Gre KIT730ECO Manual

Gre Pool KIT730ECO

Læs nedenfor 📖 manual på dansk for Gre KIT730ECO (32 sider) i kategorien Pool. Denne guide var nyttig for 71 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/32

H I M P R O V N . 2 1

A S S E M B LY I N S T R U C T I O N S E N

M A D E I N S P A I N

Manufacturas Gre, S.A. Aritz bidea nº 57

Belako industrialdea, apartado 69

48100 Munguia (Vizcaya) España

nº reg. Ind. 48-06762

Before starting with the assembly, read carefully the

instruction manuals of every components of the kit. Keep

this instructions for future reference.

Installation video on our website.

Non-contractual photos and pictures.

Steel wall

swimming pool.

3,5 m

E N

Safety

precautions.

safety precautions

minimum

0º

assembly instructions

Safety

precautions.

Carefully read, understand, and follow all information in this

user manual before installing and using the swimming pool.

These warnings, instructions, and safety guidelines address

some common risks of water recreation, but they cannot

cover all risks and dangers in all cases.

Always use caution, common sense, and good judgment

when enjoying any water activity. Retain this information

for future use.

Non swimmers safety

Continuous, active, and vigilant supervision of weak swim-

mers and non-swimmers by a competent adult is required

at all times (remembering that children under ﬁve are at the

highest risk of drowning).

→ Designate a competent adult to supervise the pool each

time it is being used.

→ Weak swimmers or non-swimmers should wear personal

protection equipment when using the pool.

→ When the pool is not in use, or unsupervised, remove

all toys from the swimming pool and its surrounding to

avoid attracting children to the pool.

Safety devices

→ It is recommended to install a barrier (and secure all

doors and windows, where applicable) to prevent unau-

thorized access to the swimming pool.

→ Barriers, pool covers, pool alarms, or similar safety de-

vices are helpful aids, but they are not substitutes for

continuous and competent adult supervision.

Safety equipment

→ It is recommended to keep rescue equipment (e.g. a ring

buoy) by the pool.

→ Keep a working phone and a list of emergency phone

numbers near the pool.

Safe use of the pool

→ Encourage all users especially children to learn how to

swim

→ Learn Basic Life Support (Cardiopulmonary Resuscitation

- CPR) and refresh this knowledge regularly.

This can make a life-saving difference in the event of

an emergency:

→ Instruct all pool users, including children, what to do in

case of an emergency

→ Never dive into any shallow body of water. This can lead

to serious injury or death.

→ Do not use the swimming pool when using alcohol or

medication that may impair your ability to safely use the

pool.

→ When pool covers are used, remove them completely

from the water surface before entering the pool.

→ Protect pool occupants from water related illnesses by

keeping the pool water treated and practicing good

hygiene. Consult the water treatment guidelines in the

user’s manual.

→ Store chemicals (e.g. water treatment, cleaning or disin-

fection products) out of the reach of children.

→ Signage is to be displayed in a prominent position within

2 m of the pool.

→ Removable ladders shall be placed on a horizontal sur-

face.

WARNING

Every electrical appliance fed in 220

V, has to be located at least at 3,50 m

from the edge of the pool.

The equipment should be connected

to a voltage, with earth connection,

protected by a residual current

device (RCD) having a rated residual

operating current not exceeding 30

mA.

Read the instructions carefully and

keep for future reference.

IF YOU HAVE ANY PROBLEM,

www.grepool.com/en/after-sales

3,5 m

E Npreparation of the site

Preparation

of the site.

Installation site

Our pools are designed to be installed di-

rectly on the ground and for outdoor family

use. The ground must be ﬁrm, smooth, and

perfectly ﬂat.

Do not forget: 1000 l. = 1 m

3 = 1000 Kgs.

Recommendations for choosing the best

location for your pool

→ Choose a place where you will have to dig as

little as possible to level the ground.

→ An area where in the event of rain, ﬂooding

will not occur.

→ Where there are no underground connec-

tions (water, gas, electricity, ...).

→ Do not install under power lines.

→ Protected from the wind and free from trees

since the pollen and leaves can make the

pool water dirty.

→ A sunny area, where there is most sun in the

morning.

→ Near an electricity outlet, water outlet, and

drainage.

NEVER DO THE INSTALLATION ON: sloping, uneven, loose, or sandy ground with stones.

minimum

A-A A-B=B-C C-D D-D

10,00 x 5,50 m. 10,20 x 7,50 m. 9,93 m. 2,750 m. 1 m. 4,87 m.

