWWH Manual

6 August 2024
GE

GE JGBS60DEKCC Manual

26 Juli 2024
GE

GE JB640DFWW Manual

27 Maj 2024
GE

GE JBS61BCAD Manual

26 Maj 2024
GE

GE EER3001LSS Manual

23 Maj 2024
GE

GE JGSP28BEKBB Manual

21 Maj 2024

Komfur Manualer

Nyeste Komfur Manualer