HeadRush Pedalboard Manual

HeadRush Ikke kategoriseret Pedalboard

Læs nedenfor 📖 manual på dansk for HeadRush Pedalboard (41 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 29 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/41
User Guide English
Manual Version 2.1.2
2
Table of Contents
Introduction ....................................... 3
Box Contents ................................. 3
Support .......................................... 3
Features ............................................ 4
Top Panel ....................................... 4
Rear Panel ...................................... 5
Setup ................................................. 7
Operation .......................................... 8
Main Screen ................................... 8
Overview ............................................. 8
Basic Operations ............................... 8
Reverb/Delay Tail Spillover ............... 9
Signal Path ......................................... 10
Stereo vs. Mono ................................ 11
Footswitch Modes ........................ 12
Stomp Mode ..................................... 12
Rig Mode ........................................... 12
Hybrid Mode ..................................... 13
Setlist Mode ...................................... 13
Song Mode ........................................ 13
Rigs .............................................. 14
Creating a New Rig .......................... 14
Optimizing Your Signal Chain .......... 15
Saving a Rig ....................................... 15
Deleting a Rig .................................... 16
Adjusting Settings .......................... 17
Overview ............................................ 17
Parameters ........................................ 18
Saving a Preset ................................ 20
Hardware Assign .......................... 21
Footswitches .................................... 22
Quick Parameters ........................... 23
Expression Pedal ............................. 24
Setlists .......................................... 25
Song View ......................................... 26
Hands-Free Mode ........................ 28
Looper .......................................... 29
External MIDI Control ................... 31
Global Settings ............................. 32
USB .............................................. 37
Transferring Files & Settings .......... 37
Recording ......................................... 38
Reamping ......................................... 38
Screen Lock ................................. 39
Technical Specifications .................. 40
Trademarks & Licenses ................... 40
3
Introduction
Box Contents
HeadRush Pedalboard
USB Cable
Power Cable
Software Download Card
Quickstart Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system requirements,
compatibility information, etc.) and product registration, visit headrushfx.com.
For additional product support, visit headrushfx.com/support.
18
Parameters
Listed below are some of the parameters that you can adjust for each type of rig item. The types include amps,
cabs, effects, input settings, output settings, and mix settings (if you are using a split signal path). See Saving a
Preset to learn how to save a preset after adjusting parameters.
Amp
The Amp category is a list of popular guitar amplifiers.
Preset: This is the current amp preset, which includes
the model, all of its settings, and its color assignment.
Model: This is the amp model.
Amp Settings: These are the settings for the selected
amp model (different models may have more or fewer
settings).
Cab Link: This setting determines whether or not a
specific cab and microphone are associated with the
amp. When this is set to Off, any cab and
microphone used in the current rig will be completely
independent of the amp you select. When this is set
to On, a specific cab and microphone combination
will be used if you change the amp’s Preset setting
or if you load a new amp to the rig. You can change
the cab and microphone manually afterward by
adjusting the parameters of the cab model.
Color: This is the assigned color, which will appear in the Hardware Assign screen and the switch indicator if
the amp is assigned to a switch.
Cab
The Cab category is a list of popular amp cabinets, which
contain the speakers. The HeadRush Pedalboard recreates
not only the sound of the cabinet but also the type of
microphone recording it.
Preset: This is the current cab preset, which includes
the model, all of its settings, and its color assignment.
Cab Type: This is the cab type. Numbers notated as
_X__ indicate the number of speakers it has and the
size of each speaker (e.g., 2X12 denotes a cab with
two 12-inch speakers, 4X10 denotes a cab with four
10-inch speakers). Numbers notated as __W indicate
the emulated wattage (output power) of the speaker.
Mic Type: This is the type of microphone being used on the cab. You can select different models of dynamic
(Dyn), condenser (Cond), or ribbon (Ribbon) microphones.
Mic Settings: These are the settings for the microphone:
Break Up: This determines the amount of speaker “breakup”—the natural distortion that occurs when the
audio signal overdrives the speaker.
On-Axis: This determines the microphone position relative to the cab. On-axis placement (On) positions the
microphone at the center of the speaker, usually resulting in a brighter sound with more definition. Off-axis
placement (Off) is slightly offset at an angle from the center of the speaker and it often sounds darker in tone.
Out Gain: This is the cab’s output gain level.
Color: This is the assigned color, which will appear in the Hardware Assign screen and the switch indicator if
the cab is assigned to a switch.
19
Effects
There are several types of available effects. Their adjustable settings depend on the type of effect.
In
These input settings control the signal sent through the
models of your rig:
Preset: This is the current input preset, which includes
its settings on the right edge of the display and its
locked/unlocked state.
Parameters: This menu determines whether these
input settings are locked or unlocked.
• When unlocked, the settings will change to
the new rig’s input settings each time you
load a new rig. The lock icon on the main
screen will be gray.
• When locked, the settings will be retained as
“global” input settings, regardless of the rig.
The lock icon on the main screen will be red.
Rig Input: This setting determines whether the rig’s input signal is taken from the guitar input (Guitar) or the
right (R) return input (FX Ret R). This menu is shown only when Rig Input is set to Per Rig (in the global
settings (see Global Settings to learn about this).
Input Level Meter: This level meter indicates the current level of your input signal before the input controls
shown on this screen.
Gain: This setting controls the gain level of the signal sent from your guitar into your rig. The available range is
-60.0 dB to 12.0 .
Gate Thrsh (Threshold): This setting controls the signal level required to open the noise gate, enabling the
guitar signal to be sent to the rig. The available range is -120.0 to 0.0 dB. The threshold is represented by a
white line on the input level meter.
Gate Rel (Release): This setting controls the amount of time it will take for the noise gate to close once the
incoming guitar signal stops. The available range is 1–3000 ms.
USB Level: This setting controls the level of the audio signal sent from your computer to the HeadRush
Pedalboard over a USB connection. The available range is -60.0 to 12.0 dB .
20
Out
These output settings control the signal sent to the HeadRush
Pedalboard outputs:
Preset: This is the current output preset, which includes
its settings on the right edge of the display.
Rig Output: This level meter indicates the current level
of your output signal after the output controls shown
on this screen. You can set which outputs will send
this signal in the Global Settings screen. See Global
Settings to learn about this.
Alternate Output: This level meter indicates the current
level of your output signal. You can set which outputs
will send this signal in the Global Settings screen. The
To Amp Gain setting controls the level of this signal
unless the Alternate Output source is set to Rig
Input. See Global Settings to learn about this.
Rig Vol (Volume): This setting controls the level of the audio signal sent from the outputs. The available range
is -60.0 to 36.0 dB.
To Amp Gain: This setting controls the gain level of the signal of the Alternate Output unless the Alternate
Output source is set to Rig Input (see Global Settings to learn about this). The available range is -60.0 to
12.0 dB.
Rig Width: This setting controls how much of the stereo field the output signal uses. 100% uses the full
stereo field, while 0% produces a mono signal. This affects stereo signals only, not mono signals. See Main
Screen > Stereo vs. Mono to learn how the HeadRush Pedalboard handles stereo and mono signals.
Mix
These settings control mix of a split signal path. This is
available only for rigs with split signal paths (see Main Screen
> Signal Path to learn more):
Preset: This is the current mix preset, which includes its
settings on the right edge of the display.
A Lev / B Lev (Level): These settings control the volume
levels the upper (A) and lower (B) branches of the
signal path. The range is -60.0 dB to +12.0 dB.
A Pan / B Pan: These settings control the panning
(position in the stereo field) the upper (A B) and lower ( )
branches of the signal path. The range is -100% to
+100%.
A/B Delay: This setting controls a timing offset between the upper (A) and lower (B) branches of the signal
path. The range is -30000μs to +30000μs. If the value is negative (-), the A branch is delayed. If the value is
positive (+), the B branch is delayed.
Saving a Preset
To save a preset, tap Save in the upper-right corner.
To save your changes to the current preset, tap Save.
To save your changes as a new preset, tap Save New
Preset, use the keyboard that appears to enter a name,
and then tap Save.
To return to the previous screen without saving, tap Cancel at any time.