9,15 x 4,70 m. 9,35 x 6,70 m. 9,01 m. 2,350 m. 1 m. 4,87 m.

8,00 x 4,70 m. 8,30 x 6,70 m. 7,88 m. 2,350 m. 1 m. 3,75 m.

7,30 x 3,75 m. 7,50 x 5,75 m. 7,23 m. 1,875 m. 1 m. 3,75 m.

6,10 x 3,75 m. 6,30 x 5,75 m. 6,11 m. 1,875 m. 1 m. 2,62 m.

5,00 x 3,00 m. 5,20 x 5,00 m. 5,10 m. 1,500 m. 1 m. 2,62 m.

2.1

assembly instructions

Necessary tools (not included)

Mark the installation area:

Once the location area is chosen (which have

to be perfectly levelled), we’ll proceed at the

marking.

You ‘ve got 2 options for that:

→ 1° To prepare a concrete platform (ce-

ment,…) with the necessary measure ac-

cording to your swimming-pool size.

→ 2° Directly on the ground: To mark the

ground using wood pickets, screwdriver,

funnel (or plastic bottle), ﬂour or lime and

a rope.

It is advisable to level the total surface area

necessary before marking it (marking should

be centered on the rectangle corresponding

to the pool model) so that assembly work is

more convenient and easy.

Required surface

0º

2.2

2.3

E Npreparation of the site

Levelling:

When levelling the ground, always remove

material from the top of the slope rather than

ﬁlling in the bottom: this will ensure greater

ground stability and ﬁrmness. Always remove

all grass, roots, stones, etc. Levelling is ex-

tremely important: devoting the necessary

time and effort to ensuring that your pool

sits properly on the ground will avoid prob-

lems later.

How to level: thanks to a large mason rule

(aluminium or wood) and a level, level out

the ground forming rectangles (or squares),

locating this rule in the selected and cleaned

area. When all the areas are on level and

when the excess of ground is removed, you

may ﬁll in the small areas which are left to lev-

el out (with clean ground or sand) but always

compacting and levelling again afterwards. It

is very important the installation area is well

compressed and ﬁrm in order the ground do

not subside when the pool will be full of water.

Please ask a professional: builder, gardener,…

Finishing:

On the cleaned and levelled ground, spread a

light coat of sieved sand (max. 1cm).

Water and compact it (with a garden roller).

Check that is well levelled.

Do not use the sand to level the ground. The

ﬁnishing has to be perfect.

Necessary tools (not included)

assembly instructions

Components.

Draw and clasify all components included

before assembly.

It’s time to assemble the ladder and the

pump, follow the respective instructions.

Kits with missing parts will be covered by the

warranty only if reported to the after-sales

service within 15 days as from the date of

purchase of the swimming pool.

In order to avoid any possible injury all

swimming pool walking entrance must be

regulary checked.

PSP & PSO

TPL & TP

120 - 132 cm

132 cm

E Ncomponents

Please, pay attention to the joint protectors coming with your pool when you take out and classify its components:

→ If your pool comes with joint protectors EM (ZC+ZR) (see picture 1), you can ﬁnd your pool parts list on pages 10 and 11.

→ If your pool comes with joint protectors TPL&TP (see picture 2), you can ﬁnd your pool parts list on pages 12 and 13.

Important.

Picture 1

Picture 2

10,00

5,50 m

9,15

4,70 m

8,00

4,70 m

7,30

3,75 m

6,10

3,75 m

5,00

3,00 m

B2 886644

CH 111111

CN 443322

ZC 16 12 12 12 10 10

886644

EM1 664422

EM2 444444

LINER (L) 111111

PCF 19 17 15 13 12 10

PE 886644

PI 16 12 12 12 12 10

PIPC 14 10 10 10 10 8

ZC 16 I 10L 10L 10M 8R 8M

4S+6M 4S+6M 4S+4M 4S+4M 4S+2M 4Y+2M

PTM 886644

PSO+PSP 886644

PU 32 24 24 24 20 20

PU1 886644

PV 16 12 12 12 10 10

PV2 886644

T224 184 168 168 140 140

T2 48 48 36 36 24 24

T3 48 48 36 36 24 24

120 28 28 28 28 28 28

32 32 32 32 32 32

TPS 32 20 20 20 16 16

TPVC 111111

TPVCP 222222

9,90 x

5,45 m

9,01 x

4,65 m

7,90 x

4,65 m

7,20 x

3,75 m

6,10 x

3,75 m

5,09 x

3,00 m

h1,05 m 1,05 m 1,05 m 1,05 m 1,05 m 1,05 m

m350,75 39,12 33,63 25,32 20,89 14,55

120 cm

L LINER

PVC

TPVC

( KITENV )

