Hager TYA720 Manual

Hager Ikke kategoriseret TYA720

Læs nedenfor 📖 manual på dansk for Hager TYA720 (4 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

Technical Specications

• Supply Voltage 21...32 V DC SELV

• BUS Consumption Max 25mA

• Switching functions ON ; OFF ;

Pulse ; cycle ;

annual program

• Programming capacity 300 steps

• Minimum time between 2 steps 1 min.

• Clock generator Quartz, KNX Bus

or DCF signal (optional)

• Power reserve Lithium battery

accumulation of 5 years of power outages

(unlimited backup of the program)

•

Accuracy (at 20° C) ≤ ± 0,25 sec /24 h

• Screen High resolution LCD

(12,8 cm2)

• Operating temperature -10 °C … +50 °C

• Storage temperature -20 °C … +70 °C

• Ball test temperature

75°C … 125°C

• Dimensions 4 modules ( 45 x 71,5 x 58 mm)

• Mounting DIN Rail (DIN EN 60715)

• Terminal Type Quick Connect

• Connection capacity

- Flexible : 0,75 to 2,5 mm2

- Rigid : 0,75 to 2,5 mm2

• Protection index IP 20 / IK 04

• Protection Class II

• Standards EN 60730-1; EN 60730-2-7;EN 50491-3;

EN 50491-5-1; EN 50491-5-2; EN 50491-5-3

• DCF input Yes, with use of double-insulated cable

(DCF antenna EG001, optional)

• Rated surge voltage 4kV

• Type of action 1

• Pollution level 2

• Software structure Class A

• Product delivered with current time and date set.

• Automatic change of summer/winter time.

• Programming key

- For permanent overrides

- For program copy or save

• 300 programme steps ; ON, OFF, pulses or .

• Permanent overrides On or Off

( permanent light on).

Connection diagram

Product Presentation

Presentation

• Temporary overrides On or Off ( ashing).

• Overrides (temporary, permanent or time delayed)

remote activation possible.

• Simulation of presence .

• Keyboard lock function by PIN number.

• Counter of operating time on every output.

• Programmable with power off.

• Display with backlight.

First Commissioning

When using for the rst time, the following

settings must be done :

- select the language

- select the year, month, day

- select the hour and the minutes

- select the automatic change summer/winter.

Press the buttons to set the display.+/–

Press OK to validate.

When the settings are nished, the clock goes to

automatic mode.

In the event of use of DCF antenna EG001, it is not

possible to change the time zone of the DCF signal

either on the product or in the ETS application.

At any time, pressing the button menu allows you

to return to the previous choice level.

To do the yearly programming of the clock, you

have the following 4 types of programme:

-Basic weekly programme

This is a non-priority weekly programme.

-Sub-programmes 1 to 10

These are weekly sub-programmes which are

activated for a defined date-to-date period. As

the sub-programme number increases, so does

the priority.

-DATE/TIME

This is a programme step composed of a time

and a date which will run in addition to the usual

programme. If there is conflict between this

programme step and another programme step

(SP or weekly), this step has priority.

-Holidays

This programme allows you to define a

permanent ON or OFF from date-to-date.

This programme has the highest priority.

Pressing simultaneously the , , , keysmenu – + ok

allows you to réinitialize the product.

The program is kept in memory.

Press the button to access the programming/menu

setting mode.

All of the programming and adjustments are

based on the following principle :

- the 1st line and/or 2nd line of the display

indicate the requested setting,

- the buttons +/ allow navigation through the-

menus and settings,

- the button ok allows validation.

Pressing the button menu allows you to access

the following settings :

Navigation &

value setting

Validation

Enter in PROGRAMME mode &

return to previous step

election of days of the week

1 = Monday, 2 = Tuesday

... 7 = Sunday.

Canal B command

Canal C comman

Canal D command

Canal A command

CF Antenna (option)

Keyboard locked by PIN code

menu +ok

Reinitializing

Programming

PROGRAM SETTINGS FUNCTIONS

DATE-TIME

S/W TIME

LANGUAGE

FACTORY

SETTINGS

BACK

AUTO

PROGRAM

CREATE

PROGRAM

READ

PROGRAM

MODIFY

PROGRAM

DELETE

PROGRAM

COPY

BACK

AUTO

COUNTER

CYCLE

PIN CODE

BACK

AUTO

6LE001666A1

z4 channel programmer

annual and weekly cycle

with programming key

User instructions

TYA720

6LE001666A

DCF antenna (optional)

Addressing button

Produkt Specifikationer

Mærke:	Hager
Kategori:	Ikke kategoriseret
Model:	TYA720

Har du brug for hjælp?

Hvis du har brug for hjælp til Hager TYA720 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Hager Manualer

Hager LLD100 Manual

12 Januar 2025

Hager Vision VKG004A-T Manual

11 Januar 2025

Hager GS11019016 Manual

30 December 2025

30 December 2025

30 December 2025

30 December 2025

30 December 2025

30 December 2025

9 December 2024

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Foppapedretti Kalor Manual

27 Januar 2025

OSD Audio Black NC8 Manual

27 Januar 2025

OSD Audio Black NC6W Manual

27 Januar 2025

Velbus VMBSTART-B-10 Manual

27 Januar 2025

Velbus VMBSTART-W-10 Manual

27 Januar 2025

RYOBI DS1200 Manual

27 Januar 2025

RYOBI RY80BG02 Manual

27 Januar 2025

Artecta LED Dim-12 Manual

27 Januar 2025

Artecta LED Dim-1 MKII Manual

27 Januar 2025

NeoMounts NMPRO-C22 Manual

27 Januar 2025