Produkt Specifikationer

Mærke: HeadRush
Kategori: Ikke kategoriseret
Model: Pedalboard

Har du brug for hjælp?

Hvis du har brug for hjælp til HeadRush Pedalboard stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret HeadRush Manualer

HeadRush

HeadRush Expression Pedal Manual

6 September 2024
HeadRush

HeadRush Prime Manual

5 September 2024
HeadRush

HeadRush MX5 Manual

5 September 2024
HeadRush

HeadRush Pedalboard Manual

5 September 2024
HeadRush

HeadRush Looperboard Manual

5 September 2024
HeadRush

HeadRush Core Manual

27 August 2024
HeadRush

HeadRush Gigboard Manual

24 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterpik

Waterpik WP-490 Manual

10 April 2025
Daikin

Daikin EAVX16S18DA9WG Manual

10 April 2025
Daikin

Daikin RXYLQ40T7Y1B Manual

10 April 2025
Daikin

Daikin RXYLQ42T7Y1B Manual

10 April 2025
Daikin

Daikin ETVZ16S23EA6V7 Manual

10 April 2025
Daikin

Daikin FXMA200AXVMB Manual

10 April 2025
Daikin

Daikin FXZQ15A2VEB Manual

10 April 2025
Daikin

Daikin ETVZ16S18EA9W Manual

9 April 2025
Daikin

Daikin DSR1 Manual

9 April 2025
Simplified MFG

Simplified MFG SP18CAT120 Manual

9 April 2025