Gravity SP 3102 TM Manual

Gravity højttalerstøtte SP 3102 TM

Læs nedenfor 📖 manual på dansk for Gravity SP 3102 TM (2 sider) i kategorien højttalerstøtte. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Gravity® is a registered brand of the Adam Hall Group Adam Hall GmbH | Adam-Hall-Str. 1
61267 Neu-Anspach | Germany
Phone: +49 60 8
adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from
the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to prod-
uct failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of pack-
aging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please con-
tact your local distributor.
MANUFACTURER’S WARRANT Y & LIMITATION OF LIABILIT Y
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf
To request warranty service for a product, please contact Adam Hall GmbH, Adam-
Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste sep-
aration)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid envi-
ronmental damage or personal injury due to uncontrolled waste disposal. Please dispose
of this product separately from other waste and have it recycled to promote sustainable
economic activity.
FEATURE S
• Compact table clamp with 100 mm clamping range
• Infinitely variable height adjustment
• 360° rotatable
• Up to +/- 15° tilt angle
• EVA-padded surface
• Anti-tipping protection for speakers
DESCRIP TION
Mastering and mixing professionals usually listen to music in ideal conditions in control
rooms specifically designed for mastering and mixing. Studio monitors are either built
into the wall or installed on expensive stands positioned just far enough away from
studio furniture so that nobody can accidentally bump into them. In day-to-day life,
however, most musicians, producers, podcasters, etc., put their monitors right on the
table. Not because this is the best solution, but because there’s not enough space
available.
Even if you invest in a good table stand in this case, you still have to live with the fact
that people might walk by or carelessly move the entire structure and destroy your
optimum listening set-up. Regular stands for studio monitors also need a lot of room
on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand
features a table clamp to securely and safely attach the structure to tables with
tabletops no thicker than 100 mm. Just like other Gravity products, it can be tightened
using a sturdy and handy knob. In contrast to conventional table stands which require
a large base plate to not budge, SP 3102 TM’s clamp base is only 10 × 7 cm and
does not take up more space than a standard screen holder. The intelligent design
of the studio monitors means they do not stick too far out onto the table. This ensures
a greater distance between the listener and monitors even when tables aren’t that
deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in
position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the
monitors into the listening position. The stand has clearly visible markings to adjust
the height, rotation, and tilt. There’s also EVA padding and an anti-tipping device to
make sure your valuable monitors rest securely on the upper shelf, even when tilted
up to 15°. You can now sit back and enjoy the sweet spot!
SPECIFICATIONS
Product number GSP3102TM
Product type Stands and Tripods
Type Speaker Stands
Tubing material Steel
Tubing color Black
Tubing surface Powder-coated
Min. height 250 mm
Max. height 350 mm
Tilt angle +/- 15°
Rotation 360°
Bearing surface 240 x 250 mm, EVA padded
Height adjustment Adjusting screw
Clamp base material Steel
Clamp base edge length 100 x 70 mm
Clamping range up to 100 mm
Max. load 25 kg
Interchangeable rings 2x 30 mm 1x 15 mm
Black ring pack included Yes
Weight 2.7 kg
FLEXIBLE STUDIO MONITOR STAND
WITH TABLE CLAMP ∙ SP 3102 TM

Produkt Specifikationer

Mærke: Gravity
Kategori: højttalerstøtte
Model: SP 3102 TM

Har du brug for hjælp?

Hvis du har brug for hjælp til Gravity SP 3102 TM stil et spørgsmål nedenfor, og andre brugere vil svare dig


højttalerstøtte Gravity Manualer

Gravity

Gravity SP 3202 VT Manual

18 August 2024
Gravity

Gravity SP 3102 TM Manual

14 August 2024
Gravity

Gravity SP 3102 Manual

12 August 2024
Gravity

Gravity SP 3202 Manual

12 August 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Nedis

Nedis SPMT5750BK Manual

3 Oktober 2024
Vogel's

Vogel's Sound 4203 Manual

27 September 2024
Vogel's

Vogel's Sound 4201 Manual

13 September 2024
Extron

Extron SMK VRE 48 Manual

6 September 2024
Sanus

Sanus BSWM3IWP Manual

6 September 2024
Sanus

Sanus WSWM3IWP Manual

6 September 2024
Valcom

Valcom V-9915M Manual

6 September 2024
Valcom

Valcom V-9912M Manual

6 September 2024
Valcom

Valcom V-9910 Manual

6 September 2024
Valcom

Valcom V-9904M-5 Manual

6 September 2024