GVM SD300S Manual
Læs nedenfor 📖 manual på dansk for GVM SD300S (1 sider) i kategorien Lys. Denne guide var nyttig for 32 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
160.00 mm
120.00 mm
封底 封面
封底的另一面留白，书本形式
封面内页
GVM-SD300S
FacebookGVM Official
website
Download APP
Web: www.gvmled.com
B&H Email: bh@gvmled.com
GVM Email: support@gvmled.com
Amazon Email: amazonsupport@gvmled.com
Warehouse Add: 4301 N Delaware ave, unit D. PHILADELPHIA, PA19137, USA
13
Product introduction ------------------------------------------- Page 1
Disclaimers -------------------------------------------------------- Page 2
Use and preservation ------------------------------------------ Page 2
Product parameter --------------------------------------------- Page 3
Product structure analysis ------------------------------------ Page 4
Installation method ----------------------------------------- Page 5~7
Description of product control keys ----------------------- Page 8
Function introduction and instruction --------------- Page 9~10
APP control ------------------------------------------------------ Page 11
Simple faults and troubleshooting ----------------------- Page 12
Precautions ------------------------------------------------------ Page 12
Packing list ------------------------------------------------------- Page 13
C O N T E N T S
N ame
Photography light
Qu an ti t y No t es
1
Power cord 1
1
1
1
Adapter
Condenser
Diffuser
PACKING LIST
1
Carrying bag
1
Instruction
13 5
1
2
3
4
Switch ON/OFF
LCD display: Display the current mode and parameters of the light
6 7 8 9 10
2114
112
Light Frame Interface
U-Shaped Frame
Bowens Mount
5
③ Adjust Brightness(BRG): Range 0%~100%
⑧ Online Control ( joint control between lamps and lamps):
Display the current brightness, control mode, light effect mode, light parameters,
scene number, and channel value of the light. ⑤ APP Control:
Rotate Mode or Master Mode: Turn the compound knob to adjust the brightness.
① LCD Screen:
Press the Mode Button to switch the control modes, which are:
Rotate, Master and Slave, APP, and DMX
② Mode Types and Functions:
④ Channel Adjustment (CH): Range 1~12
DC Interface
1.
DISCLAIMERS
Before using this product, please read the instructions carefully and make sure to
use the product correctly. Failure to follow the instructions and warnings may
cause injury to you and your surrounding people, and even damage the product or
other surrounding items.
2. Once you use this product, you are deemed to have carefully read the disclaimers
and warnings, understand and acknowledge all the terms and contents of this
statement, and promise to take full responsibility for use of this product and the
consequences that may result.
3. Design and specifications are subject to change without notice.
Do not expose the product to high humidity, strong electromagnetic fields,
direct sunlight, or high temperatures. If the product is not used for a long
time, please disconnect the power supply.
Clean：Before cleaning, please unplug the power supply and use a damp cloth
instead of any cleaning agent or soluble liquid to avoid damaging the surface layer.
USE AND PRESERVATION
Repairing：If there is fault or performance degradation, please do not
unpack the shell by yourself to avoid damage to the machine and loss the
maintenance rights. In case of malfunction, please do not hesitate to contact
us and we will do our best to deal with the problem.
Accessories：Please use the accessories or accessory products which supply
or approved by the manufacturer for best performance.
Guarantee：Please do not modify the product or you will lose the right to
maintenance.
Power：Make sure the power is within the demanded range for use, not too high
or too low. Insert the battery correctly to avoid damage to the machine.
PRODUCT STRUCTURE
ANALYSIS
Fixing Handle
for Lamp Holder
The lamp can be installed and fixed on the bracket by rotating the knob
clockwise, unloaded by rotating in the counterclockwise direction.
INSTALLATION METHOD
Insert the Bowens mount of the standard lampshade into the Bowens mount
of the light, and then turn it slightly clockwise.
Push Bowens dismantling buckle back while rotating the standard lampshade
counterclockwise to remove the standard lampshade.
Loosen the angle fixing handle, adjust the angle of the spotlight that you need,
and then turn the angle fixing handle tightly.
