Hähnel Viper TTL Transmitter Manual

Hähnel Flashenhed Viper TTL Transmitter

Læs nedenfor 📖 manual på dansk for Hähnel Viper TTL Transmitter (9 sider) i kategorien Flashenhed. Denne guide var nyttig for 61 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/9
Quick Start
Guide
Transmitter
What’s in the box
The Viper TTL transmitter included is used together with the Viper TTL receiver
(sold separately) or the Modus 600RT Speedlight (sold separately). The Viper
TTL transmitter wirelessly control three separate groups A, B or C a multiple of
Modus 600RT Speedlight’s or other Speedlight’s tted with the Viper TTL receiver
You must ensure that you have the correct Viper TTL transmitter brand type (Canon,
Nikon or Sony) e.g. A Viper TTL transmitter “Canon” will only work with a “Canon”
type Viper TTL receiver or Modus 600RT
The Viper TTL transmitter is powered by any AA battery types which are readily
available in the market
You may check our website www.hahnel.ie for more information of available Viper
TTL receivers and Modus 600RT Speedlight’s
Group Power Control setting for Manual
and TTL FEC
From the Viper TTL transmitter you can adjust the power level of each group
which is in mode<M>
From the Viper TTL transmitter you can adjust the FEC level of each group
which is in mode<TTL>
Simultaneous Group power adjustment - FEC
adjustment
From the Viper TTL transmitter you can easily adjust the output power level and
FEC setting for all groups
Multi : Stroboscopic Flash
With stroboscopic ash, a rapid series of ashes are red. It can be used to
capture multiple images of a moving subject in a single photo.
For “Sony” version the Multi stroboscopic mode is only available when used with
the hähnel Modus 600RT Speedlight.
High Speed Sync
With high-speed sync (FP ash), the ash can synchronise with all shutter
speeds
For “Nikon” version ensure also that the camera setting is set to 1/320’s (Auto
FP) or 1/320’s (Auto FP). Both Viper transmitter and Camera menu must be set to
HSS. Refer to camera manual for more info.
Second Curtain Sync
In second curtain sync the ash ashes right before the shutter closes
For “Nikon” version, the Second Curtain Sync (Rear-curtain sync) is not controlled
from the Viper TTL. To enable Second Curtain Sync set in the camera menu to
Rear-curtain sync. Refer to camera manual for more info
For “Sony” version the Second Curtain Sync is controlled by the Menu setting of
the camera. Refer to camera manual for more info.
High Speed Sync
With high-speed sync (FP ash), the ash can synchronise with all shutter
speeds
For “Nikon” version ensure also that the camera setting is set to 1/320’s (Auto
FP) or 1/320’s (Auto FP). Both Viper transmitter and Camera menu must be set
to HSS. Refer to camera manual for more info.
Viper TTL Controls
08
06
05 04
A B C
07
09
01
03
02
Transmitter
(A) Group A
(B) Group B
(C) Group C
(1) ON/OFF Switch
(2) SEL – select button
(3) Adjust Dial – To adjust
settings
(4) Lock wheel
(5) LCD
(6) Power / Status LED
(7) Hot shoe
(8) Test Button
(9) Micro USB – rmware
update
Transmitter LCD Screen
23
22
20
21
1918
17
Multi Mode
262524
B CA
(17) Manual / TTL / OFF Mode
(18) Flash exposure compensation
amount
(19) Manual ash output
(20) High-speed sync
(21) Second curtain sync
Group A - On Multi mode
Group B - Off
Group C - Multi ModeOn
(22) Always On
(23) Battery indicator
(24) Number of ashes
(25) Flash frequency
(26) Flash output power
Group A - OFF
Group A - ON
A
A A B C
hnel
/MODUS 600RT
GROUP A
hnel
/MODUS 600RT
GROUP B
Viper TTL
Transmitter
MASTER
Viper TTL RX with
3rd Party Speedlight
GROUP C
Set up


Produkt Specifikationer

Mærke: Hähnel
Kategori: Flashenhed
Model: Viper TTL Transmitter

Har du brug for hjælp?

Hvis du har brug for hjælp til Hähnel Viper TTL Transmitter stil et spørgsmål nedenfor, og andre brugere vil svare dig