PU1

( KITENV )

TPS

( KITENV )

PAPOSTE

( KITENV )

EM1

PBL

PSP

KITPSPPSO

PSO

KITPSPPSO

EM2

PEBASEL

KITPIOBLICUO

CINCHA

PLAYA

PLY

( KITENV )

Y = 540 mm

S = 705 mm

X = 820 mm

M = 1095 mm(large mm)

ZR ZC

PC-BAG

TPVCP PIPC

PC-BAG

PLV

PV2

KITPOSTE

PTM

KPOSTE

PCF

PC-BAG

I = 1145 mm

L = 1330 mm

Q = 1370 mm

R = 1365 mm

assembly instructions

Components.

pag. 24

PLY ZR PLY ZC

PLY

PLAYA

PLY

TPVCP

PROTECTOR

( KITENV )

TPS

PLUGS

( KITENV )

1 0

10,00

5,50 m

9,15

4,70 m

8,00

4,70 m

7,30

3,75 m

6,10

3,75 m

5,00

3,00 m

2-3 2-3 2-3 2-3 2-3 2-3

12h 10h 9h 8h 7h 6h

PCF

EM1

EM2

TPS

PU1

PCF

PSO

PSP

PTM

PV2

E Ncomponents

PLY ZC

PLY ZR

1 1

10,00

5,50 m

9,15

4,70 m

8,00

4,70 m

7,30

3,75 m

6,10

3,75 m

5,00

3,00 m

B2 886644

CH 111111

CN 443322

EM1 664422

EM2 444444

LINER (L) 111111

PCF 19 17 15 13 12 10

PE 886644

PI 16 12 12 12 12 12

PIPC 14 10 10 10 10 10

ZC 14 I 10L 10L 10M 10M 10X

4S+6M 4S+6M 4S+4M 4S+4M 4S+2M 4S+2M

PTM 886644

PSO+PSP 886644

PU 32 24 24 24 24 24

PU1 886644

PV 16 12 12 12 12 12

PV2 886644

T1 24 20 18 18 16 16

T224 184 168 168 152 152

T2 48 48 36 36 24 24

T3 48 48 36 36 24 24

TC 32 32 32 32 32 32

TPS 32 20 20 20 16 16

TPL & TP 24 20 18 18 16 16

TPVC 111111

TPVCP 222222

9,90 x

5,45 m

9,01 x

4,65 m

7,90 x

4,65 m

7,20 x

3,75 m

6,10 x

3,75 m

5,09 x

3,00 m

h1,17 m 1,17 m 1,17 m 1,17 m 1,17 m 1,17 m

m356,11 43,59 34,47 28,21 23,28 15,56

132 cm

L LINER

PVC

PIPC

PC-BAG

CH PI

PC-BAG

PCF

PC-BAG

PLAYA S = 705 mm

X = 820 mm

M = 1095 mm

(large mm)

I = 1145 mm

L = 1330 mm

( KITENV )

PU1

( KITENV )

PAPOSTE

( KITENV )

EM1

PBL

EM2

PEBASEL

KITPIOBLICUO

CINCHA

PLV

PV2

KITPOSTE

PTM

KPOSTE

PSP

KITPSPPSO

PSO

KITPSPPSO

TPVC

( KITENV )

TPVCP

Protector

( KITENV )

TPL & TP KITTPLTP

TPL

assembly instructions

Components.

PLY

PLY ZR PLY ZC

PLAYA

PLY

pag. 25

1 2

10,00

5,50 m

9,15

4,70 m

8,00

4,70 m

7,30

3,75 m

6,10

3,75 m

5,00

3,00 m

2-3 2-3 2-3 2-3 2-3 2-3

12h 10h 9h 8h 7h 6h

TPL & TP

TPL

PCF

EM2

EM1

PTM

PSO

PV2

TTP CH

PCF

PU1

PSP

E Ncomponents

PLY ZC

PLY ZR

1 3

2 -3

assembly instructions

Installation.

It is essential to follow these three steps to

achieve a correct assembly:

1. Section pieces must only be placed on the

curve area located at the lower part of the

pool (semi-circumferences), section pieces

must not to be placed on the straight parts.

The lower section pieces are curve (PI) and

they have a ﬂap (page 16). Flexible section

parts (PCF) are to be placed on the upper

part of the pool in both curve and straight

parts (page 21).