Connect the power cord to charge. DESCRIPTION OF
PRODUCT CONTROL KEYS
Composite knob: long press for 2 seconds to enter/exit scene mode (SC),
short press to enter/exit the current scene adjustment, turn the knob to
adjust brightness, channel and select scene.
Mode button: Switch the control mode.The modes include:
rotate, slave, master, APP, DMX
FUNCTION INSTRUCTION &
INSTRUCTION FOR USE
Rotate mode: The brightness can be adjusted through the compound knob.
Master mode: The brightness can be adjusted through the compound knob.
Slave mode: The channel can be adjusted by the compound knob, When the
channels of the Slave light and the Master light are the same, they can be
synchronously controlled by the Master light.
APP mode: In this mode, the channel can only be adjusted by the compound
knob. The light can be adjusted through the APP.
APP Mode: Connect to the APP and adjust the brightness through the APP.
In Slave Mode / APP Mode / DMX Mode, turn the composite knob to adjust
the channel.
In APP mode, connect to the APP and set the channel value through the APP.
Set the mode to APP mode, turn on the phone APP GVM LED. Find the Bluetooth
with the Bluetooth name BT_LED in the Bluetooth search interface and then
connect. After successfully connection, the camera light can be controlled through
the APP.
Prepare two or more video lights, set one light to master mode, and the
rest to slave mode, and then set the channel values of all video lights to be
the same. After that, you can control the brightness of the slave lights by
adjusting the brightness of the master light, synchronize the master light
and the slave lights.
You can also connect the APP to the master light and control the slave light
through the APP.
Control Interface
Turn on the video light and set the mode to APP mode. Open the
“GVM_LED” application software on the phone ( The phone needs to
turn on Bluetooth and GPS), then enter the Bluetooth search interface
→ Find the Bluetooth named “BT_LED” and connect → Wait for the
connection → After connecting success, it will automatically enter the
app’s control interface. At this time, the connected video light can be
controlled through the APP.
APP
CONTROL
Scan the QR code on the back of the manual to download the APP
PRECAUTIONS
The video light is not waterproof, please use it under rainproof environment.①
The video light is not anti-corrosion, please don’t let the light come into
contact with any corrosive liquid.
②
When you use the light, make sure that the product is placed firmly to prevent
the product from falling and being damaged;
③
When the product is not used for a long time, please turn off the power to
save energy loss.
④
SIMPIE FAULTS
AND TROUBLESHOOTING
Phenomenon
Make sure the adapter is well contacted
with the power plug.
Check the product Solution
The switch
indicator does
not light up
Whether the connection
between the lamp and the
power supply is normal.
APP can't
connect / can't
control
Check i f the product is
"turned off" by the other
APP.
① Restart the product.
② Press the APP switch ON/OFF button
The product is in
the "ON" state,
the display and
lights are not on
Check whether the device
i s in A PP m od e a nd
wh eth er " BT _ LED " is
displayed on the APP.
Normal steps:
① Switch to APP mode after booting;
② Phone with Bluetooth and GPS on;
③ Open the APP, search and connect to
Bluetooth BT_LED.
Diffuser Mount
COB lamp Bead
Light Frame Interface
LCD Screen
Switch ON/OFF
Vent
Snap
Angle Fixing Handle
Mode Button
Compound Knob Power Input Interface
DMX Interface
1
2
4
35
Snap
Adapter interface
5
DMX Interface
2
1
3
4
5
6
6
Connect to the DMX console via DMX adapter cable
(DMX adapter cable sells separately, Not Include)
DMX interface: DMX console input and output interface
DMX mode: Connect to the DMX console, adjust the brightness through the
DMX console.
In DMX mode, adjust the brightness through the DMX console.
⑥ DMX Control:
Connect the DMX console to the photography light through the control cable, and
set the light and DMX console to the same channel value, so that the photography
light can be controlled through the DMX console.
S C : C H :
Rotate
Slave
Master
APP
ms
TIM :
DMX
Scene number
(Only display when the
light is in Scene Mode)
Brightness
Channel value
Control mode
(only display current mode)
Time parameters
(can only be adjusted when the
light is in some specific scenes)
⑦ Adjust scene (SC): Range 1~8
There are 8 kinds of scenes in scene mode:Lightning, Flash, Candlelight, TV,
Bad Light Bulb, Explosion, Firework, Paparazzi.
