Harley Benton PowerPlant PowerBank+ Manual

Harley Benton Ikke kategoriseret PowerPlant PowerBank+

Læs nedenfor 📖 manual på dansk for Harley Benton PowerPlant PowerBank+ (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
PowerPlant PowerBank+
Read and follow the safety instructions and all other instructions. Keep the manual
for future reference. If you pass the product to another person, please pass the user
manual with it.
Technical specications
Charging time: 6 hours
Battery capacity: 96.2 Wh (7.4 V / 13,000 mAh)
Charging current: 12 V DC / 2000 mA
Polarity: centre negative / outer barrel positive
Supply voltage (AC adapter): 100 – 240 V ~, 50/60 Hz
Output voltage:
1 × 9 / 12 / 18 / 24 V @ max. 2000 mA
2 × 5 V @ max. 2400 mA (USB)
Dimensions (W × H × D): 138 mm × 105 mm × 39 mm
Weight: 660 g
Features
Chargeable power supply
Automatic overload and short circuit protection
High end battery adapter with high capacity for eect pedals
Charging during playing
Usable for the most multiple power supplies available on the market, as
Harley Benton, Strymon, MXR, Palmer, VoodooLab, CIOKS, etc.
USB ports for charging smartphones and tablets
Charging of up to 8 eect pedals simultaneously with the daisy chain
cable
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 473801 / 03.03.2020
EN
For the packaging, environmentally friendly materials have been chosen that can
be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are pro-
perly disposed of. Do not just dispose of these materials with your normal house-
hold waste, but make sure that they are collected for recycling. Please follow the
notes and markings on the packaging.
Batteries do contain some hazardous chemicals so they should not be thrown away
with the normal household waste. They should be returned to the manufacturer for
disposal or recycled elsewhere in accordance with your local regulations. Remove
lithium batteries from the device before disposal. Protect used lithium batteries
against potential short circuits, e.g. by covering the poles with adhesive tape. Dis-
pose the built-in lithium batteries together with the device. Please check for an
appropriate reception facility.
This product is subject to the European Waste Electrical and Electronic Equipment
Directive (WEEE) in its currently valid version. Do not dispose with your normal
household waste. Dispose of this device through an approved waste disposal rm
or through your local waste facility. When discarding the device, comply with the
rules and regulations that apply in your country. If in doubt, consult your local was-
te disposal facility.
Safety instructions
Intended use
This device is designed to charge batteries of eect pedals and other devices. Any other
use or use under other operating conditions is considered to be improper and may re-
sult in personal injury or property damage. No liability will be assumed for damages
resulting from improper use.
External power supply
The device is powered by an AC adaptor plug. Before connecting the AC adaptor plug,
ensure that the input voltage (AC outlet) matches the voltage rating of the device and
that the AC outlet is protected by a residual current circuit breaker. Failure to do so could
result in damage to the device and possibly the user.
Unplug the AC adaptor plug before electrical storms occur and when the device is
unused for long periods of time to reduce the risk of electric shock or re.
Danger for children
Ensure that plastic bags, packaging, etc. are properly disposed of and are not
in the reach of babies and young children. Choking hazard! Ensure that chil-
dren do not touch the powerbank. They could swallow small parts and cho-
ke! Never let children play unattended with the electrical devices.
Incorrect handling of lithium batteries can result in injury
In the event of a short circuit, overheating or mechanical damage, lithium
batteries can cause severe injuries.
Connections and operating elements
ö Blue LEDs; indicate which output voltage has been chosen
# Button to choose the output voltage
$ Button to turn on and o the device by pressing it for 3 seconds
% Green LEDs; indicate the charging status of the battery;
blink during charging the battery
& Connection for the power adapter
' USB ports
( DC output plug for connecting the devices to be charged
$
&
%
ö
#
'
(
Scope of delivery
1 × power adapter (12 V DC, 2000 mA)
1 × DC cable connector 4.0 × 1.7 mm to connector 5.5 × 2.1 mm
1 × DC cable connector 4.0 × 1.7 mm to plug 5.5 × 2.1 mm
1 × EIAJ-05 converter (connector 4.0 × 1.7 mm to connector EIAJ-05)
to Power Strymon power supplies
1 × daisy chain cable 1-8


Produkt Specifikationer

Mærke: Harley Benton
Kategori: Ikke kategoriseret
Model: PowerPlant PowerBank+

Har du brug for hjælp?

Hvis du har brug for hjælp til Harley Benton PowerPlant PowerBank+ stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Harley Benton Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024