2. When closing the pool plate (CH) using the

screws (TC), make sure the screw heads are

facing inwards and the washer and the blind

nut outwards (page 19). Tighten the screws

without distorting the plate.

Important: The liner used in the

manufacturing of all our pools, is

developed for exposition to heat

and ultraviolet rays for long periods.

Therefore, under certain weather and

usage conditions, the liner qualities

can vary slightly. The interior liner

of the pool is manufactured from

flexible PVC (thermoplastic). The

properties of this material allow opti-

mal installations conditions when the

outside temperature is between 20 °C

and 25 °C.

Note: Temperature too low: hard

and rigid liner; later, too small. Tem-

perature too high: ﬂexible and elastic

liner; later, too big.

1 4

4.1

4.2

PU PE

EM2

EM1

EM2

EM1

PE CN

CN PE

1000 x

550 cm 4

915 x

470 cm 4

800 x

470 cm 3

EM1 EM2

1000 x

550cm 3+3 2+2

915 x

470cm 3+3 2+2

800 x

470cm 2+2 2+2

EM1 EM2

730 x

375cm 2+2 2+2

610 x

375cm 1+1 2+2

500 x

300cm 1+1 2+2

730 x

375 cm 3

610 x

375 cm 2

500 x

300 cm 2

EM2 PU

EM1 EM2

E N

Installation of the swimming pool:

We recommend that this is done by two or more

adults and on a day without wind.

For your safety, it is very important to wear gloves

while assembling the pool.

Each strut has 4 drop-forged parts (PE) riveted to

it which must be ﬁtted with the tabs upwards. Fully

extend the struts parallel to each other across the

straight part of the pool.

Fitting the metal brackets (EM1) - (EM2): The

central metal brackets (EM1) go in the central part

(half on one side and half on the other), attached to

the tabs on the drop-forged parts (PE) on the struts

by the screws (T2). The widest part of the metal

bracket should face the inside of the pool and the

narrow part should be upright so that it can be

attached to the innermost drop-forged part on the

strut. Once these brackets are in place and ﬁrmly

screwed on, ﬁt the outer brackets (EM2) onto the

ends, also with T2 screws, ensuring that the joining

pieces (PU) to be ﬁtted into the bracket (EM2) slots

face towards the point where the relevant half-cir-

cular pool end begins (Point C).

NB: When the metal brackets are ﬁxed together

the heads of the screws (T2) should face the inside

of the pool, and the washers and nuts should face

outwards.

installation

1 5

4.3

(H=132 cm) 1000 x 550 cm: 8 PI + 8 PU

(H=132 cm) 915 x 470 cm: 6 PI + 6 PU

(H=132 cm) 800 x 470 cm: 6 PI + 6 PU

(H=132/120 cm) 730 x 375 cm: 6 PI + 6 PU

(H=120 cm) 610 x 375 cm: 6 PI + 5 PU

(H=120 cm) 500 x 300 cm: 5 PI + 5 PU

(H=132 cm) 610 x 375 cm: 6 PI + 6 PU

(H=132 cm) 500 x 300 cm: 6 PI + 6 PU

EM2 CN

EM2

PIPC PE

(LO)

EM2

1cm

PIPC PI PU

PIPC

PI PIPC

assembly instructions

BOTTOM SECTION PIECES ( PI ) for oval swimming pools.

NOTE: These curved SECTION PIECES ARE FOR THE

BOTTOMS of OVAL SWIMMING POOLS. Position the

bottom section pieces (PI) in each half circumference. Fit

a drop-forged part (PU) on each section piece -( Not for

610x375x120 ). For the section pieces at the ends, ﬁt the

drop-forged parts right at the end of them. Join the sec-

tion pieces with a joining piece (PIPC), leaving a 1cm gap

between them.

IMPORTANT: the two half circumferences must be the same

length and have equal distribution. If on completing the wall-

plate installation it does not ﬁt exactly with the lengths of

the half circumferences, you will have to close up the bottom

section pieces (or if necessary open them up), always doing

the same for both half circumferences. ATTENTION: For

correctly positioning the parts, take one of the longest PU

BORDER (PLAYAS) pieces and use it to mark the distances

of the parts starting from point . This will facilitate the PU C

following steps for positioning the vertical proﬁles (p.18)PV

NOTE: Drop-forged parts PU under no circumstances

shall be afﬁxed to the ground by any means; in the event

of doing so, you run the risk of swimming pool breakage

and the automatic loss of the warranty.