Long press the compound knob for 2 seconds to enter the scene mode (SC) →
Rotate the compound knob to select the scene→ Short press the compound
knob to enter the current scene adjustment → adjust the brightness parameters
In the APP mode, connect to the APP and adjust the scene through the APP.
Welcome to ''GVM-SD300S”, this product is specially designed for senior
photography enthusiasts. The product is suitable for live streaming / outdoor /
studio photography, and also for YouTube video shooting.
PRODUCT
INTRODUCTION
①
②
With color temperature 5600K and stepless adjustable light brightness, the
“GVM-SD300S” light has a high color rendering index CRI 97+ COB lamp
bead which could help to restore and enrich the color of objects and
provides you with natural and vivid shooting effects.
App intelligent control system, which can be controlled by your intelligent
mobile device.
③“GVM-SD300S” has an LCD display and a stable system. It supports 360º
rotation which can effectively control light. It is also equipped with a
standard lampshade, after installation, the lampshade can help to avoid
excess light and make the light more concentrated. Customized control of
fill light allows you to shoot the desired results as easily as you want.
The main features of the product are:
PRODUCT
PARAMETER
Brand : GVM
Product Name : Photography Lights
Product Model : GVM-SD300S
Product Type : Photography Fill Light
Lamp Beads Quantity : COB*1
Color Rendering Index: ≥97
Color Temperature :5600K
Lumen : Naked lamp : 11000lux/1m
Add Standard Lampshade : 43500lux/1m
Light Adjustment Method : Stepless Adjustment
Function / Feature : LCD Screen, High Display, APP Control,
Master/Slave Mode Control, DMX Control
Product Net Weight: 3.15KG
Product Size (mm) : 228x123x349
Power : 300W
Voltage : AC 100-240V
Power Supply Mode : DC Input
Power Supply : 32V/9.5A
Cooling : Radiator & fan cooling
Product Material: Aluminum Alloy + Plastic
Commodity Origin : Huizhou, China
We firmly believe that the proper use of this product will certainly be of great
help to your shooting work. Before using the product, we strongly recommend
that you read the following user guide carefully.
④8 kinds of scene lights can be simulated: Lightning, Flash, Candlelight, TV,
Bad Light Bulb, Explosion, Firework, Paparazzi.
Produkt Specifikationer
| Mærke: | GVM |
| Kategori: | Lys |
| Model: | SD300S |
Har du brug for hjælp?
Hvis du har brug for hjælp til GVM SD300S stil et spørgsmål nedenfor, og andre brugere vil svare dig
Lys GVM Manualer
Lys Manualer
- Lys Ikea
- Lys Bosch
- Lys SilverCrest
- Lys Ozito
- Lys Denver
- Lys EasyMaxx
- Lys Siemens
- Lys Beurer
- Lys Metabo
- Lys TP-Link
- Lys RYOBI
- Lys Silverline
- Lys Philips
- Lys Aukey
- Lys Medisana
- Lys IFM
- Lys OK
- Lys LG
- Lys Qtx
- Lys Behringer
- Lys Emos
- Lys Technaxx
- Lys Makita
- Lys Thule
- Lys Livoo
- Lys Toshiba
- Lys Klarstein
- Lys Nikon
- Lys Kodak
- Lys Tracer
- Lys Eheim
- Lys Furrion
- Lys Biltema
- Lys AVM
- Lys Nedis
- Lys American DJ
- Lys Friedland
- Lys Abus
- Lys Adj
- Lys Westinghouse
- Lys Hama
- Lys Milwaukee
- Lys Dyson
- Lys JBL
- Lys TriStar
- Lys Clas Ohlson
- Lys Sanitas
- Lys Smartwares
- Lys Trust
- Lys Fysic
- Lys Laserliner
- Lys Adler
- Lys Black And Decker
- Lys Crivit
- Lys Livarno
- Lys Mio
- Lys Blaupunkt
- Lys Silva
- Lys Einhell
- Lys Stanley
- Lys Honeywell
- Lys Hikoki
- Lys Hilti
- Lys Festool
- Lys König
- Lys Eglo
- Lys Elro
- Lys Innoliving
- Lys Konstsmide
- Lys Lucide
- Lys Maxim
- Lys Näve
- Lys Nordlux
- Lys Osram
- Lys Sartano
- Lys Steinel
- Lys Gembird
- Lys Deltaco
- Lys Auriol
- Lys Powerfix
- Lys BenQ
- Lys Genie
- Lys Reer
- Lys Craftsman
- Lys Powerplus
- Lys Bresser
- Lys BeamZ
- Lys Goobay
- Lys Digitus
- Lys Sigma
- Lys Alecto
- Lys Cateye
- Lys Astro
- Lys Ansmann
- Lys Xiaomi
- Lys HQ
- Lys AFX
- Lys CAT
- Lys Marmitek
- Lys NGS
- Lys Godox
- Lys Stairville
- Lys Nexxt
- Lys Kathrein
- Lys GoPro
- Lys Fluval
- Lys Ikan
- Lys GlobalTronics
- Lys Reflecta
- Lys Elation
- Lys Omnitronic
- Lys Velleman
- Lys Perel
- Lys Vemer
- Lys GLP
- Lys HQ Power
- Lys Genaray
- Lys Harvia
- Lys Blumfeldt
- Lys Inventum
- Lys Eufy
- Lys Gre
- Lys IDance
- Lys Monacor
- Lys Sun Joe
- Lys Petzl
- Lys Black Diamond
- Lys Brennenstuhl
- Lys DJ Power
- Lys Litecraft
- Lys Cotech
- Lys Chamberlain
- Lys GAO
- Lys Elgato
- Lys Hazet
- Lys Steinhauer
- Lys Viessmann
- Lys Trio Lighting
- Lys Brandson
- Lys Martin
- Lys Brilliant
- Lys ARRI
- Lys Hähnel
- Lys Hive
- Lys Anslut
- Lys Runtastic
- Lys Nanlite
- Lys Eurolite
- Lys Vivitar
- Lys Zero 88
- Lys Megaman
- Lys Ledlenser
- Lys Chauvet
- Lys Manfrotto
- Lys Livarno Lux
- Lys Nitecore
- Lys Showtec
- Lys GoGen
- Lys Kogan
- Lys Gravity
- Lys Esylux
- Lys NEO Tools
- Lys Smith-Victor
- Lys Olight
- Lys V-TAC
- Lys Schwaiger
- Lys Steren
- Lys Neewer
- Lys Heitronic
- Lys XQ-lite
- Lys Ecolight
- Lys Lupine
- Lys Aqara
- Lys Blackburn
- Lys Media-Tech
- Lys Perfect Christmans
- Lys Lume Cube
- Lys SmallRig
- Lys Rosco
- Lys Light4Me
- Lys Eufab
- Lys Royal Sovereign
- Lys Aputure
- Lys Workzone
- Lys Kichler
- Lys Sygonix
- Lys Yongnuo
- Lys Profoto
- Lys Chrome-Q
- Lys Bazooka
- Lys Infinity
- Lys WiZ
- Lys Rayzr 7
- Lys MTX Audio
- Lys Mission
- Lys SLV
- Lys Integral LED
- Lys DeSisti
- Lys Paulmann
- Lys Fuzzix
- Lys Beghelli
- Lys Berger & Schröter
- Lys Lutec
- Lys Karma
- Lys Wireless Solution
- Lys NUVO
- Lys Neno
- Lys WAC Lighting
- Lys Quoizel
- Lys Audibax
- Lys Dainolite
- Lys Fredrick Ramond
- Lys Magmatic
- Lys Crystorama
- Lys ET2
- Lys Golden Lighting
- Lys OttLite
- Lys Sonneman
- Lys Elan
- Lys Kalco
- Lys Livex Lighting
- Lys Hudson Valley
- Lys Hinkley Lighting
- Lys Forte Lighting
- Lys Triton Blue
- Lys Schonbek
Nyeste Lys Manualer
20 November 2024
19 November 2024
19 November 2024
18 November 2024
18 November 2024
18 November 2024
17 November 2024
17 November 2024
17 November 2024
16 November 2024