* Use duct tape to cover parts PU and PIPC on the inside

of the pool and thus avoid that may damage the liner.

NOTE: If installed on soil already leveled in the previous

steps, we recommend using a slab or paving stone (LO)

embedded (at ground level) below each PU pressed proﬁle

to avoid that the PV vertical proﬁles sink in to the ground

due to weight of the water.

* These indications are for each half-circumference

1 6

4.4

PSP

PSO

PSP

PSO

PSP

PTM

PSO

E Ninstallation

1 7

4.5

4.6

PV2

PV2 PV2PE

PSP B2

PSO

PTM

T2 x 4

T3 x 2

PV2

PSP

PVO

PTM

PV2 PTM

PE PTMT3 x 2 T3 x 2

PV2 PV2

PSP

assembly instructions

This part of the structure is based on square-sec-

tioned upright supports (PV2) shored up by a

cross-support (PTM). Both are attached to the struts

by dropforged parts (PE). Each upright support

should be tted as follows:

1- Using T2 screws, attach the outer part of a

square-sectioned upright support (PV2) to one of

the drop-forged parts (PE), with the longest tab hor-

izontal and uppermost.

2- Place this upright on the drop-forged part on

the inner part of the strut (attached to the metal

bracket) and hold in place with two through screws

(T3). Each strap has 4 riveted pressed parts (PE)

that must be situated with their tabs upwards. Po-

sition the straps in the entire length. The belts are

transversally placed in the straight area of the pool,

parallel to each other.

3- Take a cross-support (PTM+PSP+PVO) and t

the squarer end to the drop-forged part half-way

up the upright support (PV2) already tted.

4- Use T3 screws to hold the more rectangular end

of the cross-support (PTM) in place on the drop-

forged part at the end of the relevant strut. Once

the whole upright is in place, tighten all screws

rmly. Repeat this process on all the struts until

the straight part of the pool is completed. (B2)

ENVELOPING JOINT PROTECTORS STRAIGHT

PART: When all the vertical perles of the straight

part are xed, you can install the enveloping joint

protector B2 to the bottom of the PTM which

combine to the strap CN. NOTE: (LO) If the

ground is not rm (concrete, etc.), we recommend

placing a tile under the ends of the struts (CN) so

that the cross-supports (PTM) will not sink down

under the weight of the water in the pool.

FITTING THE UPRIGHT SUPPORTS IN

THE STRAIGHT PART:

1000 x 550 cm= 8 x (PV2 & PTM)

915 x 470 cm = 8 x (PV2 & PTM)

800 x 470 cm = 6 x (PV2 & PTM)

730 x 375 cm = 6 x (PV2 & PTM)

500 x 300 cm = 4 x (PV2 & PTM)

610 x 375 cm = 4 x (PV2 & PTM)

1 8

Produkt Specifikationer

Mærke:	Gre
Kategori:	Pool
Model:	KIT730ECO
Bredde:	7440 mm
Dybde:	5750 mm
Højde:	1220 mm
Produktfarve:	Hvid
Ramme, materiale:	Stål
Pakkevægt:	275000 g
Pakkedybde:	800 mm
Pakkebredde:	890 mm
Pakkehøjde:	1540 mm
Materiale:	PVC, Plastic
Certificering:	EN 16582-3:2015, EN 16582-1:2015
Pallens bruttobredde:	900 mm
Pallens bruttolængde:	800 mm
Pallens bruttohøjde:	1690 mm
Produkter pr. palle:	1 stk
Kapacitet:	25320 L
Form:	Oval
Anbefalet alder (min.):	- År
Antal emballeringsbokse:	1
Stige:	Ja
Billede:	Ja
Pallens bruttovægt:	287000 g
Pakkevolumen:	1090000 cm³
Indre bredde:	7200 mm
Slange, diameter:	0.8 mm
Type af swimmingpool:	Indrammet pool
Montagetid:	480 min.
Antal personer der kræves for oprettelse:	2 person(er)
Teltlærred:	Ja
Pool skimmer:	Ja
Sæson:	Sommer
Vandfilter, type:	Slibefilter
Filtreringskapacitet:	4000 l/t
Pumpe effekt:	180 W
Indvendig dybde:	3750 mm
Indre højde:	1050 mm
Anbefalet alder:	Voksen & barn
Filtrerende sand:	Ja
Påkrævet område (B x D):	7700 x 5950 mm
Lydstyrke:	25.32 m³
Filterpumpe inkluderet:	Ja